Use modules and define aliases for etho and eth1 in /etc/conf.modules.
If you need to have ethernet for rootfs, use ramdisks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
Use modules and define aliases for etho and eth1 in /etc/conf.modules.
If you need to have ethernet for rootfs, use ramdisks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
On Tue, Oct 17, 2000 at 08:51:08PM -0400, The Shadow's Hand wrote:
> I've got an Asus P2B-L mobo, which has an integrated eepro100, and an
> DEC Tulip PCI card. I've been running 2.2.16. To use a new ATA/100 card
> I tried 2.4-test10-pre3.
>
> All worked well, indeed very well, except 2.4
I've got an Asus P2B-L mobo, which has an integrated eepro100, and an
DEC Tulip PCI card. I've been running 2.2.16. To use a new ATA/100 card
I tried 2.4-test10-pre3.
All worked well, indeed very well, except 2.4 switched eth0 and eth1
from 2.2.x. That is, the Tulip became eth0, rather than
I've got an Asus P2B-L mobo, which has an integrated eepro100, and an
DEC Tulip PCI card. I've been running 2.2.16. To use a new ATA/100 card
I tried 2.4-test10-pre3.
All worked well, indeed very well, except 2.4 switched eth0 and eth1
from 2.2.x. That is, the Tulip became eth0, rather than
On Tue, Oct 17, 2000 at 08:51:08PM -0400, The Shadow's Hand wrote:
I've got an Asus P2B-L mobo, which has an integrated eepro100, and an
DEC Tulip PCI card. I've been running 2.2.16. To use a new ATA/100 card
I tried 2.4-test10-pre3.
All worked well, indeed very well, except 2.4 switched
6 matches
Mail list logo
