On 19/11/14 17:10, Dr. H. Nikolaus Schaller wrote:
>> You don't need to ask. The connector calls invert_vid_out_polarity
>> before enabling the output.
>
> Unfortunately it doesn’t. At least not always.
>
> It does only for pdata systems but not for DT based systems:
>
> if (!ddata->dev->
Am 13.11.2014 um 17:41 schrieb Tomi Valkeinen :
> On 13/11/14 18:25, Dr. H. Nikolaus Schaller wrote:
>> Hi,
>>
>> Am 13.11.2014 um 12:51 schrieb Tomi Valkeinen :
>>
>>> On 13/11/14 00:10, Marek Belisko wrote:
opa362 is amplifier for video and can be connected to the tvout pads
of the
On 13/11/14 18:25, Dr. H. Nikolaus Schaller wrote:
> Hi,
>
> Am 13.11.2014 um 12:51 schrieb Tomi Valkeinen :
>
>> On 13/11/14 00:10, Marek Belisko wrote:
>>> opa362 is amplifier for video and can be connected to the tvout pads
>>> of the OMAP3. It has one gpio control for enable/disable of the ou
Hi,
Am 13.11.2014 um 12:51 schrieb Tomi Valkeinen :
> On 13/11/14 00:10, Marek Belisko wrote:
>> opa362 is amplifier for video and can be connected to the tvout pads
>> of the OMAP3. It has one gpio control for enable/disable of the output
>> (high impedance).
>>
>> Signed-off-by: H. Nikolaus Sc
On 13/11/14 00:10, Marek Belisko wrote:
> opa362 is amplifier for video and can be connected to the tvout pads
> of the OMAP3. It has one gpio control for enable/disable of the output
> (high impedance).
>
> Signed-off-by: H. Nikolaus Schaller
> ---
> drivers/video/fbdev/omap2/displays-new/Kconf
opa362 is amplifier for video and can be connected to the tvout pads
of the OMAP3. It has one gpio control for enable/disable of the output
(high impedance).
Signed-off-by: H. Nikolaus Schaller
---
drivers/video/fbdev/omap2/displays-new/Kconfig | 6 +
drivers/video/fbdev/omap2/displays-new
6 matches
Mail list logo
