On Sun, Jan 03, 2021 at 04:00:07AM -0600, Samuel Holland wrote:
> On boards where the only peripheral connected to PL0/PL1 is an X-Powers
> PMIC, configure the connection to use the RSB bus rather than the I2C
> bus. Compared to the I2C controller that shares the pins, the RSB
> controller allows
On Wed, Jan 13, 2021 at 5:16 PM Chen-Yu Tsai wrote:
>
> On Thu, Jan 7, 2021 at 6:27 PM Samuel Holland wrote:
> >
> > On 1/6/21 5:38 AM, Chen-Yu Tsai wrote:
> > > On Wed, Jan 6, 2021 at 7:06 PM Maxime Ripard wrote:
> > >>
> > >> On Mon, Jan 04, 2021 at 10:54:19AM +, André Przywara wrote:
> >
On Thu, Jan 7, 2021 at 6:27 PM Samuel Holland wrote:
>
> On 1/6/21 5:38 AM, Chen-Yu Tsai wrote:
> > On Wed, Jan 6, 2021 at 7:06 PM Maxime Ripard wrote:
> >>
> >> On Mon, Jan 04, 2021 at 10:54:19AM +, André Przywara wrote:
> >>> On 03/01/2021 10:00, Samuel Holland wrote:
> On boards
On 1/6/21 5:38 AM, Chen-Yu Tsai wrote:
> On Wed, Jan 6, 2021 at 7:06 PM Maxime Ripard wrote:
>>
>> On Mon, Jan 04, 2021 at 10:54:19AM +, André Przywara wrote:
>>> On 03/01/2021 10:00, Samuel Holland wrote:
On boards where the only peripheral connected to PL0/PL1 is an X-Powers
PMIC,
On Wed, Jan 6, 2021 at 7:06 PM Maxime Ripard wrote:
>
> On Mon, Jan 04, 2021 at 10:54:19AM +, André Przywara wrote:
> > On 03/01/2021 10:00, Samuel Holland wrote:
> > > On boards where the only peripheral connected to PL0/PL1 is an X-Powers
> > > PMIC, configure the connection to use the RSB
On Mon, Jan 04, 2021 at 10:54:19AM +, André Przywara wrote:
> On 03/01/2021 10:00, Samuel Holland wrote:
> > On boards where the only peripheral connected to PL0/PL1 is an X-Powers
> > PMIC, configure the connection to use the RSB bus rather than the I2C
> > bus. Compared to the I2C controller
On 1/4/21 4:54 AM, André Przywara wrote:
> On 03/01/2021 10:00, Samuel Holland wrote:
>> On boards where the only peripheral connected to PL0/PL1 is an X-Powers
>> PMIC, configure the connection to use the RSB bus rather than the I2C
>> bus. Compared to the I2C controller that shares the pins, the
On 03/01/2021 10:00, Samuel Holland wrote:
> On boards where the only peripheral connected to PL0/PL1 is an X-Powers
> PMIC, configure the connection to use the RSB bus rather than the I2C
> bus. Compared to the I2C controller that shares the pins, the RSB
> controller allows a higher bus
On boards where the only peripheral connected to PL0/PL1 is an X-Powers
PMIC, configure the connection to use the RSB bus rather than the I2C
bus. Compared to the I2C controller that shares the pins, the RSB
controller allows a higher bus frequency, and it is more CPU-efficient.
Signed-off-by:
9 matches
Mail list logo