ROHM BD70528 PMIC includes battery charger block. Support charger
staus queries and doing few basic settings like input current limit
and charging current.

Signed-off-by: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>
---
 drivers/power/supply/Kconfig           |   9 +
 drivers/power/supply/Makefile          |   1 +
 drivers/power/supply/bd70528-charger.c | 738 +++++++++++++++++++++++++++++++++
 3 files changed, 748 insertions(+)
 create mode 100644 drivers/power/supply/bd70528-charger.c

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index e901b9879e7e..903c97a67bf0 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -660,4 +660,13 @@ config FUEL_GAUGE_SC27XX
         Say Y here to enable support for fuel gauge with SC27XX
         PMIC chips.
 
+config CHARGER_BD70528
+       tristate "ROHM bd70528 charger driver"
+       depends on MFD_ROHM_BD70528
+       default n
+       help
+        Say Y here to enable support for getting battery status
+        information and altering charger configurations from charger
+        block of the ROHM BD70528 Power Management IC.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index b731c2a9b695..c60387b04bfa 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_AXP288_CHARGER)  += axp288_charger.o
 obj-$(CONFIG_CHARGER_CROS_USBPD)       += cros_usbpd-charger.o
 obj-$(CONFIG_CHARGER_SC2731)   += sc2731_charger.o
 obj-$(CONFIG_FUEL_GAUGE_SC27XX)        += sc27xx_fuel_gauge.o
+obj-$(CONFIG_CHARGER_BD70528)  += bd70528-charger.o
diff --git a/drivers/power/supply/bd70528-charger.c 
b/drivers/power/supply/bd70528-charger.c
new file mode 100644
index 000000000000..db2824a9d960
--- /dev/null
+++ b/drivers/power/supply/bd70528-charger.c
@@ -0,0 +1,738 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Copyright (C) 2018 ROHM Semiconductors
+//
+// power-supply driver for ROHM BD70528 PMIC
+
+/*
+ * BD70528 charger HW state machine.
+ *
+ * The thermal shutdown state is not drawn. From any other state but
+ * battery error and suspend it is possible to go to TSD/TMP states
+ * if temperature is out of bounds.
+ *
+ *  CHG_RST = H
+ *  or CHG_EN=L
+ *  or (DCIN2_UVLO=L && DCIN1_UVLO=L)
+ *  or (DCIN2_OVLO=H & DCIN1_UVKLO=L)
+ *
+ *  +--------------+         +--------------+
+ *  |              |         |              |
+ *  |  Any state   +-------> |    Suspend   |
+ *  |              |         |              |
+ *  +--------------+         +------+-------+
+ *                                  |
+ *  CHG_EN = H && BAT_DET = H &&    |
+ *  No errors (temp, bat_ov, UVLO,  |
+ *  OVLO...)                        |
+ *                                  |
+ *  BAT_OV or             +---------v----------+
+ *  (DBAT && TTRI)        |                    |
+ *      +-----------------+   Trickle Charge   | <---------------+
+ *      |                 |                    |                 |
+ *      |                 +-------+------------+                 |
+ *      |                         |                              |
+ *      |                         |     ^                        |
+ *      |        V_BAT > VTRI_TH  |     |  VBAT < VTRI_TH - 50mV |
+ *      |                         |     |                        |
+ *      |                         v     |                        |
+ *      |                               |                        |
+ *      |     BAT_OV or      +----------+----+                   |
+ *      |     (DBAT && TFST) |               |                   |
+ *      |   +----------------+  Fast Charge  |                   |
+ *      |   |                |               |                   |
+ *      v   v                +----+----------+                   |
+ *                                |                              |
+ *+----------------+   ILIM_DET=L |    ^ ILIM_DET                |
+ *|                |   & CV_DET=H |    | or CV_DET=L             |
+ *|  Battery Error |   & VBAT >   |    | or VBAT < VRECHG_TH     |
+ *|                |   VRECHG_TH  |    | or IBAT  > IFST/x       |
