On Sun, Nov 17, 2013 at 06:46:20PM +0100, Andreas Werner wrote:
> Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
> the driver will print a lot of error messages if there was no ACK
> received.
>
> i2cdetect normally print a table with all the available devices. If there
> is
Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
the driver will print a lot of error messages if there was no ACK
received.
i2cdetect normally print a table with all the available devices. If there
is no device on the address, the table will be empty.
Currently with the
Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
the driver will print a lot of error messages if there was no ACK
received.
i2cdetect normally print a table with all the available devices. If there
is no device on the address, the table will be empty.
Currently with the
On Sun, Nov 17, 2013 at 06:46:20PM +0100, Andreas Werner wrote:
Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
the driver will print a lot of error messages if there was no ACK
received.
i2cdetect normally print a table with all the available devices. If there
is no
4 matches
Mail list logo