Add I2C device nodes and its properties in bcm-cygnus.dtsi but keep
them disabled there. Individual I2C devices can be enabled in board
specific dts file when I2C slave devices are enabled in the future

Signed-off-by: Ray Jui <r...@broadcom.com>
Reviewed-by: Scott Branden <sbran...@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi 
b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 5126f9e..ff5fb6a 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -70,6 +70,26 @@
                };
        };
 
+       i2c0: i2c@18008000 {
+               compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+               reg = <0x18008000 0x100>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+               clock-frequency = <100000>;
+               status = "disabled";
+       };
+
+       i2c1: i2c@1800b000 {
+               compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+               reg = <0x1800b000 0x100>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+               clock-frequency = <100000>;
+               status = "disabled";
+       };
+
        uart0: serial@18020000 {
                compatible = "snps,dw-apb-uart";
                reg = <0x18020000 0x100>;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to