+ *+----------------+   & IBAT <   |    |                         |
+ *                     IFST/x     v    |                         |
+ *       ^                             |                         |
+ *       |                   +---------+-+                       |
+ *       |                   |           |                       |
+ *       +-------------------+  Top OFF  |                       |
+ *  BAT_OV = H or            |           |                       |
+ *  (DBAT && TFST)           +-----+-----+                       |
+ *                                 |                             |
+ *           Stay top-off for 15s  |                             |
+ *                                 v                             |
+ *                                                               |
+ *                            +--------+                         |
+ *                            |        |                         |
+ *                            |  Done  +-------------------------+
+ *                            |        |
+ *                            +--------+   VBAT < VRECHG_TH
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#define CHG_STAT_SUSPEND       0x0
+#define CHG_STAT_TRICKLE       0x1
+#define CHG_STAT_FAST          0x3
+#define CHG_STAT_TOPOFF                0xe
+#define CHG_STAT_DONE          0xf
+#define CHG_STAT_OTP_TRICKLE   0x10
+#define CHG_STAT_OTP_FAST      0x11
+#define CHG_STAT_OTP_DONE      0x12
+#define CHG_STAT_TSD_TRICKLE   0x20
+#define CHG_STAT_TSD_FAST      0x21
+#define CHG_STAT_TSD_TOPOFF    0x22
+#define CHG_STAT_BAT_ERR       0x7f
+
+static const char *bd70528_charger_model = "BD70528";
+static const char *bd70528_charger_manufacturer = "ROHM Semiconductors";
+
+#define BD_ERR_IRQ_HND(_name_, _wrn_)                                  \
+static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg)     \
+{                                                                      \
+       struct power_supply *psy = (struct power_supply *)arg;          \
+                                                                       \
+       power_supply_changed(psy);                                      \
+       dev_err(&psy->dev, (_wrn_));                                    \
+                                                                       \
+       return IRQ_HANDLED;                                             \
+}
+
+#define BD_INFO_IRQ_HND(_name_, _wrn_)                                 \
+static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg)     \
+{                                                                      \
+       struct power_supply *psy = (struct power_supply *)arg;          \
+                                                                       \
+       power_supply_changed(psy);                                      \
+       dev_dbg(&psy->dev, (_wrn_));                                    \
+                                                                       \
+       return IRQ_HANDLED;                                             \
+}
+
+#define BD_IRQ_HND(_name_) bd0528_##_name_##_interrupt
+
+struct bd70528_psy {
+       struct rohm_regmap_dev chip;
+       struct power_supply *psy;
+};
+
+BD_ERR_IRQ_HND(BAT_OV_DET, "Battery overvoltage detected\n");
+BD_ERR_IRQ_HND(DBAT_DET, "Dead battery detected\n");
+BD_ERR_IRQ_HND(COLD_DET, "Battery cold\n");
+BD_ERR_IRQ_HND(HOT_DET, "Battery hot\n");
+BD_ERR_IRQ_HND(CHG_TSD, "Charger thermal shutdown\n");
+BD_ERR_IRQ_HND(DCIN2_OV_DET, "DCIN2 overvoltage detected\n");
+
+BD_INFO_IRQ_HND(BAT_OV_RES, "Battery voltage back to normal\n");
+BD_INFO_IRQ_HND(COLD_RES, "Battery temperature back to normal\n");
+BD_INFO_IRQ_HND(HOT_RES, "Battery temperature back to normal\n");
+BD_INFO_IRQ_HND(BAT_RMV, "Battery removed\n");
+BD_INFO_IRQ_HND(BAT_DET, "Battery detected\n");
+BD_INFO_IRQ_HND(DCIN2_OV_RES, "DCIN2 voltage back to normal\n");
+BD_INFO_IRQ_HND(DCIN2_RMV, "DCIN2 removed\n");
+BD_INFO_IRQ_HND(DCIN2_DET, "DCIN2 detected\n");
