[PATCH v9 14/16] dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers

[Sia Jee Heng]

Add support for Intel KeemBay AxiDMA BYTE and HALFWORD registers
programming.

Intel KeemBay AxiDMA supports data transfer between device to memory
and memory to device operations.

This code is needed by I2C, I3C, I2S, SPI and UART which uses FIFO
size of 8bits and 16bits to perform memory to device data transfer
operation. 0-padding functionality is provided to avoid
pre-processing of data on CPU.

Reviewed-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
Signed-off-by: Sia Jee Heng <jee.heng....@intel.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c 
b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index e19369f9365a..ea527b92e0fc 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -307,6 +307,30 @@ static void write_chan_llp(struct axi_dma_chan *chan, 
dma_addr_t adr)
        axi_chan_iowrite64(chan, CH_LLP, adr);
 }
 
+static void dw_axi_dma_set_byte_halfword(struct axi_dma_chan *chan, bool set)
+{
+       u32 reg_width, offset, val;
+
+       if (!chan->chip->apb_regs) {
+               dev_dbg(chan->chip->dev, "apb_regs not initialized\n");
+               return;
+       }
+
+       reg_width = __ffs(chan->config.dst_addr_width);
+       if (reg_width == DWAXIDMAC_TRANS_WIDTH_8)
+               offset = DMAC_APB_BYTE_WR_CH_EN;
+       else if (reg_width == DWAXIDMAC_TRANS_WIDTH_16)
+               offset = DMAC_APB_HALFWORD_WR_CH_EN;
+
+       val = ioread32(chan->chip->apb_regs + offset);
+
+       if (set)
+               val |= BIT(chan->id);
+       else
+               val &= ~BIT(chan->id);
+
+       iowrite32(val, chan->chip->apb_regs + offset);
+}
 /* Called in chan locked context */
 static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
                                      struct axi_dma_desc *first)
@@ -334,6 +358,7 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan 
*chan,
               DWAXIDMAC_HS_SEL_HW << CH_CFG_H_HS_SEL_SRC_POS);
        switch (chan->direction) {
        case DMA_MEM_TO_DEV:
+               dw_axi_dma_set_byte_halfword(chan, true);
                reg |= (chan->config.device_fc ?
                        DWAXIDMAC_TT_FC_MEM_TO_PER_DST :
                        DWAXIDMAC_TT_FC_MEM_TO_PER_DMAC)
@@ -1008,6 +1033,8 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
        if (chan->direction != DMA_MEM_TO_MEM)
                dw_axi_dma_set_hw_channel(chan->chip,
                                          chan->hw_handshake_num, false);
+       if (chan->direction == DMA_MEM_TO_DEV)
+               dw_axi_dma_set_byte_halfword(chan, false);
 
        spin_lock_irqsave(&chan->vc.lock, flags);
 
-- 
2.18.0