Fix brace placement errors caught by checkpatch.pl
ERROR: that open brace { should be on the previous line

Signed-off-by: Juston Li <juston.h...@gmail.com>
---
 drivers/staging/sm750fb/ddk750_chip.h    | 12 +++----
 drivers/staging/sm750fb/ddk750_display.c | 56 ++++++++++----------------------
 drivers/staging/sm750fb/ddk750_display.h |  3 +-
 drivers/staging/sm750fb/ddk750_dvi.c     |  6 ++--
 drivers/staging/sm750fb/ddk750_dvi.h     |  3 +-
 drivers/staging/sm750fb/ddk750_hwi2c.c   |  6 ++--
 drivers/staging/sm750fb/ddk750_mode.c    | 13 +++-----
 drivers/staging/sm750fb/ddk750_mode.h    |  6 ++--
 drivers/staging/sm750fb/ddk750_power.c   | 27 +++++----------
 drivers/staging/sm750fb/ddk750_power.h   |  3 +-
 drivers/staging/sm750fb/ddk750_sii164.c  | 16 +++------
 drivers/staging/sm750fb/ddk750_sii164.h  |  3 +-
 drivers/staging/sm750fb/sm750_accel.c    | 45 ++++++++-----------------
 drivers/staging/sm750fb/sm750_cursor.c   | 23 +++++--------
 drivers/staging/sm750fb/sm750_hw.c       | 27 ++++++---------
 15 files changed, 82 insertions(+), 167 deletions(-)

diff --git a/drivers/staging/sm750fb/ddk750_chip.h 
b/drivers/staging/sm750fb/ddk750_chip.h
index 4e030e8..6ff0436 100644
--- a/drivers/staging/sm750fb/ddk750_chip.h
+++ b/drivers/staging/sm750fb/ddk750_chip.h
@@ -8,8 +8,7 @@
 #include <linux/io.h>
 
 /* This is all the chips recognized by this library */
-typedef enum _logical_chip_type_t
-{
+typedef enum _logical_chip_type_t {
        SM_UNKNOWN,
        SM718,
        SM750,
@@ -18,8 +17,7 @@ typedef enum _logical_chip_type_t
 logical_chip_type_t;
 
 
-typedef enum _clock_type_t
-{
+typedef enum _clock_type_t {
        MXCLK_PLL,
        PRIMARY_PLL,
        SECONDARY_PLL,
@@ -28,8 +26,7 @@ typedef enum _clock_type_t
 }
 clock_type_t;
 
-typedef struct _pll_value_t
-{
+typedef struct _pll_value_t {
        clock_type_t clockType;
        unsigned long inputFreq; /* Input clock frequency to the PLL */
 
@@ -42,8 +39,7 @@ typedef struct _pll_value_t
 pll_value_t;
 
 /* input struct to initChipParam() function */
-typedef struct _initchip_param_t
-{
+typedef struct _initchip_param_t {
        unsigned short powerMode;    /* Use power mode 0 or 1 */
        unsigned short chipClock;    /**
                                      * Speed of main chip clock in MHz unit
diff --git a/drivers/staging/sm750fb/ddk750_display.c 
b/drivers/staging/sm750fb/ddk750_display.c
index 4a3cb86..a64ea32 100644
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -15,12 +15,10 @@ static void setDisplayControl(int ctrl, int dispState)
        cnt = 0;
 
        /* Set the primary display control */
-       if (!ctrl)
-       {
+       if (!ctrl) {
                ulDisplayCtrlReg = PEEK32(PANEL_DISPLAY_CTRL);
                /* Turn on/off the Panel display control */
-               if (dispState)
-               {
+               if (dispState) {
                        /* Timing should be enabled first before enabling the 
plane
                         * because changing at the same time does not guarantee 
that
                         * the plane will also enabled or disabled.
@@ -45,16 +43,13 @@ static void setDisplayControl(int ctrl, int dispState)
                         * until a few delay. Need to write
                         * and read it a couple times
                         */
-                       do
-                       {
+                       do {
                                cnt++;
                                POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
                        } while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) 
!=
                                        (ulDisplayCtrlReg & ~ulReservedBits));
                        printk("Set Panel Plane enbit:after tried %d times\n", 
cnt);
-               }
-               else
-               {
+               } else {
                        /* When turning off, there is no rule on the programming
                         * sequence since whenever the clock is off, then it 
does not
                         * matter whether the plane is enabled or disabled.
@@ -71,14 +66,11 @@ static void setDisplayControl(int ctrl, int dispState)
                        POKE32(PANEL_DISPLAY_CTRL, ulDisplayCtrlReg);
                }
 