+BD_INFO_IRQ_HND(DCIN1_RMV, "DCIN1 removed\n");
+BD_INFO_IRQ_HND(DCIN1_DET, "DCIN1 detected\n");
+
+struct irq_name_pair {
+       const char *n;
+       irqreturn_t (*h)(int irq, void *arg);
+};
+
+static int bd70528_get_irqs(struct platform_device *pdev,
+                           struct bd70528_psy *bdpsy)
+{
+       int irq, i, ret;
+       unsigned int mask;
+       struct irq_name_pair bd70528_chg_irqs[] = {
+               { .n = "bd70528-bat-ov-res", .h = BD_IRQ_HND(BAT_OV_RES) },
+               { .n = "bd70528-bat-ov-det", .h = BD_IRQ_HND(BAT_OV_DET) },
+               { .n = "bd70528-bat-dead", .h = BD_IRQ_HND(DBAT_DET) },
+               { .n = "bd70528-bat-warmed", .h = BD_IRQ_HND(COLD_RES) },
+               { .n = "bd70528-bat-cold", .h = BD_IRQ_HND(COLD_DET) },
+               { .n = "bd70528-bat-cooled", .h = BD_IRQ_HND(HOT_RES) },
+               { .n = "bd70528-bat-hot", .h = BD_IRQ_HND(HOT_DET) },
+               { .n = "bd70528-chg-tshd", .h = BD_IRQ_HND(CHG_TSD) },
+               { .n = "bd70528-bat-removed", .h = BD_IRQ_HND(BAT_RMV) },
+               { .n = "bd70528-bat-detected", .h = BD_IRQ_HND(BAT_DET) },
+               { .n = "bd70528-dcin2-ov-res", .h = BD_IRQ_HND(DCIN2_OV_RES) },
+               { .n = "bd70528-dcin2-ov-det", .h = BD_IRQ_HND(DCIN2_OV_DET) },
+               { .n = "bd70528-dcin2-removed", .h = BD_IRQ_HND(DCIN2_RMV) },
+               { .n = "bd70528-dcin2-detected", .h = BD_IRQ_HND(DCIN2_DET) },
+               { .n = "bd70528-dcin1-removed", .h = BD_IRQ_HND(DCIN1_RMV) },
+               { .n = "bd70528-dcin1-detected", .h = BD_IRQ_HND(DCIN1_DET) },
+       };
+
+       for (i = 0; i < ARRAY_SIZE(bd70528_chg_irqs); i++) {
+               irq = platform_get_irq_byname(pdev, bd70528_chg_irqs[i].n);
+               if (irq < 0) {
+                       dev_err(&pdev->dev, "Bad IRQ information for %s (%d)\n",
+                               bd70528_chg_irqs[i].n, irq);
+                       return irq;
+               }
+               ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+                                               bd70528_chg_irqs[i].h,
+                                               IRQF_ONESHOT,
+                                               bd70528_chg_irqs[i].n,
+                                               bdpsy->psy);
+
+               if (ret)
+                       return ret;
+       }
+       /*
+        * BD70528 irq controller is not touching the main mask register.
+        * So enable the charger block interrupts at main level. We can just
+        * leave them enabled as irq-controller should disable irqs
+        * from sub-registers when IRQ is disabled or freed.
+        */
+       mask = BD70528_REG_INT_BAT1_MASK | BD70528_REG_INT_BAT2_MASK;
+       ret = regmap_update_bits(bdpsy->chip.regmap,
+                                BD70528_REG_INT_MAIN_MASK, mask, 0);
+       if (ret)
+               dev_err(&pdev->dev, "Failed to enable charger IRQs\n");
+
+       return ret;
+}
+
+static int bd70528_get_charger_status(struct bd70528_psy *bdpsy, int *val)
+{
+       int ret;
+       unsigned int v;
+
+       ret = regmap_read(bdpsy->chip.regmap, BD70528_REG_CHG_CURR_STAT, &v);
+       if (ret) {
+               dev_err(bdpsy->chip.dev, "Charger state read failure %d\n",
+                       ret);
+               return ret;
+       }
+
+       switch (v & BD70528_MASK_CHG_STAT) {
+       case CHG_STAT_SUSPEND:
+       /* Maybe we should check the CHG_TTRI_EN? */
+       case CHG_STAT_OTP_TRICKLE:
+       case CHG_STAT_OTP_FAST:
+       case CHG_STAT_OTP_DONE:
+       case CHG_STAT_TSD_TRICKLE:
+       case CHG_STAT_TSD_FAST:
+       case CHG_STAT_TSD_TOPOFF:
+       case CHG_STAT_BAT_ERR:
+               *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+               break;
+       case CHG_STAT_DONE:
+               *val = POWER_SUPPLY_STATUS_FULL;
+               break;
+       case CHG_STAT_TRICKLE:
+       case CHG_STAT_FAST:
+       case CHG_STAT_TOPOFF:
+               *val = POWER_SUPPLY_STATUS_CHARGING;
+               break;
+       default:
+               *val = POWER_SUPPLY_STATUS_UNKNOWN;
+               break;
+       }
+
+       return 0;
+}
+
+static int bd70528_get_charge_type(struct bd70528_psy *bdpsy, int *val)
+{
+       int ret;
+       unsigned int v;
+
+       ret = regmap_read(bdpsy->chip.regmap, BD70528_REG_CHG_CURR_STAT, &v);
+       if (ret) {
+               dev_err(bdpsy->chip.dev, "Charger state read failure %d\n",
+                       ret);
+               return ret;
+       }
+
+       switch (v & BD70528_MASK_CHG_STAT) {
+       case CHG_STAT_TRICKLE:
+               *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+               break;
+       case CHG_STAT_FAST:
+       case CHG_STAT_TOPOFF:
+               *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+               break;
+       case CHG_STAT_DONE:
+       case CHG_STAT_SUSPEND:
+       /* Maybe we should check the CHG_TTRI_EN? */
+       case CHG_STAT_OTP_TRICKLE:
+       case CHG_STAT_OTP_FAST:
+       case CHG_STAT_OTP_DONE:
+       case CHG_STAT_TSD_TRICKLE:
+       case CHG_STAT_TSD_FAST:
+       case CHG_STAT_TSD_TOPOFF:
+       case CHG_STAT_BAT_ERR:
+               *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+               break;
+       default:
+               *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+               break;
+       }
+
+       return 0;
+}
+
+static int bd70528_get_battery_health(struct bd70528_psy *bdpsy, int *val)
+{
+       int ret;
+       unsigned int v;
+
+       ret = regmap_read(bdpsy->chip.regmap, BD70528_REG_CHG_BAT_STAT, &v);
+       if (ret) {
+               dev_err(bdpsy->chip.dev, "Battery state read failure %d\n",
+                       ret);
+               return ret;
+       }
+       /* No battery? */
+       if (!(v & BD70528_MASK_CHG_BAT_DETECT))
+               *val = POWER_SUPPLY_HEALTH_DEAD;
+       else if (v & BD70528_MASK_CHG_BAT_OVERVOLT)
+               *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+       else if (v & BD70528_MASK_CHG_BAT_TIMER)
+               *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+       else
+               *val = POWER_SUPPLY_HEALTH_GOOD;
+
+       return 0;
+}
+
+static int bd70528_get_online(struct bd70528_psy *bdpsy, int *val)
+{
+       int ret;
+       unsigned int v;
+
+       ret = regmap_read(bdpsy->chip.regmap, BD70528_REG_CHG_IN_STAT, &v);
+       if (ret) {
+               dev_err(bdpsy->chip.dev, "DC1 IN state read failure %d\n",
+                       ret);
+               return ret;
+       }
+
+       *val = (v & BD70528_MASK_CHG_DCIN1_UVLO) ? 1 : 0;
+
+       return 0;
+}
+
+static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
+{
+       int ret;
+       unsigned int v;
+
+       ret = regmap_read(bdpsy->chip.regmap, BD70528_REG_CHG_BAT_STAT, &v);
+       if (ret) {
+               dev_err(bdpsy->chip.dev, "Battery state read failure %d\n",
+                       ret);
+               return ret;
+       }
+
+       *val = (v & BD70528_MASK_CHG_BAT_DETECT) ? 1 : 0;
+
+       return 0;
+}
+
+struct linear_range {
+       int min;
+       int step;
+       int vals;
+       int low_sel;
+};
+
+struct linear_range current_limit_ranges[] = {
+       {
+               .min = 5,
+               .step = 1,
+               .vals = 36,
+               .low_sel = 0,
+       },
+       {
+               .min = 40,
+               .step = 5,
+               .vals = 5,
+               .low_sel = 0x23,
+       },
+       {
+               .min = 60,
+               .step = 20,
+               .vals = 8,
+               .low_sel = 0x27,
+       },
+       {
+               .min = 200,
+               .step = 50,
+               .vals = 7,
+               .low_sel = 0x2e,
+       }
+};
+
+/*
+ * BD70528 would support setting and getting own charge current/
+ * voltage for low temperatures. The driver currently only reads
+ * the charge current at room temperature. We do set both though.
