The Webasto Common Communication Board Version 2 is a i.MX6UL based
board.
Signed-off-by: Rouven Czerwinski <r.czerwin...@pengutronix.de>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts | 472 +++++++++++++++++++++
2 files changed, 473 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ce66ffd5a1bb..757e415a7979 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -626,6 +626,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
+ imx6ul-webasto-ccbV2.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
imx6ull-colibri-wifi-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts
b/arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts
new file mode 100644
index 000000000000..5c3bca6d2698
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-webasto-ccbv2.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2019, Webasto SE
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+ model = "Webasto common communication board version 2";
+ compatible = "webasto,imx6ul-ccbv2", "fsl,imx6ul";
+
+ chosen {
+ stdout-path = &uart7;
+ };
+
+ reg_4v: regulator-4v {
+ compatible = "regulator-fixed";
+ regulator-name = "V_+4V";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_wl18xx_vmmc: regulator-wl18xx {
+ compatible = "regulator-fixed";
+ regulator-name = "wl1837";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ reg_dp83822_en: regulator-dp83822 {
+ compatible = "regulator-fixed";
+ regulator-name = "dp83822";
+ vin-supply = <&vcc_eth>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-supply = <®_dp83822_en>;
+ phy-handle = <&dp83822i>;
+ phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp83822i: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ pmic: mc34pf3000@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-name = "V_+3V3_SW1A";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+ vdd_soc_in: sw1b {
+ regulator-name = "V_+1V4_SW1B";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-ramp-delay = <6250>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ sw2_reg: sw2 {
+ regulator-name = "V_+3V3_SW2";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ vcc_ddr3: sw3 {
+ regulator-name = "V_+1V35_SW3";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ swbst_reg: swbst {
+ regulator-name = "V_+5V0_SWBST";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+ vdd_snvs: vsnvs {
+ regulator-name = "V_+3V0_SNVS";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ vrefddr: vrefddr {
+ regulator-name = "V_+0V675_VREFDDR";
+ vin-supply = <&vcc_ddr3>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ /* 3V3 Supply: i.MX6 modules */
+ vgen1_reg: vldo1 {
+ regulator-name = "V_+3V3_LDO1";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ vdd_high_in: v33 {
+ regulator-name = "V_+3V3_V33";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ vcc_eth: vldo3 {
+ regulator-name = "V_+1V8_LDO3";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ vgen6_reg: vldo4 {
+ regulator-name = "V_+1V8_LDO4";
+ vin-supply = <®_4v>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ cs-gpios = <
+ &gpio3 26 GPIO_ACTIVE_LOW
+ &gpio3 10 GPIO_ACTIVE_LOW
+ &gpio3 12 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+
+ cc2520: spi@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cc2520>;
+ compatible = "ti,cc2520";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ fifo-gpio = <&gpio3 15 0>;
+ fifop-gpio = <&gpio3 16 0>;
+ sfd-gpio = <&gpio3 24 0>;
+ cca-gpio = <&gpio3 20 0>;
+ vreg-gpio = <&gpio3 19 0>;
+ reset-gpio = <&gpio3 23 0>;
+ vin-supply = <&sw2_reg>;
+ status = "okay";
+ };
+ qca7000: spi@1 {
+ compatible = "qca,qca7000";
+ reg = <1>;
+ spi-max-frequency = <8000000>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 0x1>;
+ spi-cpha;
+ spi-cpol;
+ status = "okay";
+ };
+ tfr7970: spi@2 {
+ compatible = "ti,trf7970a";
+ reg = <3>;
+ spi-max-frequency = <2000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_trf7970>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <14 0>;
+ ti,enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>, <&gpio3 17
GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_4v>;
+ vdd-io-supply = <&sw2_reg>;
+ autosuspend-delay = <30000>;
+ clock-frequency = <27120000>;
+ status = "okay";
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ uart-has-rtscts;
+ status = "okay";
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_4v>;
+ };
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ vmmc-supply = <®_wl18xx_vmmc>;
+ non-removable;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ max-frequency = <25000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <8>;
+ vmmc-supply = <&sw1a_reg>;
+ no-1-8-v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_minipcie>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+®_arm {
+ vin-supply = <&vdd_soc_in>;
+ regulator-allow-bypass;
+};
+
+®_soc {
+ vin-supply = <&vdd_soc_in>;
+ regulator-allow-bypass;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x13030
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x13030
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10000
+ >;
+ };
+
+ pinctrl_minipcie: minipciegrp {
+ fsl,pins = <
+ /* HYS=1, 100k PullDown, 50MHz, R0/6 */
+ MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x13030
+ MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x13030
+ MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x13030
+ MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x13030
+ MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x13030
+ >;
+ };
+
+ pinctrl_spi1: spi1grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x1b0b0
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x1b0b0
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x1b0b0
+ MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x17030
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x17030
+ MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x17030
+ MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x10030
+ >;
+ };
+
+ pinctrl_cc2520: cc2520grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x13030
+ MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x13030
+ MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x13030
+ MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x13030
+ MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x13030
+ MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x13030
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x17030
+
+ >;
+ };
+
+ pinctrl_trf7970: trf7970grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x17030
+ MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x10030
+ MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x10030
+ MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x17000
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x1b0b0
+ MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x1b0b0
+ MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x1b0b0
+ MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x1b0b0
+ MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x13030
+ MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x13030
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x13030
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0
+ MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b0
+ MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b0
+ MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b0
+ MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x10030
+ MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x00010
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b0
+ MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x10059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x10059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x10059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x10059
+ MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x17000
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10030
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100e9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x100e9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x100e9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x100e9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x100e9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x100e9
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x100e9
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x100e9
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x100e9
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x100e9
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10030
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x00b0
+ >;
+ };
+};
--
2.29.2
