-stable review patch. If anyone has any objections, please let us know.
------------------
From: Stephen Hemminger <[EMAIL PROTECTED]>
This adds working recovery from transmit timeouts. Previous code
didn't do enough to truly reset chip.
It is a backport of the 2.6.21 code.
Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/net/sky2.c | 81 +++++++++++++++++++++++++++++++++++------------------
drivers/net/sky2.h | 1
2 files changed, 56 insertions(+), 26 deletions(-)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1802,38 +1802,22 @@ static void sky2_tx_timeout(struct net_d
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
- unsigned txq = txqaddr[sky2->port];
- u16 report, done;
+ unsigned port = sky2->port;
if (netif_msg_timer(sky2))
printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
- report = sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX :
STAT_TXA2_RIDX);
- done = sky2_read16(hw, Q_ADDR(txq, Q_DONE));
-
- printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
- dev->name,
- sky2->tx_cons, sky2->tx_prod, report, done);
-
- if (report != done) {
- printk(KERN_INFO PFX "status burst pending (irq
moderation?)\n");
+ /* Get information for bug report :-) */
+ printk(KERN_INFO PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
+ dev->name, sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
- } else if (report != sky2->tx_cons) {
- printk(KERN_INFO PFX "status report lost?\n");
- sky2_tx_complete(sky2, report);
- } else {
- printk(KERN_INFO PFX "hardware hung? flushing\n");
+ printk(KERN_INFO PFX "gmac control %#x status %#x\n",
+ gma_read16(hw, port, GM_GP_CTRL), gma_read16(hw, port,
GM_GP_STAT));
- sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP);
- sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL),
PREF_UNIT_RST_SET);
-
- sky2_tx_complete(sky2, sky2->tx_prod);
-
- sky2_qset(hw, txq);
- sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1);
- }
+ /* can't restart safely under softirq */
+ schedule_work(&hw->restart_work);
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -2565,6 +2549,49 @@ static int sky2_reset(struct sky2_hw *hw
return 0;
}
+static void sky2_restart(struct work_struct *work)
+{
+ struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
+ struct net_device *dev;
+ int i, err;
+
+ dev_dbg(&hw->pdev->dev, "restarting\n");
+
+ del_timer_sync(&hw->idle_timer);
+
+ rtnl_lock();
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
+
+ netif_poll_disable(hw->dev[0]);
+
+ for (i = 0; i < hw->ports; i++) {
+ dev = hw->dev[i];
+ if (netif_running(dev))
+ sky2_down(dev);
+ }
+
+ sky2_reset(hw);
+ sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
+ netif_poll_enable(hw->dev[0]);
+
+ for (i = 0; i < hw->ports; i++) {
+ dev = hw->dev[i];
+ if (netif_running(dev)) {
+ err = sky2_up(dev);
+ if (err) {
+ printk(KERN_INFO PFX "%s: could not restart
%d\n",
+ dev->name, err);
+ dev_close(dev);
+ }
+ }
+ }
+
+ sky2_idle_start(hw);
+
+ rtnl_unlock();
+}
+
static u32 sky2_supported_modes(const struct sky2_hw *hw)
{
if (sky2_is_copper(hw)) {
@@ -3508,6 +3535,8 @@ static int __devinit sky2_probe(struct p
}
setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+ INIT_WORK(&hw->restart_work, sky2_restart);
+
sky2_idle_start(hw);
pci_set_drvdata(pdev, hw);
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1898,6 +1898,7 @@ struct sky2_hw {
dma_addr_t st_dma;
struct timer_list idle_timer;
+ struct work_struct restart_work;
int msi;
wait_queue_head_t msi_wait;
};
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