-       }
-       /* Set the secondary display control */
-       else
-       {
+       } else {
+               /* Set the secondary display control */
                ulDisplayCtrlReg = PEEK32(CRT_DISPLAY_CTRL);
 
-               if (dispState)
-               {
+               if (dispState) {
                        /* Timing should be enabled first before enabling the 
plane because changing at the
                           same time does not guarantee that the plane will 
also enabled or disabled.
                           */
@@ -100,16 +92,13 @@ static void setDisplayControl(int ctrl, int dispState)
                                FIELD_SET(0, CRT_DISPLAY_CTRL, RESERVED_3_MASK, 
ENABLE) |
                                FIELD_SET(0, CRT_DISPLAY_CTRL, RESERVED_4_MASK, 
ENABLE);
 
-                       do
-                       {
+                       do {
                                cnt++;
                                POKE32(CRT_DISPLAY_CTRL, ulDisplayCtrlReg);
                        } while ((PEEK32(CRT_DISPLAY_CTRL) & ~ulReservedBits) !=
                                        (ulDisplayCtrlReg & ~ulReservedBits));
                                printk("Set Crt Plane enbit:after tried %d 
times\n", cnt);
-               }
-               else
-               {
+               } else {
                        /* When turning off, there is no rule on the programming
                         * sequence since whenever the clock is off, then it 
does not
                         * matter whether the plane is enabled or disabled.
@@ -140,16 +129,13 @@ static void waitNextVerticalSync(int ctrl, int delay)
                if ((FIELD_GET(PEEK32(PANEL_PLL_CTRL), PANEL_PLL_CTRL, POWER) ==
                         PANEL_PLL_CTRL_POWER_OFF) ||
                        (FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL), 
PANEL_DISPLAY_CTRL, TIMING) ==
-                        PANEL_DISPLAY_CTRL_TIMING_DISABLE))
-               {
+                        PANEL_DISPLAY_CTRL_TIMING_DISABLE)) {
                        return;
                }
 
-               while (delay-- > 0)
-               {
+               while (delay-- > 0) {
                        /* Wait for end of vsync. */
-                       do
-                       {
+                       do {
                                status = FIELD_GET(PEEK32(SYSTEM_CTRL),
                                                   SYSTEM_CTRL,
                                                   PANEL_VSYNC);
@@ -157,8 +143,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
                        while (status == SYSTEM_CTRL_PANEL_VSYNC_ACTIVE);
 
                        /* Wait for start of vsync. */
-                       do
-                       {
+                       do {
                                status = FIELD_GET(PEEK32(SYSTEM_CTRL),
                                                   SYSTEM_CTRL,
                                                   PANEL_VSYNC);
@@ -173,16 +158,13 @@ static void waitNextVerticalSync(int ctrl, int delay)
                if ((FIELD_GET(PEEK32(CRT_PLL_CTRL), CRT_PLL_CTRL, POWER) ==
                         CRT_PLL_CTRL_POWER_OFF) ||
                        (FIELD_GET(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, 
TIMING) ==
-                        CRT_DISPLAY_CTRL_TIMING_DISABLE))
-               {
+                        CRT_DISPLAY_CTRL_TIMING_DISABLE)) {
                        return;
                }
 
-               while (delay-- > 0)
-               {
+               while (delay-- > 0) {
                        /* Wait for end of vsync. */
-                       do
-                       {
+                       do {
                                status = FIELD_GET(PEEK32(SYSTEM_CTRL),
                                                                   SYSTEM_CTRL,
                                                                   CRT_VSYNC);
@@ -190,8 +172,7 @@ static void waitNextVerticalSync(int ctrl, int delay)
                        while (status == SYSTEM_CTRL_CRT_VSYNC_ACTIVE);
 
