Len Brown wrote:
On Monday 12 March 2007 09:25, Luming Yu wrote:
try acpi=off please.
Ok, it boots up fine with acpi=off.
Now the next step is to try without the mm patch?
Helge Hafting
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message
Len Brown wrote:
On Monday 12 March 2007 09:25, Luming Yu wrote:
try acpi=off please.
Ok, it boots up fine with acpi=off.
Now the next step is to try without the mm patch?
Helge Hafting
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to
On Monday 12 March 2007 09:25, Luming Yu wrote:
> try acpi=off please.
>
> On 3/12/07, Helge Hafting <[EMAIL PROTECTED]> wrote:
> > I went from 2.6.18-rc5-mm1 to 2.6.21-rc3-mm2
> > The computer now hangs solid during boot, at this point:
> >
> > usb 1-1: configuration #1 chosen from 1 choice
> >
try acpi=off please.
On 3/12/07, Helge Hafting <[EMAIL PROTECTED]> wrote:
I went from 2.6.18-rc5-mm1 to 2.6.21-rc3-mm2
The computer now hangs solid during boot, at this point:
usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0
I went from 2.6.18-rc5-mm1 to 2.6.21-rc3-mm2
The computer now hangs solid during boot, at this point:
usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0
alt 0 proto 2 vid 0x04B8 pid 0x0007
usb 1-3: new high speed USB device
I went from 2.6.18-rc5-mm1 to 2.6.21-rc3-mm2
The computer now hangs solid during boot, at this point:
usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0
alt 0 proto 2 vid 0x04B8 pid 0x0007
usb 1-3: new high speed USB device
try acpi=off please.
On 3/12/07, Helge Hafting [EMAIL PROTECTED] wrote:
I went from 2.6.18-rc5-mm1 to 2.6.21-rc3-mm2
The computer now hangs solid during boot, at this point:
usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0
On Monday 12 March 2007 09:25, Luming Yu wrote:
try acpi=off please.
On 3/12/07, Helge Hafting [EMAIL PROTECTED] wrote:
I went from 2.6.18-rc5-mm1 to 2.6.21-rc3-mm2
The computer now hangs solid during boot, at this point:
usb 1-1: configuration #1 chosen from 1 choice
8 matches
Mail list logo