+ */
+struct linear_range warm_charge_curr[] = {
+       {
+               .min = 10,
+               .step = 10,
+               .vals = 20,
+               .low_sel = 0,
+       },
+       {
+               .min = 200,
+               .step = 25,
+               .vals = 13,
+               .low_sel = 0x13,
+       },
+};
+
+/*
+ * Cold charge current selectors are identical to warm charge current
+ * selectors. The difference is that only smaller currents are available
+ * at cold charge range.
+ */
+#define MAX_COLD_CHG_CURR_SEL 0x15
+#define MAX_WARM_CHG_CURR_SEL 0x1f
+#define MIN_CHG_CURR_SEL 0x0
+
+static int find_value_for_selector_low(struct linear_range *r, int selectors,
+                                      unsigned int sel, unsigned int *val)
+{
+       int i;
+
+       for (i = 0; i < selectors; i++) {
+               if (r[i].low_sel <= sel && r[i].low_sel + r[i].vals >= sel) {
+                       *val = r[i].min + (sel - r[i].low_sel) * r[i].step;
+                       return 0;
+               }
+
+       }
+       return -EINVAL;
+}
+
+/*
+ * For BD70528 voltage/current limits we happily accept any value which
+ * belongs the range. We could check if value matching the selector is
+ * desired by computing the range min + (sel - sel_low) * range step - but
+ * I guess it is enough if we use voltage/current which is closest (below)
+ * the requested?
+ */
+static int find_selector_for_value_low(struct linear_range *r, int selectors,
+                                      unsigned int val, unsigned int *sel,
+                                      bool *found)
+{
+       int i;
+       int ret = -EINVAL;
+
+       *found = false;
+       for (i = 0; i < selectors; i++) {
+               if (r[i].min <= val) {
+                       if (r[i].min + r[i].step * r[i].vals >= val) {
+                               *found = true;
+                               *sel = r[i].low_sel + (val - r[i].min) /
+                                      r[i].step;
+                               ret = 0;
+                               break;
+                       }
+                       /*
+                        * If the range max is smaller than requested
+                        * we can set the max supported value from range
+                        */
+                       *sel = r[i].low_sel + r[i].vals;
+                       ret = 0;
+               }
+       }
+       return ret;
+}
+
+static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
+{
+       unsigned int sel;
+       int ret;
+
+       ret = regmap_read(bdpsy->chip.regmap, BD70528_REG_CHG_CHG_CURR_WARM,
+                         &sel);
+       if (ret) {
+               dev_err(bdpsy->chip.dev,
+                       "Charge current reading failed (%d)\n", ret);
+               return ret;
+       }
+
+       sel &= BD70528_MASK_CHG_CHG_CURR;
+
+       ret = find_value_for_selector_low(&warm_charge_curr[0],
+                                         ARRAY_SIZE(warm_charge_curr), sel,
+                                         ma);
+       if (ret) {
+               dev_err(bdpsy->chip.dev,
+                       "Unknown charge current value 0x%x\n",
+                       sel);
+       }
+
+       return ret;
+}
+
+static int get_current_limit(struct bd70528_psy *bdpsy, int *ma)
+{
+       unsigned int sel;
+       int ret;
+
+       ret = regmap_read(bdpsy->chip.regmap, BD70528_REG_CHG_DCIN_ILIM,
+                         &sel);
+
+       if (ret) {
+               dev_err(bdpsy->chip.dev,
+                       "Input current limit reading failed (%d)\n", ret);
+               return ret;
+       }
+
+       sel &= BD70528_MASK_CHG_DCIN_ILIM;
+
+       ret = find_value_for_selector_low(&current_limit_ranges[0],
+                                         ARRAY_SIZE(current_limit_ranges), sel,
+                                         ma);
+
+       if (ret) {
+               /* Unspecified values mean 500 mA */
+               *ma = 500;
+       }
+       return 0;
+}
+
+static enum power_supply_property bd70528_charger_props[] = {
