Re: [PATCH v5] wlcore: spi: add wl18xx support

"Reizer, Eyal" writes: > Add support for using with both wl12xx and wl18xx. > > - all wilink family needs special init command for entering wspi mode. > extra clock cycles should be sent after the spi init command while the > cs pin is high. > - Use inverted chip select for

Re: [PATCH v5] wlcore: spi: add wl18xx support

"Reizer, Eyal" writes: > Add support for using with both wl12xx and wl18xx. > > - all wilink family needs special init command for entering wspi mode. > extra clock cycles should be sent after the spi init command while the > cs pin is high. > - Use inverted chip select for sending a dummy 4

[PATCH v5] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

[PATCH v5] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

Re: [PATCH v5] wlcore: spi: add wl18xx support

On Sun, Jul 10, 2016 at 08:32:40AM +, Reizer, Eyal wrote: > Add support for using with both wl12xx and wl18xx. > > - all wilink family needs special init command for entering wspi mode. > extra clock cycles should be sent after the spi init command while the > cs pin is high. > - Use

Re: [PATCH v5] wlcore: spi: add wl18xx support

On Sun, Jul 10, 2016 at 08:32:40AM +, Reizer, Eyal wrote: > Add support for using with both wl12xx and wl18xx. > > - all wilink family needs special init command for entering wspi mode. > extra clock cycles should be sent after the spi init command while the > cs pin is high. > - Use

[PATCH v5] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the

[PATCH v5] wlcore: spi: add wl18xx support

Add support for using with both wl12xx and wl18xx. - all wilink family needs special init command for entering wspi mode. extra clock cycles should be sent after the spi init command while the cs pin is high. - Use inverted chip select for sending a dummy 4 bytes command that completes the