                        /* Wait for start of vsync. */
-                       do
-                       {
+                       do {
                                status = FIELD_GET(PEEK32(SYSTEM_CTRL),
                                                                   SYSTEM_CTRL,
                                                                   CRT_VSYNC);
@@ -293,8 +274,7 @@ int ddk750_initDVIDisp(void)
                     1,  /* Enable continuous Sync */
                     1,  /* Enable PLL Filter */
                     4   /* Use the recommended value for PLL Filter value */
-                    ) != 0) && (dviGetVendorID() != 0x0000) && 
(dviGetDeviceID() != 0x0000))
-       {
+                    ) != 0) && (dviGetVendorID() != 0x0000) && 
(dviGetDeviceID() != 0x0000)) {
                return (-1);
        }
 
diff --git a/drivers/staging/sm750fb/ddk750_display.h 
b/drivers/staging/sm750fb/ddk750_display.h
index afdf201..abccf84 100644
--- a/drivers/staging/sm750fb/ddk750_display.h
+++ b/drivers/staging/sm750fb/ddk750_display.h
@@ -86,8 +86,7 @@
        CRT means crt path DSUB
 */
 #if 0
-typedef enum _disp_output_t
-{
+typedef enum _disp_output_t {
        NO_DISPLAY = DPMS_OFF,
 
        LCD1_PRI = PNL_2_PRI|PRI_TP_ON|PNL_SEQ_ON|DPMS_OFF|DAC_ON,
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c 
b/drivers/staging/sm750fb/ddk750_dvi.c
index c42db85..a18bb4c 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -9,8 +9,7 @@
 /* This global variable contains all the supported driver and its corresponding
    function API. Please set the function pointer to NULL whenever the function
    is not supported. */
-static dvi_ctrl_device_t g_dcftSupportedDviController[] =
-{
+static dvi_ctrl_device_t g_dcftSupportedDviController[] = {
 #ifdef DVI_CTRL_SII164
        {
                .pfnInit = sii164InitChip,
@@ -45,8 +44,7 @@ int dviInit(
 {
        dvi_ctrl_device_t *pCurrentDviCtrl;
        pCurrentDviCtrl = g_dcftSupportedDviController;
-       if (pCurrentDviCtrl->pfnInit != NULL)
-       {
+       if (pCurrentDviCtrl->pfnInit != NULL) {
                return pCurrentDviCtrl->pfnInit(edgeSelect, busSelect, 
dualEdgeClkSelect, hsyncEnable,
                                                vsyncEnable, deskewEnable, 
deskewSetting, continuousSyncEnable,
                                                pllFilterEnable, 
pllFilterValue);
diff --git a/drivers/staging/sm750fb/ddk750_dvi.h 
b/drivers/staging/sm750fb/ddk750_dvi.h
index 83bbd6d..e1d4c9a 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.h
+++ b/drivers/staging/sm750fb/ddk750_dvi.h
@@ -26,8 +26,7 @@ typedef unsigned char (*PFN_DVICTRL_CHECKINTERRUPT)(void);
 typedef void (*PFN_DVICTRL_CLEARINTERRUPT)(void);
 
 /* Structure to hold all the function pointer to the DVI Controller. */
-typedef struct _dvi_ctrl_device_t
-{
+typedef struct _dvi_ctrl_device_t {
        PFN_DVICTRL_INIT                pfnInit;
        PFN_DVICTRL_RESETCHIP           pfnResetChip;
        PFN_DVICTRL_GETCHIPSTRING       pfnGetChipString;
diff --git a/drivers/staging/sm750fb/ddk750_hwi2c.c 
b/drivers/staging/sm750fb/ddk750_hwi2c.c
index 7f3b1f9..5ddac43 100644
--- a/drivers/staging/sm750fb/ddk750_hwi2c.c
+++ b/drivers/staging/sm750fb/ddk750_hwi2c.c
@@ -106,8 +106,7 @@ static unsigned int hwI2CWriteData(
         * Note:
         *      Only 16 byte can be accessed per i2c start instruction.
         */
-       do
-       {
+       do {
                /* Reset I2C by writing 0 to I2C_RESET register to clear the 
previous status. */
                POKE32(I2C_RESET, 0);
 
@@ -173,8 +172,7 @@ static unsigned int hwI2CReadData(
         * Note:
         *      Only 16 byte can be accessed per i2c start instruction.
         */
-       do
-       {
+       do {
                /* Reset I2C by writing 0 to I2C_RESET register to clear all 
the status. */
                POKE32(I2C_RESET, 0);
 
diff --git a/drivers/staging/sm750fb/ddk750_mode.c 
b/drivers/staging/sm750fb/ddk750_mode.c
index 3d8b06d..9d10446 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -80,8 +80,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, 
pll_value_t *pll)
        int ret = 0;
        int cnt = 0;
        unsigned int ulTmpValue, ulReg;
-       if (pll->clockType == SECONDARY_PLL)
-       {
+       if (pll->clockType == SECONDARY_PLL) {
                /* programe secondary pixel clock */
                POKE32(CRT_PLL_CTRL, formatPllReg(pll));
                POKE32(CRT_HORIZONTAL_TOTAL,
@@ -119,9 +118,7 @@ static int programModeRegisters(mode_parameter_t 
*pModeParam, pll_value_t *pll)
                         POKE32(CRT_DISPLAY_CTRL, ulTmpValue|ulReg);
                }
 
