* Ivan Djelic [121011 01:23]:
>
> I don't know which way is better for the OMAP community:
> 1. Unifying ECC modes = loosing the constant polynomial benefits, but gaining
> RBL compat and simplifying code
> 2. Keeping separate ECC modes = code bloat
>
> Tony, do you have an opinion on this ?
W
On Thu, Oct 11, 2012 at 13:51:49, Ivan Djelic wrote:
> On Thu, Oct 11, 2012 at 06:27:13AM +0100, Philip, Avinash wrote:
> (...)
> > > Another simple strategy could use the fact that you add a 14th zero byte
> > > to
> > > the 13 BCH bytes for RBL compatibility:
> >
> > RBL compatibility (14th byt
On Thu, Oct 11, 2012 at 06:27:13AM +0100, Philip, Avinash wrote:
(...)
> > Another simple strategy could use the fact that you add a 14th zero byte to
> > the 13 BCH bytes for RBL compatibility:
>
> RBL compatibility (14th byte) is applicable only for BCH8 ecc scheme.
>
> So I am planning adding
On Wed, Oct 10, 2012 at 22:38:06, Ivan Djelic wrote:
> On Tue, Oct 09, 2012 at 01:36:50PM +0100, Philip, Avinash wrote:
> (...)
> > > There are at least 2 potential problems when reading an erased page with
> > > bitflips:
> > >
> > > 1. bitflip in data area and no bitflip in spare area (all 0xff
On Tue, Oct 09, 2012 at 01:36:50PM +0100, Philip, Avinash wrote:
(...)
> > There are at least 2 potential problems when reading an erased page with
> > bitflips:
> >
> > 1. bitflip in data area and no bitflip in spare area (all 0xff)
> > Your code will not perform any ECC correction.
> > UBIFS do
On Fri, Oct 05, 2012 at 19:53:38, Ivan Djelic wrote:
> On Fri, Oct 05, 2012 at 09:51:50AM +0100, Philip, Avinash wrote:
> > On Thu, Oct 04, 2012 at 15:51:03, Philip, Avinash wrote:
> > > On Thu, Oct 04, 2012 at 00:50:45, Ivan Djelic wrote:
> > > > On Wed, Oct 03, 2012 at 03:29:49PM +0100, Philip, A
On Fri, Oct 05, 2012 at 09:51:50AM +0100, Philip, Avinash wrote:
> On Thu, Oct 04, 2012 at 15:51:03, Philip, Avinash wrote:
> > On Thu, Oct 04, 2012 at 00:50:45, Ivan Djelic wrote:
> > > On Wed, Oct 03, 2012 at 03:29:49PM +0100, Philip, Avinash wrote:
> > > > ELM module can be used for error correc
On Thu, Oct 04, 2012 at 15:51:03, Philip, Avinash wrote:
> On Thu, Oct 04, 2012 at 00:50:45, Ivan Djelic wrote:
> > On Wed, Oct 03, 2012 at 03:29:49PM +0100, Philip, Avinash wrote:
> > > ELM module can be used for error correction of BCH 4 & 8 bit. Also
> > > support read & write page in one shot b
On Thu, Oct 04, 2012 at 00:50:45, Ivan Djelic wrote:
> On Wed, Oct 03, 2012 at 03:29:49PM +0100, Philip, Avinash wrote:
> > ELM module can be used for error correction of BCH 4 & 8 bit. Also
> > support read & write page in one shot by adding custom read_page &
> > write_page methods. This helps in
On Wed, Oct 03, 2012 at 03:29:49PM +0100, Philip, Avinash wrote:
> ELM module can be used for error correction of BCH 4 & 8 bit. Also
> support read & write page in one shot by adding custom read_page &
> write_page methods. This helps in optimizing code.
>
> New structure member "is_elm_used" is
10 matches
Mail list logo