Re: [PATCH v2] clk: si5351: Add PLL soft reset

2015-11-20 Thread Sebastian Hesselbarth
On 20.11.2015 18:22, Jacob Siverskog wrote: This is according to figure 12 ("I2C Programming Procedure") in "Si5351A/B/C Data Sheet" (https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351-B.pdf). Without the PLL soft reset, we were unable to get three outputs working at the same time.

[PATCH v2] clk: si5351: Add PLL soft reset

2015-11-20 Thread Jacob Siverskog
This is according to figure 12 ("I2C Programming Procedure") in "Si5351A/B/C Data Sheet" (https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351-B.pdf). Without the PLL soft reset, we were unable to get three outputs working at the same time. According to Silicon Labs support, performing

[PATCH v2] clk: si5351: Add PLL soft reset

2015-11-20 Thread Jacob Siverskog
Hi! A representative from SiLabs writes: "All the currently published versions of the Si5351 (v1.0) and AN619 (v0.6) do not include the “Si5351A/C only” disclaimer. Based on this and our current understanding, I see no issue performing a PLLB reset for ‘B’ type devices.". Hence, it should not be an