-       }
-       else if (pll->clockType == PRIMARY_PLL)
-       {
+       } else if (pll->clockType == PRIMARY_PLL) {
                unsigned int ulReservedBits;
                POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
 
@@ -170,16 +167,14 @@ static int programModeRegisters(mode_parameter_t 
*pModeParam, pll_value_t *pll)
 
                POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
 #if 1
-               while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != 
(ulTmpValue|ulReg))
-               {
+               while ((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != 
(ulTmpValue|ulReg)) {
                        cnt++;
                        if (cnt > 1000)
                                break;
                        POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
                }
 #endif
-       }
-       else {
+       } else {
                ret = -1;
        }
        return ret;
diff --git a/drivers/staging/sm750fb/ddk750_mode.h 
b/drivers/staging/sm750fb/ddk750_mode.h
index 3548d67..e846dc2 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -3,16 +3,14 @@
 
 #include "ddk750_chip.h"
 
-typedef enum _spolarity_t
-{
+typedef enum _spolarity_t {
        POS = 0, /* positive */
        NEG, /* negative */
 }
 spolarity_t;
 
 
-typedef struct _mode_parameter_t
-{
+typedef struct _mode_parameter_t {
        /* Horizontal timing. */
        unsigned long horizontal_total;
        unsigned long horizontal_display_end;
diff --git a/drivers/staging/sm750fb/ddk750_power.c 
b/drivers/staging/sm750fb/ddk750_power.c
index 28d4402..c545c2d 100644
--- a/drivers/staging/sm750fb/ddk750_power.c
+++ b/drivers/staging/sm750fb/ddk750_power.c
@@ -36,8 +36,7 @@ void setPowerMode(unsigned int powerMode)
        if (getChipType() == SM750LE)
                return;
 
-       switch (powerMode)
-       {
+       switch (powerMode) {
        case POWER_MODE_CTRL_MODE_MODE0:
                control_value = FIELD_SET(control_value, POWER_MODE_CTRL, MODE, 
MODE0);
                break;
@@ -55,16 +54,13 @@ void setPowerMode(unsigned int powerMode)
        }
 
        /* Set up other fields in Power Control Register */
-       if (powerMode == POWER_MODE_CTRL_MODE_SLEEP)
-       {
+       if (powerMode == POWER_MODE_CTRL_MODE_SLEEP) {
                control_value =
 #ifdef VALIDATION_CHIP
                FIELD_SET(control_value, POWER_MODE_CTRL, 336CLK, OFF) |
 #endif
                FIELD_SET(control_value, POWER_MODE_CTRL, OSC_INPUT,  OFF);
-       }
-       else
-       {
+       } else {
                control_value =
 #ifdef VALIDATION_CHIP
                FIELD_SET(control_value, POWER_MODE_CTRL, 336CLK, ON) |
@@ -84,8 +80,7 @@ void setCurrentGate(unsigned int gate)
        /* Get current power mode. */
        mode = getPowerMode();
 
-       switch (mode)
-       {
+       switch (mode) {
        case POWER_MODE_CTRL_MODE_MODE0:
                gate_reg = MODE0_GATE;
                break;
@@ -111,13 +106,10 @@ void enable2DEngine(unsigned int enable)
        uint32_t gate;
 
        gate = PEEK32(CURRENT_GATE);
-       if (enable)
-       {
+       if (enable) {
                gate = FIELD_SET(gate, CURRENT_GATE, DE,  ON);
                gate = FIELD_SET(gate, CURRENT_GATE, CSC, ON);
-       }
-       else
-       {
+       } else {
                gate = FIELD_SET(gate, CURRENT_GATE, DE,  OFF);
                gate = FIELD_SET(gate, CURRENT_GATE, CSC, OFF);
        }
@@ -135,8 +127,7 @@ void enableZVPort(unsigned int enable)
 