+       POWER_SUPPLY_PROP_STATUS,
+       POWER_SUPPLY_PROP_CHARGE_TYPE,
+       POWER_SUPPLY_PROP_HEALTH,
+       POWER_SUPPLY_PROP_PRESENT,
+       POWER_SUPPLY_PROP_ONLINE,
+       POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+       POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+       POWER_SUPPLY_PROP_MODEL_NAME,
+       POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int bd70528_charger_get_property(struct power_supply *psy,
+                                       enum power_supply_property psp,
+                                       union power_supply_propval *val)
+{
+       struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
+       int ret = 0;
+
+       switch (psp) {
+       case POWER_SUPPLY_PROP_STATUS:
+               return bd70528_get_charger_status(bdpsy, &val->intval);
+       case POWER_SUPPLY_PROP_CHARGE_TYPE:
+               return bd70528_get_charge_type(bdpsy, &val->intval);
+       case POWER_SUPPLY_PROP_HEALTH:
+               return bd70528_get_battery_health(bdpsy, &val->intval);
+       case POWER_SUPPLY_PROP_PRESENT:
+               return bd70528_get_present(bdpsy, &val->intval);
+       case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+               ret = get_current_limit(bdpsy, &val->intval);
+               val->intval *= 1000;
+               return ret;
+       case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+               ret = get_charge_current(bdpsy, &val->intval);
+               val->intval *= 1000;
+               return ret;
+       case POWER_SUPPLY_PROP_ONLINE:
+               return bd70528_get_online(bdpsy, &val->intval);
+       case POWER_SUPPLY_PROP_MODEL_NAME:
+               val->strval = bd70528_charger_model;
+               return 0;
+       case POWER_SUPPLY_PROP_MANUFACTURER:
+               val->strval = bd70528_charger_manufacturer;
+               return 0;
+       default:
+               break;
+       }
+
+       return -EINVAL;
+}
+
+static int bd70528_prop_is_writable(struct power_supply *psy,
+                                   enum power_supply_property psp)
+{
+       switch (psp) {
+       case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+       case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+               return 1;
+       default:
+               break;
+       }
+       return 0;
+}
+
+
+
+static int set_charge_current(struct bd70528_psy *bdpsy, int ma)
+{
+       unsigned int reg;
+       int ret = 0, tmpret;
+       bool found;
+
+       if (ma > 500) {
+               dev_warn(bdpsy->chip.dev,
+                        "Requested charge current %u exceed maximum (500mA)\n",
+                        ma);
+               reg = MAX_WARM_CHG_CURR_SEL;
+               goto set;
+       }
+       if (ma < 10) {
+               dev_err(bdpsy->chip.dev,
+                       "Requested charge current %u smaller than min (10mA)\n",
+                        ma);
+               reg = MIN_CHG_CURR_SEL;
+               ret = -EINVAL;
+               goto set;
+       }
+
+       ret = find_selector_for_value_low(&warm_charge_curr[0],
+                                         ARRAY_SIZE(warm_charge_curr), ma,
+                                         &reg, &found);
+
+       if (!found) {
+               /* There was a gap in supported values and we hit it */
+               dev_warn(bdpsy->chip.dev,
+                        "Unsupported charge current %u mA\n", ma);
+       }
+set:
+
+       tmpret = regmap_update_bits(bdpsy->chip.regmap,
+                                   BD70528_REG_CHG_CHG_CURR_WARM,
+                                   BD70528_MASK_CHG_CHG_CURR, reg);
+       if (tmpret)
+               dev_err(bdpsy->chip.dev,
+                       "Charge current write failure (%d)\n", tmpret);
+
+       if (reg > MAX_COLD_CHG_CURR_SEL)
+               reg = MAX_COLD_CHG_CURR_SEL;
+
+       if (!tmpret)
+               tmpret = regmap_update_bits(bdpsy->chip.regmap,
+                                           BD70528_REG_CHG_CHG_CURR_COLD,
