Signed-off-by: Scott Telford <stelf...@cadence.com>
---
 .../devicetree/bindings/phy/phy-cadence-dp.txt     | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-dp.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt 
b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
new file mode 100644
index 0000000..7f49fd54e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
@@ -0,0 +1,30 @@
+Cadence MHDP DisplayPort SD0801 PHY binding
+===========================================
+
+This binding describes the Cadence SD0801 PHY hardware included with
+the Cadence MHDP DisplayPort controller.
+
+-------------------------------------------------------------------------------
+Required properties (controller (parent) node):
+- compatible   : Should be "cdns,dp-phy"
+- reg          : Defines the following sets of registers in the parent
+                 mhdp device:
+                       - Offset of the DPTX PHY configuration registers
+                       - Offset of the SD0801 PHY configuration registers
+- #phy-cells   : from the generic PHY bindings, must be 0.
+
+Optional properties:
+- num_lanes    : Number of DisplayPort lanes to use (1, 2 or 4)
+- max_bit_rate : Maximum DisplayPort link bit rate to use, in Mbps (2160,
+                 2430, 2700, 3240, 4320, 5400 or 8100)
+-------------------------------------------------------------------------------
+
+Example:
+       dp_phy: phy@f0fb030a00 {
+               compatible = "cdns,dp-phy";
+               reg = <0xf0 0xfb030a00 0x0 0x00000040>,
+                     <0xf0 0xfb500000 0x0 0x00100000>;
+               num_lanes = <4>;
+               max_bit_rate = <8100>;
+               #phy-cells = <0>;
+       };
-- 
2.2.2

Reply via email to