On Thu, 12 Oct 2000, Jeff Garzik wrote:
> "Richard B. Johnson" wrote:
> > --- linux-2.2.17/drivers/scsi/BusLogic.h.orig Thu Oct 12 11:22:44 2000
> > +++ linux-2.2.17/drivers/scsi/BusLogic.hThu Oct 12 11:47:07 2000
> > @@ -1509,6 +1509,7 @@
> > void
"Richard B. Johnson" wrote:
> --- linux-2.2.17/drivers/scsi/BusLogic.h.orig Thu Oct 12 11:22:44 2000
> +++ linux-2.2.17/drivers/scsi/BusLogic.hThu Oct 12 11:47:07 2000
> @@ -1509,6 +1509,7 @@
> void BusLogic_AcquireHostAdapterLock(BusLogic_HostAdapter_T *HostAdapter,
>
On Thu, 12 Oct 2000, Matthias Andree wrote:
> > Note that the sync-rate of target 6, the device I added, has been
> > turned down to try to eliminate any hardware problems. Also note
> > that the entire drive has been read/written with the BusLogic BIOS
> > diagnostic setup utility.
>
> That
> Note that the sync-rate of target 6, the device I added, has been
> turned down to try to eliminate any hardware problems. Also note
> that the entire drive has been read/written with the BusLogic BIOS
> diagnostic setup utility.
That BIOS setup tool might just use asynchronous I/O for
On Thu, 12 Oct 2000, Guest section DW wrote:
> On Wed, Oct 11, 2000 at 05:11:39PM -0400, Richard B. Johnson wrote:
>
> > Linux version 2.2.17
> > I tried to add a new Hard disk. It's s Seagate ST39102LW 8.1 Gb.
>
> Hmm. Your C/H/S multiplies out to 9.1 GB.
> On the other hand, Seagate
On Thu, 12 Oct 2000 00:24:51 +0200, Guest section DW blurted forth:
> On Wed, Oct 11, 2000 at 05:11:39PM -0400, Richard B. Johnson wrote:
>
> > In the BIOS setup of the BusLogic adapter, I was able to format
> > and verify the disk with no problems whatsoever.
> >
> > fdisk seemed to
On Thu, 12 Oct 2000 00:24:51 +0200, Guest section DW blurted forth:
On Wed, Oct 11, 2000 at 05:11:39PM -0400, Richard B. Johnson wrote:
In the BIOS setup of the BusLogic adapter, I was able to format
and verify the disk with no problems whatsoever.
fdisk seemed to work okay. I
On Thu, 12 Oct 2000, Guest section DW wrote:
On Wed, Oct 11, 2000 at 05:11:39PM -0400, Richard B. Johnson wrote:
Linux version 2.2.17
I tried to add a new Hard disk. It's s Seagate ST39102LW 8.1 Gb.
Hmm. Your C/H/S multiplies out to 9.1 GB.
On the other hand, Seagate ST39102LW has
Note that the sync-rate of target 6, the device I added, has been
turned down to try to eliminate any hardware problems. Also note
that the entire drive has been read/written with the BusLogic BIOS
diagnostic setup utility.
That BIOS setup tool might just use asynchronous I/O for anything,
On Thu, 12 Oct 2000, Matthias Andree wrote:
Note that the sync-rate of target 6, the device I added, has been
turned down to try to eliminate any hardware problems. Also note
that the entire drive has been read/written with the BusLogic BIOS
diagnostic setup utility.
That BIOS setup
"Richard B. Johnson" wrote:
--- linux-2.2.17/drivers/scsi/BusLogic.h.orig Thu Oct 12 11:22:44 2000
+++ linux-2.2.17/drivers/scsi/BusLogic.hThu Oct 12 11:47:07 2000
@@ -1509,6 +1509,7 @@
void BusLogic_AcquireHostAdapterLock(BusLogic_HostAdapter_T *HostAdapter,
On Thu, 12 Oct 2000, Jeff Garzik wrote:
"Richard B. Johnson" wrote:
--- linux-2.2.17/drivers/scsi/BusLogic.h.orig Thu Oct 12 11:22:44 2000
+++ linux-2.2.17/drivers/scsi/BusLogic.hThu Oct 12 11:47:07 2000
@@ -1509,6 +1509,7 @@
void
On Wed, Oct 11, 2000 at 05:11:39PM -0400, Richard B. Johnson wrote:
> Linux version 2.2.17
> I tried to add a new Hard disk. It's s Seagate ST39102LW 8.1 Gb.
Hmm. Your C/H/S multiplies out to 9.1 GB.
On the other hand, Seagate ST39102LW has 9105018880 bytes,
so probably the 8 was a typo (and
I tried to add a new Hard disk. It's s Seagate ST39102LW 8.1 Gb.
In the BIOS setup of the BusLogic adapter, I was able to format
and verify the disk with no problems whatsoever.
fdisk seemed to work okay. I made partitions.
mke2fs would fail (hang the system) while writing inodes.
The BusLogic
I tried to add a new Hard disk. It's s Seagate ST39102LW 8.1 Gb.
In the BIOS setup of the BusLogic adapter, I was able to format
and verify the disk with no problems whatsoever.
fdisk seemed to work okay. I made partitions.
mke2fs would fail (hang the system) while writing inodes.
The BusLogic
On Wed, Oct 11, 2000 at 05:11:39PM -0400, Richard B. Johnson wrote:
Linux version 2.2.17
I tried to add a new Hard disk. It's s Seagate ST39102LW 8.1 Gb.
Hmm. Your C/H/S multiplies out to 9.1 GB.
On the other hand, Seagate ST39102LW has 9105018880 bytes,
so probably the 8 was a typo (and you
16 matches
Mail list logo