        /* Enable ZV Port Gate */
        gate = PEEK32(CURRENT_GATE);
-       if (enable)
-       {
+       if (enable) {
                gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, ON);
 #if 1
                /* Using Software I2C */
@@ -145,9 +136,7 @@ void enableZVPort(unsigned int enable)
                /* Using Hardware I2C */
                gate = FIELD_SET(gate, CURRENT_GATE, I2C,    ON);
 #endif
-       }
-       else
-       {
+       } else {
                /* Disable ZV Port Gate. There is no way to know whether the 
GPIO pins are being used
                 or not. Therefore, do not disable the GPIO gate. */
                gate = FIELD_SET(gate, CURRENT_GATE, ZVPORT, OFF);
diff --git a/drivers/staging/sm750fb/ddk750_power.h 
b/drivers/staging/sm750fb/ddk750_power.h
index a20d438..b7cf6b2 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -1,8 +1,7 @@
 #ifndef DDK750_POWER_H__
 #define DDK750_POWER_H__
 
-typedef enum _DPMS_t
-{
+typedef enum _DPMS_t {
        crtDPMS_ON = 0x0,
        crtDPMS_STANDBY = 0x1,
        crtDPMS_SUSPEND = 0x2,
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c 
b/drivers/staging/sm750fb/ddk750_sii164.c
index 7f58fbe..a5153be 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -136,8 +136,7 @@ long sii164InitChip(
 #endif
 
        /* Check if SII164 Chip exists */
-       if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() 
== SII164_DEVICE_ID))
-       {
+       if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() 
== SII164_DEVICE_ID)) {
                /*
                 *  Initialize SII164 controller chip.
                 */
@@ -183,8 +182,7 @@ long sii164InitChip(
                else
                        config = SII164_DESKEW_ENABLE;
 
-               switch (deskewSetting)
-               {
+               switch (deskewSetting) {
                case 0:
                        config |= SII164_DESKEW_1_STEP;
                        break;
@@ -286,15 +284,12 @@ void sii164SetPower(
        unsigned char config;
 
        config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
-       if (powerUp == 1)
-       {
+       if (powerUp == 1) {
                /* Power up the chip */
                config &= ~SII164_CONFIGURATION_POWER_MASK;
                config |= SII164_CONFIGURATION_POWER_NORMAL;
                i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
-       }
-       else
-       {
+       } else {
                /* Power down the chip */
                config &= ~SII164_CONFIGURATION_POWER_MASK;
                config |= SII164_CONFIGURATION_POWER_DOWN;
@@ -314,8 +309,7 @@ static void sii164SelectHotPlugDetectionMode(
        unsigned char detectReg;
 
        detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & 
~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
-       switch (hotPlugMode)
-       {
+       switch (hotPlugMode) {
        case SII164_HOTPLUG_DISABLE:
                detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
                break;
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h 
b/drivers/staging/sm750fb/ddk750_sii164.h
index 0996a32..f2610c9 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -4,8 +4,7 @@
 #define USE_DVICHIP
 
 /* Hot Plug detection mode structure */
-typedef enum _sii164_hot_plug_mode_t
-{
+typedef enum _sii164_hot_plug_mode_t {
        SII164_HOTPLUG_DISABLE = 0,         /* Disable Hot Plug output bit 
(always high). */
        SII164_HOTPLUG_USE_MDI,             /* Use Monitor Detect Interrupt 
bit. */
        SII164_HOTPLUG_USE_RSEN,            /* Use Receiver Sense detect bit. */
diff --git a/drivers/staging/sm750fb/sm750_accel.c 
b/drivers/staging/sm750fb/sm750_accel.c
index 866bb99..f7a617e 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -96,8 +96,7 @@ int hw_fillrect(struct lynx_accel *accel,
 {
        u32 deCtrl;
 
-       if (accel->de_wait() != 0)
-       {
+       if (accel->de_wait() != 0) {
                /* int time wait and always busy,seems hardware
                 * got something error */
                pr_debug("%s:De engine always bussy\n", __func__);
@@ -159,11 +158,9 @@ unsigned int rop2)   /* ROP value */
        de_ctrl = 0;
 
        /* If source and destination are the same surface, need to check for 
overlay cases */
-       if (sBase == dBase && sPitch == dPitch)
-       {
+       if (sBase == dBase && sPitch == dPitch) {
                /* Determine direction of operation */
-               if (sy < dy)
-               {
+               if (sy < dy) {
                        /* +----------+
                           |S         |
                           |   +----------+
@@ -174,9 +171,7 @@ unsigned int rop2)   /* ROP value */
                           +----------+ */
 
