From: Muhammad Husaini Zulkifli
Keem Bay SOC can support dual voltage operations for GPIO SD Pins to
either 1.8V or 3.3V for bus IO line power. In order to operate the GPIOs
line for Clk,Cmd and Data on Keem Bay Hardware, it is important to
configure the supplied voltage applied to their I/O Rail
On Thu, Dec 3, 2020 at 8:10 AM Zulkifli, Muhammad Husaini
wrote:
> >Yeah it has to be called from somewhere, if you want an abstraction to make
> >the driver neutral to any machine, then use a selector regulator. It can be
> >placed anywhere in the kernel as long as you can reference it.
>
> Sorr
Hi Muhammad,
thanks for your patch!
On Wed, Dec 2, 2020 at 8:04 AM wrote:
> Keem Bay SOC can support dual voltage operations for GPIO SD Pins to
> either 1.8V or 3.3V for bus IO line power. In order to operate the GPIOs
> line for Clk,Cmd and Data on Keem Bay Hardware, it is important to
> conf
ad.org>; linux-kernel@vger.kernel.org; Shevchenko,
>Andriy ; Raja Subramanian, Lakshmi Bai
>; Wan Mohamad, Wan Ahmad
>Zainie ; Mark Gross
>
>Subject: Re: [PATCH v6 4/4] mmc: sdhci-of-arasan: Enable UHS-1 support for
>Keem Bay SOC
>
>Hi Muhammad,
>
>thanks for your patch
On Thu, Dec 03, 2020 at 09:10:14AM +0200, Zulkifli, Muhammad Husaini wrote:
> >From: Linus Walleij
> >Sent: Thursday, December 3, 2020 2:55 AM
> >On Wed, Dec 2, 2020 at 8:04 AM
> >wrote:
...
> >If it should use any abstraction it should be a selector regulator IMO and
> >while that may seem ove
evchenko,
>Andriy ; Raja Subramanian, Lakshmi Bai
>; Wan Mohamad, Wan Ahmad
>Zainie ; Mark Gross
>
>Subject: Re: [PATCH v6 4/4] mmc: sdhci-of-arasan: Enable UHS-1 support for
>Keem Bay SOC
>
>On Thu, Dec 3, 2020 at 8:10 AM Zulkifli, Muhammad Husaini
> wrote:
>
>&
6 matches
Mail list logo
