On Wed, Jan 03, 2018 at 12:12:09PM +0530, Kedareswara rao Appana wrote:
> If the hardware is configured for Scatter Gather(SG) mode,
> and hardware is idle, in the control register SG mode bit
> must be set to a 0 then back to 1 by the software, to force
> the CDMA SG engine to use a new value
On Wed, Jan 03, 2018 at 12:12:09PM +0530, Kedareswara rao Appana wrote:
> If the hardware is configured for Scatter Gather(SG) mode,
> and hardware is idle, in the control register SG mode bit
> must be set to a 0 then back to 1 by the software, to force
> the CDMA SG engine to use a new value
If the hardware is configured for Scatter Gather(SG) mode,
and hardware is idle, in the control register SG mode bit
must be set to a 0 then back to 1 by the software, to force
the CDMA SG engine to use a new value written to the CURDESC_PNTR
register, failure to do so could result errors from the
If the hardware is configured for Scatter Gather(SG) mode,
and hardware is idle, in the control register SG mode bit
must be set to a 0 then back to 1 by the software, to force
the CDMA SG engine to use a new value written to the CURDESC_PNTR
register, failure to do so could result errors from the
4 matches
Mail list logo