Blew sky high. Booted stock 2.4.3-ac3, K7 optimizations, init=/bin/sh.
First time it went fine for quite some time (10-15 mins, find / -print,
etc) and then locked up hard on "open". Second time, it oops'd before
hardlocking (which I copied out by hand.) The oops and decode are
attached.
On Fr
> On the iwill mobo? (I haven't heard of this problem on other
> motherboards.)
Im not using an Iwill board. I'm using an AMD751/756 based board and an old
'Uncle Fester' reference board.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAI
On the iwill mobo? (I haven't heard of this problem on other
motherboards.)
I'll grab the latest -ac today and give it a try this evening.
(Just for reference, the system is the Iwill kk266, 1.2G tbird, 512M
pc133, ata66 drive - everything has AMD-approved stickers and nothing is
overclocked.)
> settings or what, but whenever I try to run a 2.4.x kernel on my machine
> with k7 optimizations the computer will never fully boot and seems to
> give random errors about being "unable to handle kernel NULL pointer
> dereference at virtual address " and other errors.
I run the K7 op
Several of us on the list had the same/similar problems. AFAIK the only
fix at this point is to run w/ no more than K6 optimizations.
Check the archives for
-> Only 10 MB/sec with via 82c686b (towards the end of the thread)
-> thunderbird 1.2G + kk266 + 2.4.x oops
It seems to be something wierd
Hi,
I don't know if this is a problem with my hardware setup or config
settings or what, but whenever I try to run a 2.4.x kernel on my machine
with k7 optimizations the computer will never fully boot and seems to
give random errors about being "unable to handle kernel NULL pointer
derefe
6 matches
Mail list logo