+                                           BD70528_MASK_CHG_CHG_CURR, reg);
+
+       if (!ret)
+               ret = tmpret;
+
+       return ret;
+}
+
+#define MAX_CURR_LIMIT_SEL 0x34
+#define MIN_CURR_LIMIT_SEL 0x0
+
+static int set_current_limit(struct bd70528_psy *bdpsy, int ma)
+{
+       unsigned int reg;
+       int ret = 0, tmpret;
+       bool found;
+
+       if (ma > 500) {
+               dev_warn(bdpsy->chip.dev,
+                        "Requested current limit %u exceed maximum (500mA)\n",
+                        ma);
+               reg = MAX_CURR_LIMIT_SEL;
+               goto set;
+       }
+       if (ma < 5) {
+               dev_err(bdpsy->chip.dev,
+                       "Requested current limit %u smaller than min (5mA)\n",
+                       ma);
+               reg = MIN_CURR_LIMIT_SEL;
+               ret = -EINVAL;
+               goto set;
+       }
+
+       ret = find_selector_for_value_low(&current_limit_ranges[0],
+                                         ARRAY_SIZE(current_limit_ranges), ma,
+                                         &reg, &found);
+       if (!found) {
+               /* There was a gap in supported values and we hit it ?*/
+               dev_warn(bdpsy->chip.dev, "Unsupported current limit %umA\n",
+                        ma);
+       }
+
+set:
+       tmpret = regmap_update_bits(bdpsy->chip.regmap,
+                                   BD70528_REG_CHG_DCIN_ILIM,
+                                   BD70528_MASK_CHG_DCIN_ILIM, reg);
+
+       if (!ret)
+               ret = tmpret;
+
+       return ret;
+}
+
+static int bd70528_charger_set_property(struct power_supply *psy,
+                                       enum power_supply_property psp,
+                                       const union power_supply_propval *val)
+{
+       struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
+
+       switch (psp) {
+       case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+               return set_current_limit(bdpsy, val->intval / 1000);
+       case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+               return set_charge_current(bdpsy, val->intval / 1000);
+       default:
+               break;
+       }
+       return -EINVAL;
+}
+
+static const struct power_supply_desc bd70528_charger_desc = {
+       .name           = "bd70528-charger",
+       .type           = POWER_SUPPLY_TYPE_BATTERY,
+       .properties     = bd70528_charger_props,
+       .num_properties = ARRAY_SIZE(bd70528_charger_props),
+       .get_property   = bd70528_charger_get_property,
+       .set_property   = bd70528_charger_set_property,
+       .property_is_writeable  = bd70528_prop_is_writable,
+};
+
+static int bd70528_power_probe(struct platform_device *pdev)
+{
+       struct rohm_regmap_dev *mfd;
+       struct bd70528_psy *bdpsy;
+       struct power_supply_config cfg = {};
+
+       mfd = dev_get_drvdata(pdev->dev.parent);
+       if (!mfd) {
+               dev_err(&pdev->dev, "No MFD driver data\n");
+               return -EINVAL;
+       }
+       bdpsy = devm_kzalloc(&pdev->dev, sizeof(*bdpsy), GFP_KERNEL);
+       if (!bdpsy)
+               return -ENOMEM;
+       bdpsy->chip = *mfd;
+       bdpsy->chip.dev = &pdev->dev;
+
+       platform_set_drvdata(pdev, bdpsy);
+       cfg.drv_data = bdpsy;
+       cfg.of_node = pdev->dev.parent->of_node;
+
+       bdpsy->psy = devm_power_supply_register(&pdev->dev,
+                                               &bd70528_charger_desc, &cfg);
+       if (IS_ERR(bdpsy->psy)) {
+               dev_err(&pdev->dev, "failed: power supply register\n");
+               return PTR_ERR(bdpsy->psy);
+       }
+
+       return bd70528_get_irqs(pdev, bdpsy);
+}
+
+static struct platform_driver bd70528_power = {
+       .driver = {
+               .name = "bd70528-power"
+       },
+       .probe = bd70528_power_probe,
+};
+
+module_platform_driver(bd70528_power);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD70528 power-supply driver");
+MODULE_LICENSE("GPL");
-- 
2.14.3


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~

Reply via email to