On 10/24/2017 12:41 AM, John Stultz wrote:
> On Mon, Oct 23, 2017 at 2:19 AM, Minas Harutyunyan
> wrote:
>> Could you please verify on your setup follow patches:
>> 1. Vardan's patch.
>> 2. Patch for TOUTCAL programming (new version see below).
>> 4. Your patch 2/3
On 10/24/2017 12:41 AM, John Stultz wrote:
> On Mon, Oct 23, 2017 at 2:19 AM, Minas Harutyunyan
> wrote:
>> Could you please verify on your setup follow patches:
>> 1. Vardan's patch.
>> 2. Patch for TOUTCAL programming (new version see below).
>> 4. Your patch 2/3 to avoid "Mode Mismatch"
On Mon, Oct 23, 2017 at 1:41 PM, John Stultz wrote:
> On Mon, Oct 23, 2017 at 2:19 AM, Minas Harutyunyan
> wrote:
>> Could you please verify on your setup follow patches:
>> 1. Vardan's patch.
>> 2. Patch for TOUTCAL programming (new
On Mon, Oct 23, 2017 at 1:41 PM, John Stultz wrote:
> On Mon, Oct 23, 2017 at 2:19 AM, Minas Harutyunyan
> wrote:
>> Could you please verify on your setup follow patches:
>> 1. Vardan's patch.
>> 2. Patch for TOUTCAL programming (new version see below).
>> 4. Your patch 2/3 to avoid "Mode
On Mon, Oct 23, 2017 at 2:19 AM, Minas Harutyunyan
wrote:
> Could you please verify on your setup follow patches:
> 1. Vardan's patch.
> 2. Patch for TOUTCAL programming (new version see below).
> 4. Your patch 2/3 to avoid "Mode Mismatch" interrupts.
> 5. Your
On Mon, Oct 23, 2017 at 2:19 AM, Minas Harutyunyan
wrote:
> Could you please verify on your setup follow patches:
> 1. Vardan's patch.
> 2. Patch for TOUTCAL programming (new version see below).
> 4. Your patch 2/3 to avoid "Mode Mismatch" interrupts.
> 5. Your patch 3/3 to set udc state to "not
On 10/20/2017 3:57 PM, Minas Harutyunyan wrote:
> On 10/20/2017 12:20 AM, John Stultz wrote:
>> On Wed, Oct 18, 2017 at 11:46 PM, Minas Harutyunyan
>> wrote:
>>> Could you please apply this patch. Please not apply your patch series
>>> "[PATCH 0/3] dwc2 fixes for
On 10/20/2017 3:57 PM, Minas Harutyunyan wrote:
> On 10/20/2017 12:20 AM, John Stultz wrote:
>> On Wed, Oct 18, 2017 at 11:46 PM, Minas Harutyunyan
>> wrote:
>>> Could you please apply this patch. Please not apply your patch series
>>> "[PATCH 0/3] dwc2 fixes for edge cases on hikey" to check
On 10/20/2017 12:20 AM, John Stultz wrote:
> On Wed, Oct 18, 2017 at 11:46 PM, Minas Harutyunyan
> wrote:
>> Could you please apply this patch. Please not apply your patch series
>> "[PATCH 0/3] dwc2 fixes for edge cases on hikey" to check only below patch.
>> If
On 10/20/2017 12:20 AM, John Stultz wrote:
> On Wed, Oct 18, 2017 at 11:46 PM, Minas Harutyunyan
> wrote:
>> Could you please apply this patch. Please not apply your patch series
>> "[PATCH 0/3] dwc2 fixes for edge cases on hikey" to check only below patch.
>> If you confirm that this patch fix
Hi John Stultz,
On 10/20/2017 12:06 AM, John Stultz wrote:
> On Tue, Oct 17, 2017 at 1:41 AM, Minas Harutyunyan
> wrote:
>> On 10/17/2017 1:34 AM, John Stultz wrote:
>>> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
>>>
Hi John Stultz,
On 10/20/2017 12:06 AM, John Stultz wrote:
> On Tue, Oct 17, 2017 at 1:41 AM, Minas Harutyunyan
> wrote:
>> On 10/17/2017 1:34 AM, John Stultz wrote:
>>> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
>>> wrote:
On b-plug disconnect should asserted GOTGINT.SesEndDet
On Wed, Oct 18, 2017 at 11:46 PM, Minas Harutyunyan
wrote:
> Could you please apply this patch. Please not apply your patch series
> "[PATCH 0/3] dwc2 fixes for edge cases on hikey" to check only below patch.
> If you confirm that this patch fix your issue with
On Wed, Oct 18, 2017 at 11:46 PM, Minas Harutyunyan
wrote:
> Could you please apply this patch. Please not apply your patch series
> "[PATCH 0/3] dwc2 fixes for edge cases on hikey" to check only below patch.
> If you confirm that this patch fix your issue with "Transaction Error"
> and " ChHltd
On Tue, Oct 17, 2017 at 1:41 AM, Minas Harutyunyan
wrote:
> On 10/17/2017 1:34 AM, John Stultz wrote:
>> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
>> wrote:
>>> On b-plug disconnect should asserted GOTGINT.SesEndDet
On Tue, Oct 17, 2017 at 1:41 AM, Minas Harutyunyan
wrote:
> On 10/17/2017 1:34 AM, John Stultz wrote:
>> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
>> wrote:
>>> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
>>> According previously sent by you register dump (GHWCFG2
On 10/17/2017 12:41 PM, Minas Harutyunyan wrote:
> On 10/17/2017 1:34 AM, John Stultz wrote:
>> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
>> wrote:
>>> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
>>> According previously sent by you
On 10/17/2017 12:41 PM, Minas Harutyunyan wrote:
> On 10/17/2017 1:34 AM, John Stultz wrote:
>> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
>> wrote:
>>> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
>>> According previously sent by you register dump (GHWCFG2 =
On 10/17/2017 1:34 AM, John Stultz wrote:
> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
> wrote:
>> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
>> According previously sent by you register dump (GHWCFG2 = 0x23affc70)
>> your core
On 10/17/2017 1:34 AM, John Stultz wrote:
> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
> wrote:
>> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
>> According previously sent by you register dump (GHWCFG2 = 0x23affc70)
>> your core OTG_MODE=0.
