Hello!
[problem with PCI riser card, hardware discussion]
First the riser card is a dual slot one , with a chip on it so I assumed
it is active. It has jumpers to set the device number of the upper slot
and the devices in the two slots have to share the IRQ. This is it
here :
Islam Amer <[EMAIL PROTECTED]> writes:
> First the riser card is a dual slot one , with a chip on it so I assumed
> it is active.
Perhaps REQ/GNT arbiter. A PCI-PCI bridge is a 100+ pin chip.
> Third : The bug lies in the situation where the PVR-150 card is in the
> upper slot and the DVB card
On Thu, 2007-06-28 at 19:04 +0200, Clemens Koller wrote:
> Hi, Lennart!
>
> Lennart Sorensen schrieb:
> > On Thu, Jun 28, 2007 at 05:32:48PM +0200, Clemens Koller wrote:
> >> Robert Hancock schrieb:
> >>> Islam Amer wrote:
> I am trying to build a settop box with two cards, a PVR-150 and a
On Thu, 2007-06-28 at 19:04 +0200, Clemens Koller wrote:
Hi, Lennart!
Lennart Sorensen schrieb:
On Thu, Jun 28, 2007 at 05:32:48PM +0200, Clemens Koller wrote:
Robert Hancock schrieb:
Islam Amer wrote:
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The
Islam Amer [EMAIL PROTECTED] writes:
First the riser card is a dual slot one , with a chip on it so I assumed
it is active.
Perhaps REQ/GNT arbiter. A PCI-PCI bridge is a 100+ pin chip.
Third : The bug lies in the situation where the PVR-150 card is in the
upper slot and the DVB card is in
Hello!
[problem with PCI riser card, hardware discussion]
First the riser card is a dual slot one , with a chip on it so I assumed
it is active. It has jumpers to set the device number of the upper slot
and the devices in the two slots have to share the IRQ. This is it
here :
Islam Amer <[EMAIL PROTECTED]> writes:
> [ 37.298400] ACPI: PCI Interrupt :00:05.0[A] -> GSI 17 (level,
> low) -> IRQ 22
> [ 37.298413] saa7134[0]: found at :00:05.0, rev: 1, irq: 22,
> latency: 32, mmio: 0x0
The riser card must not be very active as the device(s) are sitting
on bus
Islam Amer [EMAIL PROTECTED] writes:
[ 37.298400] ACPI: PCI Interrupt :00:05.0[A] - GSI 17 (level,
low) - IRQ 22
[ 37.298413] saa7134[0]: found at :00:05.0, rev: 1, irq: 22,
latency: 32, mmio: 0x0
The riser card must not be very active as the device(s) are sitting
on bus #0, that
Hi, Lennart!
Lennart Sorensen schrieb:
On Thu, Jun 28, 2007 at 05:32:48PM +0200, Clemens Koller wrote:
Robert Hancock schrieb:
Islam Amer wrote:
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active
On Thu, Jun 28, 2007 at 05:32:48PM +0200, Clemens Koller wrote:
> Robert Hancock schrieb:
> >Islam Amer wrote:
> >> I am trying to build a settop box with two cards, a PVR-150 and a DVB
> >> card. The mini-ITX motherboard has only one PCI slot, so I bought an
> >> active PCI riser.
>
> Please
Hi, Robert!
Robert Hancock schrieb:
Islam Amer wrote:
>> I am trying to build a settop box with two cards, a PVR-150 and a DVB
>> card. The mini-ITX motherboard has only one PCI slot, so I bought an
>> active PCI riser.
Please define "active". Is there a PCI bridge chip on the riser card?
Or
Islam Amer wrote:
Hello everyone.
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active PCI riser.
First I tried with two cheap lifeview cards on the riser and they
worked.
The PVR-150 is working fine
Hello everyone.
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active PCI riser.
First I tried with two cheap lifeview cards on the riser and they
worked.
The PVR-150 is working fine alone, and so does
Hello everyone.
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active PCI riser.
First I tried with two cheap lifeview cards on the riser and they
worked.
The PVR-150 is working fine alone, and so does
Islam Amer wrote:
Hello everyone.
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active PCI riser.
First I tried with two cheap lifeview cards on the riser and they
worked.
The PVR-150 is working fine
Hi, Robert!
Robert Hancock schrieb:
Islam Amer wrote:
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active PCI riser.
Please define active. Is there a PCI bridge chip on the riser card?
Or better:
On Thu, Jun 28, 2007 at 05:32:48PM +0200, Clemens Koller wrote:
Robert Hancock schrieb:
Islam Amer wrote:
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active PCI riser.
Please define active. Is
Hi, Lennart!
Lennart Sorensen schrieb:
On Thu, Jun 28, 2007 at 05:32:48PM +0200, Clemens Koller wrote:
Robert Hancock schrieb:
Islam Amer wrote:
I am trying to build a settop box with two cards, a PVR-150 and a DVB
card. The mini-ITX motherboard has only one PCI slot, so I bought an
active
18 matches
Mail list logo
