Add bass redirection controls for surround outputs. This uses the DSP to
redirect audio below the bass redirection crossover frequency to the LFE
channel from the front/rear L/R speakers. This only goes into effect if
the speakers aren't set as full range, and only if the surround
configuration has an LFE channel.
Signed-off-by: Connor McAdams <conmanx...@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 130 +++++++++++++++++++++++++++++++++--
1 file changed, 126 insertions(+), 4 deletions(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 469cefe9a51a..8ad2fc5ab30b 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -149,6 +149,8 @@ enum {
SPEAKER_CHANNEL_CFG_ENUM,
SPEAKER_FULL_RANGE_FRONT,
SPEAKER_FULL_RANGE_REAR,
+ BASS_REDIRECTION,
+ BASS_REDIRECTION_XOVER,
#define EFFECTS_COUNT (EFFECT_END_NID - EFFECT_START_NID)
};
@@ -1123,6 +1125,8 @@ struct ca0132_spec {
unsigned char speaker_range_val[2];
unsigned char mic_boost_enum_val;
unsigned char smart_volume_setting;
+ unsigned char bass_redirection_val;
+ long bass_redirect_xover_freq;
long fx_ctl_val[EFFECT_LEVEL_SLIDERS];
long xbass_xover_freq;
long eq_preset_val;
@@ -4324,6 +4328,35 @@ static int ca0132_alt_set_full_range_speaker(struct
hda_codec *codec)
return 0;
}
+static int ca0132_alt_surround_set_bass_redirection(struct hda_codec *codec,
+ bool val)
+{
+ struct ca0132_spec *spec = codec->spec;
+ unsigned int tmp;
+ int err;
+
+ if (val && spec->channel_cfg_val != SPEAKER_CHANNELS_4_0 &&
+ spec->channel_cfg_val != SPEAKER_CHANNELS_2_0)
+ tmp = FLOAT_ONE;
+ else
+ tmp = FLOAT_ZERO;
+
+ err = dspio_set_uint_param(codec, 0x96, SPEAKER_BASS_REDIRECT, tmp);
+ if (err < 0)
+ return err;
+
+ /* If it is enabled, make sure to set the crossover frequency. */
+ if (tmp) {
+ tmp = float_xbass_xover_lookup[spec->xbass_xover_freq];
+ err = dspio_set_uint_param(codec, 0x96,
+ SPEAKER_BASS_REDIRECT_XOVER_FREQ, tmp);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
/*
* These are the commands needed to setup output on each of the different card
* types.
@@ -4593,6 +4626,15 @@ static int ca0132_alt_select_out(struct hda_codec *codec)
ca0132_effects_set(codec, X_BASS,
spec->effects_switch[X_BASS - EFFECT_START_NID]);
+ if (spec->cur_out_type == SURROUND_OUT)
+ err = ca0132_alt_surround_set_bass_redirection(codec,
+ spec->bass_redirection_val);
+ else
+ err = ca0132_alt_surround_set_bass_redirection(codec, 0);
+
+ if (err < 0)
+ goto exit;
+
/* run through the output dsp commands for the selected output. */
for (i = 0; i < alt_out_presets[spec->cur_out_type].commands; i++) {
err = dspio_set_uint_param(codec,
@@ -5282,6 +5324,18 @@ static int ca0132_vnode_switch_set(struct snd_kcontrol
*kcontrol,
return ret;
}
/* End of control change helpers. */
+
+static void ca0132_alt_bass_redirection_xover_set(struct hda_codec *codec,
+ long idx)
+{
+ snd_hda_power_up(codec);
+
+ dspio_set_param(codec, 0x96, 0x20, SPEAKER_BASS_REDIRECT_XOVER_FREQ,
+ &(float_xbass_xover_lookup[idx]), sizeof(unsigned int));
+
+ snd_hda_power_down(codec);
+}
+
/*
* Below I've added controls to mess with the effect levels, I've only enabled
* them on the Sound Blaster Z, but they would probably also work on the
@@ -5290,6 +5344,7 @@ static int ca0132_vnode_switch_set(struct snd_kcontrol
*kcontrol,
*/
/* Sets DSP effect level from the sliders above the controls */
+
static int ca0132_alt_slider_ctl_set(struct hda_codec *codec, hda_nid_t nid,
const unsigned int *lookup, int idx)
{
@@ -5335,8 +5390,12 @@ static int ca0132_alt_xbass_xover_slider_ctl_get(struct
snd_kcontrol *kcontrol,
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct ca0132_spec *spec = codec->spec;