>> Bellow fragment from
On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
wrote:
> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
> According previously sent by you register dump (GHWCFG2 = 0x23affc70)
> your core OTG_MODE=0.
> Bellow fragment from programming guide on
On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
wrote:
> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
> According previously sent by you register dump (GHWCFG2 = 0x23affc70)
> your core OTG_MODE=0.
> Bellow fragment from programming guide on Device disconnect:
>
>
On 10/12/2017 10:06 PM, John Stultz wrote:
> On Thu, Oct 12, 2017 at 12:59 AM, Minas Harutyunyan
> wrote:
>>
>> 1. Vardan's patch fixing issue when dwc2 switched from host to device
>> mode. It's allow to make functional device after reconnecting without
>>
On 10/12/2017 10:06 PM, John Stultz wrote:
> On Thu, Oct 12, 2017 at 12:59 AM, Minas Harutyunyan
> wrote:
>>
>> 1. Vardan's patch fixing issue when dwc2 switched from host to device
>> mode. It's allow to make functional device after reconnecting without
>> tracking UDC state.
>
> While I'm sure
On Thu, Oct 12, 2017 at 12:59 AM, Minas Harutyunyan
wrote:
>
> 1. Vardan's patch fixing issue when dwc2 switched from host to device
> mode. It's allow to make functional device after reconnecting without
> tracking UDC state.
While I'm sure Vardan's patch is
On Thu, Oct 12, 2017 at 12:59 AM, Minas Harutyunyan
wrote:
>
> 1. Vardan's patch fixing issue when dwc2 switched from host to device
> mode. It's allow to make functional device after reconnecting without
> tracking UDC state.
While I'm sure Vardan's patch is useful, I worry that its resolving a
On 10/10/2017 1:50 AM, John Stultz wrote:
> On Tue, Oct 3, 2017 at 2:58 AM, Minas Harutyunyan
> wrote:
>>
>> Could you please apply patch from Vardan Mikayelyan "usb: dwc2: Fix
>> dwc2_hsotg_core_init_disconnected()" submitted at 02/25/2017
>>
On 10/10/2017 1:50 AM, John Stultz wrote:
> On Tue, Oct 3, 2017 at 2:58 AM, Minas Harutyunyan
> wrote:
>>
>> Could you please apply patch from Vardan Mikayelyan "usb: dwc2: Fix
>> dwc2_hsotg_core_init_disconnected()" submitted at 02/25/2017
>>
On Tue, Oct 3, 2017 at 2:58 AM, Minas Harutyunyan
wrote:
>
> Could you please apply patch from Vardan Mikayelyan "usb: dwc2: Fix
> dwc2_hsotg_core_init_disconnected()" submitted at 02/25/2017
> (https://marc.info/?l=linux-usb=148801589931039=2) instead of your
>
On Tue, Oct 3, 2017 at 2:58 AM, Minas Harutyunyan
wrote:
>
> Could you please apply patch from Vardan Mikayelyan "usb: dwc2: Fix
> dwc2_hsotg_core_init_disconnected()" submitted at 02/25/2017
> (https://marc.info/?l=linux-usb=148801589931039=2) instead of your
> "usb: dwc2: Improve gadget state
On 9/30/2017 9:13 PM, John Youn wrote:
> On 09/20/2017 12:57 PM, John Stultz wrote:
>> So here are a few dwc2 fixes that I've been using with HiKey.
>> I'm not totally sure these are all ideal, but they avoid edge case
>> issues that we have been running into with switching between
>> gadget mode
On 9/30/2017 9:13 PM, John Youn wrote:
> On 09/20/2017 12:57 PM, John Stultz wrote:
>> So here are a few dwc2 fixes that I've been using with HiKey.
>> I'm not totally sure these are all ideal, but they avoid edge case
>> issues that we have been running into with switching between
>> gadget mode
On 09/20/2017 12:57 PM, John Stultz wrote:
> So here are a few dwc2 fixes that I've been using with HiKey.
> I'm not totally sure these are all ideal, but they avoid edge case
> issues that we have been running into with switching between
> gadget mode and host mode.
>
> I'd guess the first two
On 09/20/2017 12:57 PM, John Stultz wrote:
> So here are a few dwc2 fixes that I've been using with HiKey.
> I'm not totally sure these are all ideal, but they avoid edge case
> issues that we have been running into with switching between
> gadget mode and host mode.
>
> I'd guess the first two
So here are a few dwc2 fixes that I've been using with HiKey.
I'm not totally sure these are all ideal, but they avoid edge case
issues that we have been running into with switching between
gadget mode and host mode.
I'd guess the first two are potentially -stable material, and
the last might be
So here are a few dwc2 fixes that I've been using with HiKey.
I'm not totally sure these are all ideal, but they avoid edge case
issues that we have been running into with switching between
gadget mode and host mode.
I'd guess the first two are potentially -stable material, and
the last might be
36 matches
Mail list logo