During boot, I get the message:
PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try
using pci=biosirq.
If I boot with pci=biosirq, as the error message suggests, I get the
same error, save the part about trying with pci=biosirq. This is with
version 2.4.0-test11-pre7 and as far
Hello!
> During boot, I get the message:
>
> PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try
> using pci=biosirq.
Can you send me 'lspci -vvx' output, please?
Have a nice fortnight
--
Martin `MJ' Mares <[EMAIL PROTECTED]> <[EMAIL PROTECTED]
Martin Mares <[EMAIL PROTECTED]> writes:
> > During boot, I get the message:
> >
> > PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try
> > using pci=biosirq.
>
> Can you send me 'lspci -vvx' output, please?
>
i am not the original poster, but i get the same message (save fo
On Sun, Nov 19, 2000 at 08:20:33PM +0100, Martin Mares wrote:
> > During boot, I get the message:
> >
> > PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try
> > using pci=biosirq.
>
> Can you send me 'lspci -vvx' output, please?
>
Here you go:
00:00.0 Host bridge: Silicon Int
> During boot, I get the message:
>
> PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try
> using pci=biosirq.
It is related to VGA card (at least on my system).
Enabling 'Assign IRQ for VGA' in BIOS causes the message to disapear.
Pavel
-
To unsubscribe from this list: send t
That looks exactly like the message I get if I tell the bios not to assign
an interrupt to my video card.
Gerhard
On 19 Nov 2000, Alex Romosan wrote:
> Martin Mares <[EMAIL PROTECTED]> writes:
>
> > > During boot, I get the message:
> > >
> > > PCI: No IRQ known for interrupt pin A
Gerhard Mack <[EMAIL PROTECTED]> writes:
> That looks exactly like the message I get if I tell the bios not to
> assign an interrupt to my video card.
>
unfortunately, i don't get such a choice. and if what you say is true,
isn't the message ("No IRQ known for interrupt pin A of device
05:00.0.
I'm getting the same message with 2.4.0-test10 on a sis chipset. There
doesn't seam to be any other problems, and ide0 appears in
/proc/interrupts.
# dmesg |grep ^PCI
PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Canno
8 matches
Mail list logo