long *valp = ucontrol->value.integer.value;
+ hda_nid_t nid = get_amp_nid(kcontrol);
- *valp = spec->xbass_xover_freq;
+ if (nid == BASS_REDIRECTION_XOVER)
+ *valp = spec->bass_redirect_xover_freq;
+ else
+ *valp = spec->xbass_xover_freq;
return 0;
}
@@ -5391,16 +5450,25 @@ static int ca0132_alt_xbass_xover_slider_put(struct
snd_kcontrol *kcontrol,
struct ca0132_spec *spec = codec->spec;
hda_nid_t nid = get_amp_nid(kcontrol);
long *valp = ucontrol->value.integer.value;
+ long *cur_val;
int idx;
+ if (nid == BASS_REDIRECTION_XOVER)
+ cur_val = &spec->bass_redirect_xover_freq;
+ else
+ cur_val = &spec->xbass_xover_freq;
+
/* any change? */
- if (spec->xbass_xover_freq == *valp)
+ if (*cur_val == *valp)
return 0;
- spec->xbass_xover_freq = *valp;
+ *cur_val = *valp;
idx = *valp;
- ca0132_alt_slider_ctl_set(codec, nid, float_xbass_xover_lookup, idx);
+ if (nid == BASS_REDIRECTION_XOVER)
+ ca0132_alt_bass_redirection_xover_set(codec, *cur_val);
+ else
+ ca0132_alt_slider_ctl_set(codec, nid, float_xbass_xover_lookup,
idx);
return 0;
}
@@ -5968,6 +6036,11 @@ static int ca0132_switch_get(struct snd_kcontrol
*kcontrol,
return 0;
}
+ if (nid == BASS_REDIRECTION) {
+ *valp = spec->bass_redirection_val;
+ return 0;
+ }
+
return 0;
}
@@ -6054,6 +6127,14 @@ static int ca0132_switch_put(struct snd_kcontrol
*kcontrol,
changed = 0;
}
+ if (nid == BASS_REDIRECTION) {
+ spec->bass_redirection_val = *valp;
+ if (spec->cur_out_type == SURROUND_OUT)
+ ca0132_alt_surround_set_bass_redirection(codec, *valp);
+
+ changed = 0;
+ }
+
exit:
snd_hda_power_down(codec);
return changed;
@@ -6436,6 +6517,39 @@ static int ca0132_alt_add_rear_full_range_switch(struct
hda_codec *codec)
snd_ctl_new1(&knew, codec));
}
+/*
+ * Bass redirection redirects audio below the crossover frequency to the LFE
+ * channel on speakers that are set as not being full-range. On configurations
+ * without an LFE channel, it does nothing. Bass redirection seems to be the
+ * replacement for X-Bass on configurations with an LFE channel.
+ */
+static int ca0132_alt_add_bass_redirection_crossover(struct hda_codec *codec)
+{
+ const char *namestr = "Bass Redirection Crossover";
+ struct snd_kcontrol_new knew =
+ HDA_CODEC_VOLUME_MONO(namestr, BASS_REDIRECTION_XOVER, 1, 0,
+ HDA_OUTPUT);
+
+ knew.tlv.c = NULL;
+ knew.info = ca0132_alt_xbass_xover_slider_info;
+ knew.get = ca0132_alt_xbass_xover_slider_ctl_get;
+ knew.put = ca0132_alt_xbass_xover_slider_put;
+
+ return snd_hda_ctl_add(codec, BASS_REDIRECTION_XOVER,
+ snd_ctl_new1(&knew, codec));
+}
+
+static int ca0132_alt_add_bass_redirection_switch(struct hda_codec *codec)
+{
+ const char *namestr = "Bass Redirection";
+ struct snd_kcontrol_new knew =
+ CA0132_CODEC_MUTE_MONO(namestr, BASS_REDIRECTION, 1,
+ HDA_OUTPUT);
+
+ return snd_hda_ctl_add(codec, BASS_REDIRECTION,
+ snd_ctl_new1(&knew, codec));
+}
+
/*
* Create an Input Source enumerated control for the alternate ca0132 codecs
* because the front microphone has no auto-detect, and Line-in has to be set
@@ -6749,6 +6863,12 @@ static int ca0132_build_controls(struct hda_codec *codec)
if (err < 0)
return err;
err = ca0132_alt_add_rear_full_range_switch(codec);
+ if (err < 0)
+ return err;
+ err = ca0132_alt_add_bass_redirection_crossover(codec);
+ if (err < 0)
+ return err;
+ err = ca0132_alt_add_bass_redirection_switch(codec);
if (err < 0)
return err;
err = ca0132_alt_add_mic_boost_enum(codec);
@@ -8102,6 +8222,8 @@ static void ca0132_init_chip(struct hda_codec *codec)
spec->xbass_xover_freq = 8;
for (i = 0; i < EFFECT_LEVEL_SLIDERS; i++)
spec->fx_ctl_val[i] = effect_slider_defaults[i];
+
+ spec->bass_redirect_xover_freq = 8;
}
spec->voicefx_val = 0;
--
2.20.1