                        nDirection = BOTTOM_TO_TOP;
-               }
-               else if (sy > dy)
-               {
+               } else if (sy > dy) {
                        /* +----------+
                           |D         |
                           |   +----------+
@@ -187,13 +182,10 @@ unsigned int rop2)   /* ROP value */
                           +----------+ */
 
                        nDirection = TOP_TO_BOTTOM;
-               }
-               else
-               {
+               } else {
                        /* sy == dy */
 
-                       if (sx <= dx)
-                       {
+                       if (sx <= dx) {
                                /* +------+---+------+
                                   |S     |   |     D|
                                   |      |   |      |
@@ -202,9 +194,7 @@ unsigned int rop2)   /* ROP value */
                                   +------+---+------+ */
 
                                nDirection = RIGHT_TO_LEFT;
-                       }
-                       else
-                       {
+                       } else {
                        /* sx > dx */
 
                                /* +------+---+------+
@@ -219,8 +209,7 @@ unsigned int rop2)   /* ROP value */
                }
        }
 
-       if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT))
-       {
+       if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) {
                sx += width - 1;
                sy += height - 1;
                dx += width - 1;
@@ -255,8 +244,7 @@ unsigned int rop2)   /* ROP value */
                write_dpr(accel, DE_PITCH,
                                FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
                                FIELD_VALUE(0, DE_PITCH, SOURCE,      sPitch)); 
/* dpr10 */
-       }
-       else
+       } else
 #endif
        {
                write_dpr(accel, DE_PITCH,
@@ -344,8 +332,7 @@ int hw_imageblit(struct lynx_accel *accel,
        ul4BytesPerScan = ulBytesPerScan & ~3;
        ulBytesRemain = ulBytesPerScan & 3;
 
-       if (accel->de_wait() != 0)
-       {
+       if (accel->de_wait() != 0) {
                return -1;
        }
 
@@ -371,8 +358,7 @@ int hw_imageblit(struct lynx_accel *accel,
                                FIELD_VALUE(0, DE_PITCH, DESTINATION, dPitch) |
                                FIELD_VALUE(0, DE_PITCH, SOURCE,      dPitch)); 
/* dpr10 */
 
-       }
-       else
+       } else
 #endif
        {
                write_dpr(accel, DE_PITCH,
@@ -414,16 +400,13 @@ int hw_imageblit(struct lynx_accel *accel,
        write_dpr(accel, DE_CONTROL, de_ctrl | deGetTransparency(accel));
 
        /* Write MONO data (line by line) to 2D Engine data port */
-       for (i = 0; i < height; i++)
-       {
+       for (i = 0; i < height; i++) {
                /* For each line, send the data in chunks of 4 bytes */
-               for (j = 0; j < (ul4BytesPerScan/4); j++)
-               {
+               for (j = 0; j < (ul4BytesPerScan/4); j++) {
                        write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 
4)));
                }
 
-               if (ulBytesRemain)
-               {
+               if (ulBytesRemain) {
                        memcpy(ajRemain, pSrcbuf+ul4BytesPerScan, 
ulBytesRemain);
                        write_dpPort(accel, *(unsigned int *)ajRemain);
                }
diff --git a/drivers/staging/sm750fb/sm750_cursor.c 
b/drivers/staging/sm750fb/sm750_cursor.c
index 4ed7ca2..ab61fe6 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -122,8 +122,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
                odd=0;
 */
 
-       for (i = 0; i < count; i++)
-       {
+       for (i = 0; i < count; i++) {
                color = *pcol++;
                mask = *pmsk++;
                data = 0;
@@ -137,11 +136,10 @@ void hw_cursor_setData(struct lynx_cursor *cursor,
                else
                        opr = mask & color;
 
-               for (j = 0; j < 8; j++)
-               {
+               for (j = 0; j < 8; j++) {
 
-                       if (opr & (0x80 >> j))
-                       {       /* use fg color,id = 2 */
+                       if (opr & (0x80 >> j)) {
+                               /* use fg color,id = 2 */
                                data |= 2 << (j*2);
                        } else {
                                /* use bg color,id = 1 */
@@ -204,8 +202,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
        pstart = cursor->vstart;
        pbuffer = pstart;
 
