Hi Andrew,
Please, consider pulling out the patch that sits currently in linux-mm and
put this one instead.
I would still like to hear Michal's opinion but it should be safe
enough to let it sit in the mmotm/linux-next for a while.
Thanks
Changes from v8 -> v9:
- Change order of kasan calls and offline_mem_sections
- Collect Reviewed-by
Changes from v7 -> v8:
- Addressed feedback from David for patch#4
Changes from v6 -> v7:
- Fix check from "mm,memory_hotplug: Relax fully spanned sections check"
- Add fixup from "mm,memory_hotplug: Allocate memmap from the added memory
range"
- Add Reviewed-by from David for patch#2
- Fix changelog in "mm,memory_hotplug: Factor out adjusting present pages into
adjust_present_page_count()"
Changes from v5 -> v6:
- Create memory_block_{online,offline} functions
- Create vmemmap_* functions to deal with vmemmap stuff, so
{online,offline}_pages remain untouched
- Add adjust_present_page_count's patch from David
- Relax check in {offline,online}_pages
- Rework changelogs
Changes from v4 -> v5:
- Addressed feedback from David (patch#1)
- Tested on x86_64 with different struct page sizes and on large/small memory
blocks
- Tested on arm64 with 4K, 64K (with and without THP) and with different struct
page sizes
NOTE: We might need to make this feature and hugetlb-vmemmap feature [1]
mutually
exclusive. I raised an issue I see in [2].
Hugetlb-vmemmap feature has been withdrawn for the time being due to the
need
in further changes wrt. locking/freeing context.
I will keep an eye, and when the time comes again I will see how the two
features play together and how one another can be disabled when needed.
Changes from v3 -> v4:
- Addressed feedback from David
- Wrap memmap_on_memory module thingy with #ifdef
on MHP_MEMMAP_ON_MEMORY
- Move "depend on MEMORY_HOTPLUG" to MHP_MEMMAP_ON_MEMORY
in generic mm/Kconfig
- Collect David's Reviewed-bys
Changes from v2 -> v3:
- Addressed feedback from David
- Squash former patch#4 and and patch#5 into patch#1
- Fix config dependency CONFIR_SPARSE_VMEMMAP vs CONFIG_SPARSE_VMEMMAP_ENABLE
- Simplify module parameter functions
Changes from v1 -> v2
- Addressed feedback from David
- Fence off the feature in case struct page size is not
multiple of PMD size or pageblock alignment cannot be guaranted
- Tested on x86_64 small and large memory_blocks
- Tested on arm64 4KB and 64KB page sizes (for some reason I cannot boot
my VM with 16KB page size).
Arm64 with 4KB page size behaves like x86_64 after [1], which made section
size smaller.
With 64KB, the feature gets fenced off due to pageblock alignment.
Changes from RFCv3 -> v1:
- Addressed feedback from David
- Re-order patches
Changes from v2 -> v3 (RFC):
- Re-order patches (Michal)
- Fold "mm,memory_hotplug: Introduce MHP_MEMMAP_ON_MEMORY" in patch#1
- Add kernel boot option to enable this feature (Michal)
Changes from v1 -> v2 (RFC):
- Addressed feedback provided by David
- Add a arch_support_memmap_on_memory to be called
from mhp_supports_memmap_on_memory, as atm,
only ARM, powerpc and x86_64 have altmat support.
[1] https://lore.kernel.org/lkml/cover.1611206601.git.sudaraj...
Original cover letter:
The primary goal of this patchset is to reduce memory overhead of the
hot-added memory (at least for SPARSEMEM_VMEMMAP memory model).
The current way we use to populate memmap (struct page array) has two main
drawbacks:
a) it consumes an additional memory until the hotadded memory itself is
onlined and
b) memmap might end up on a different numa node which is especially true
for movable_node configuration.
c) due to fragmentation we might end up populating memmap with base
pages
One way to mitigate all these issues is to simply allocate memmap array
(which is the largest memory footprint of the physical memory hotplug)
from the hot-added memory itself. SPARSEMEM_VMEMMAP memory model allows
us to map any pfn range so the memory doesn't need to be online to be
usable for the array. See patch 4 for more details.
This feature is only usable when CONFIG_SPARSEMEM_VMEMMAP is set.
[Overall design]:
Implementation wise we reuse vmem_altmap infrastructure to override
the default allocator used by vmemap_populate.
memory_block structure gains a new field called nr_vmemmap_pages,
which accounts for the number of vmemmap pages used by that memory_block.
E.g: On x86_64, that is 512 vmemmap pages on small memory bloks and 4096
on large memory blocks (1GB)
We also introduce new two functions: memory_block_{online,offline}.
These functions take care of initializing/unitializing vmemmap pages
prior to calling {online,offline}_pages, so the latter functions can
remain totally untouched.
More details can be found in the respective changelogs.
David Hildenbrand (1):
mm,memory_hotplug: Factor out adjusting present pages into
adjust_present_page_count()
Oscar Salvador (7):
drivers/base/memory: Introduce memory_block_{online,offline}
mm,memory_hotplug: Relax fully spanned sections check
mm,memory_hotplug: Allocate memmap from the added memory range
acpi,memhotplug: Enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: Add kernel boot option to enable memmap_on_memory
x86/Kconfig: Introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
arm64/Kconfig: Introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
Documentation/admin-guide/kernel-parameters.txt | 17 ++
arch/arm64/Kconfig | 3 +
arch/x86/Kconfig | 3 +
drivers/acpi/acpi_memhotplug.c | 5 +-
drivers/base/memory.c | 100 ++++++++++--
include/linux/memory.h | 8 +-
include/linux/memory_hotplug.h | 15 +-
include/linux/memremap.h | 2 +-
include/linux/mmzone.h | 7 +-
mm/Kconfig | 5 +
mm/Makefile | 5 +-
mm/memory_hotplug.c | 205 +++++++++++++++++++++---
mm/sparse.c | 2 -
13 files changed, 330 insertions(+), 47 deletions(-)
--
2.16.3
