Switch the uart_ao pclk to CLK81 since the clock driver is ready.
Also move the clock info to the board.dts instead in the soc.dtsi.
Signed-off-by: Yixun Lan <yixun....@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +----
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 70eca1f8736a..718bbebff107 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -19,4 +19,6 @@
&uart_AO {
status = "okay";
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 6fe5ee0c144e..f5b496bfd4de 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
/ {
compatible = "amlogic,meson-axg";
@@ -200,8 +201,6 @@
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
@@ -209,8 +208,6 @@
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
};
--
2.15.1
