2014-09-09 4:41 GMT+02:00 Robin Gong :
> Thanks for Mark's forward.
>
> Hi Jean-Michel,
> Yes, SWxOMODE can be set as 1 to active sleep mode if PWRON turn-off event
> occurs. And the voltage of sleep mode can be set in other register SWxOFF. But
> by default, SWxOMODE is 0 which means all SW
2014-09-09 4:41 GMT+02:00 Robin Gong b38...@freescale.com:
Thanks for Mark's forward.
Hi Jean-Michel,
Yes, SWxOMODE can be set as 1 to active sleep mode if PWRON turn-off event
occurs. And the voltage of sleep mode can be set in other register SWxOFF. But
by default, SWxOMODE is 0 which
Thanks for Mark's forward.
Hi Jean-Michel,
Yes, SWxOMODE can be set as 1 to active sleep mode if PWRON turn-off event
occurs. And the voltage of sleep mode can be set in other register SWxOFF. But
by default, SWxOMODE is 0 which means all SW will be turned off while PWRON go
form 1 to 0. For
Thanks for Mark's forward.
Hi Jean-Michel,
Yes, SWxOMODE can be set as 1 to active sleep mode if PWRON turn-off event
occurs. And the voltage of sleep mode can be set in other register SWxOFF. But
by default, SWxOMODE is 0 which means all SW will be turned off while PWRON go
form 1 to 0. For
On Wed, Sep 03, 2014 at 11:44:22AM +0200, Jean-Michel Hautbois wrote:
> I have a custom i.MX6 based board, but PMIC part is exactly the same
> as the Freescale SabreSD board.
> I have a reset button, which makes the PWRON signal on PFUZE100 go from 1 to
> 0.
> I thought this would reset the
Hi,
I have a custom i.MX6 based board, but PMIC part is exactly the same
as the Freescale SabreSD board.
I have a reset button, which makes the PWRON signal on PFUZE100 go from 1 to 0.
I thought this would reset the chip, and thus all voltages would go to
0, but this is not the case. It seems
Hi,
I have a custom i.MX6 based board, but PMIC part is exactly the same
as the Freescale SabreSD board.
I have a reset button, which makes the PWRON signal on PFUZE100 go from 1 to 0.
I thought this would reset the chip, and thus all voltages would go to
0, but this is not the case. It seems
On Wed, Sep 03, 2014 at 11:44:22AM +0200, Jean-Michel Hautbois wrote:
I have a custom i.MX6 based board, but PMIC part is exactly the same
as the Freescale SabreSD board.
I have a reset button, which makes the PWRON signal on PFUZE100 go from 1 to
0.
I thought this would reset the chip, and
8 matches
Mail list logo