-       for (i = 0; i < count; i++)
-       {
+       for (i = 0; i < count; i++) {
                color = *pcol++;
                mask = *pmsk++;
                data = 0;
@@ -217,11 +214,10 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
                else
                        opr = mask & color;
 
-               for (j = 0; j < 8; j++)
-               {
+               for (j = 0; j < 8; j++) {
 
-                       if (opr & (0x80 >> j))
-                       {       /* use fg color,id = 2 */
+                       if (opr & (0x80 >> j)) {
+                               /* use fg color,id = 2 */
                                data |= 2 << (j*2);
                        } else {
                                /* use bg color,id = 1 */
@@ -237,8 +233,7 @@ void hw_cursor_setData2(struct lynx_cursor *cursor,
                iowrite16(data, pbuffer);
 
                /* assume pitch is 1,2,4,8,...*/
-               if (!(i&(pitch-1)))
-               {
+               if (!(i&(pitch-1))) {
                        /* need a return */
                        pstart += offset;
                        pbuffer = pstart;
diff --git a/drivers/staging/sm750fb/sm750_hw.c 
b/drivers/staging/sm750fb/sm750_hw.c
index d397382..20a8d3b 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -44,8 +44,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* 
pdev)
         * successfully
         * */
 
-       if ((ret = pci_request_region(pdev, 1, "sm750fb")))
-       {
+       if ((ret = pci_request_region(pdev, 1, "sm750fb"))) {
                pr_err("Can not request PCI regions.\n");
                goto exit;
        }
@@ -78,8 +77,7 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* 
pdev)
 
        /* reserve the vidmem space of smi adaptor */
 #if 0
-       if ((ret = pci_request_region(pdev, 0, _moduleName_)))
-       {
+       if ((ret = pci_request_region(pdev, 0, _moduleName_))) {
                pr_err("Can not request PCI regions.\n");
                goto exit;
        }
@@ -130,8 +128,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct 
pci_dev *pdev)
        ddk750_initDVIDisp();
 #endif
 
-       if (getChipType() != SM750LE)
-       {
+       if (getChipType() != SM750LE) {
                /* does user need CRT ?*/
                if (spec_share->state.nocrt) {
                        POKE32(MISC_CTRL,
@@ -177,8 +174,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct 
pci_dev *pdev)
                /* Customer may NOT use CH7301 DVI chip, which has to be
                   initialized differently.
                 */
-               if (swI2CReadReg(0xec, 0x4a) == 0x95)
-               {
+               if (swI2CReadReg(0xec, 0x4a) == 0x95) {
                        /* The following register values for CH7301 are from
                           Chrontel app note and our experiment.
                         */
@@ -426,11 +422,11 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort 
index,
        return 0;
 }
 
-int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) {
+int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank)
+{
        int dpms, crtdb;
 
-       switch (blank)
-       {
+       switch (blank) {
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
                case FB_BLANK_UNBLANK:
 #else
@@ -486,8 +482,7 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int 
blank)
 
        dpms = pps = crtdb = 0;
 
-       switch (blank)
-       {
+       switch (blank) {
 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 10)
                case FB_BLANK_UNBLANK:
 #else
@@ -585,8 +580,7 @@ int hw_sm750le_deWait(void)
                unsigned int dwVal = PEEK32(DE_STATE2);
                if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == 
DE_STATE2_DE_STATUS_IDLE) &&
                        (FIELD_GET(dwVal, DE_STATE2, DE_FIFO)  == 
DE_STATE2_DE_FIFO_EMPTY) &&
-                       (FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) == 
DE_STATE2_DE_MEM_FIFO_EMPTY))
-               {
+                       (FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) == 
DE_STATE2_DE_MEM_FIFO_EMPTY)) {
                        return 0;
                }
        }
@@ -602,8 +596,7 @@ int hw_sm750_deWait(void)
                unsigned int dwVal = PEEK32(SYSTEM_CTRL);
                if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == 
SYSTEM_CTRL_DE_STATUS_IDLE) &&
                        (FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO)  == 
SYSTEM_CTRL_DE_FIFO_EMPTY) &&
-                       (FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) == 
SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
-               {
+                       (FIELD_GET(dwVal, SYSTEM_CTRL, DE_MEM_FIFO) == 
SYSTEM_CTRL_DE_MEM_FIFO_EMPTY)) {
                        return 0;
                }
        }
-- 
2.4.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to