> This is alive and well in 2.6.13 (final) on ia64.
Or perhaps not. When I went into the machine room to take
a look at this machine, I found that the disk drive in
question was making some very bad noises. A few minutes
later it stopped responding at all.
Putting in a new drive, I see a
This is alive and well in 2.6.13 (final) on ia64. Excerpts from dmesg
when booting:
Fusion MPT base driver 3.03.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.02
GSI 28 (level, low) -> CPU 1 (0xc218) vector 49
ACPI: PCI Interrupt :06:02.0[A] -> GSI 28
This is alive and well in 2.6.13 (final) on ia64. Excerpts from dmesg
when booting:
Fusion MPT base driver 3.03.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.02
GSI 28 (level, low) - CPU 1 (0xc218) vector 49
ACPI: PCI Interrupt :06:02.0[A] - GSI 28 (level,
This is alive and well in 2.6.13 (final) on ia64.
Or perhaps not. When I went into the machine room to take
a look at this machine, I found that the disk drive in
question was making some very bad noises. A few minutes
later it stopped responding at all.
Putting in a new drive, I see a
On Mon, 8 Aug 2005, Moore, Eric Dean wrote:
On Sunday, August 07, 2005 8:30 AM, James Bottomley wrote:
On Sun, 2005-08-07 at 05:59 +, Holger Kiehl wrote:
Thanks, removing those it compiles fine. This patch also
solves my problem,
here the output of dmesg:
Well ... the transport class
On Mon, 8 Aug 2005, Moore, Eric Dean wrote:
On Sunday, August 07, 2005 8:30 AM, James Bottomley wrote:
On Sun, 2005-08-07 at 05:59 +, Holger Kiehl wrote:
Thanks, removing those it compiles fine. This patch also
solves my problem,
here the output of dmesg:
Well ... the transport class
On Sunday, August 07, 2005 8:30 AM, James Bottomley wrote:
> On Sun, 2005-08-07 at 05:59 +, Holger Kiehl wrote:
> > Thanks, removing those it compiles fine. This patch also
> solves my problem,
> > here the output of dmesg:
>
> Well ... the transport class was supposed to help diagnose the
On Sunday, August 07, 2005 8:30 AM, James Bottomley wrote:
On Sun, 2005-08-07 at 05:59 +, Holger Kiehl wrote:
Thanks, removing those it compiles fine. This patch also
solves my problem,
here the output of dmesg:
Well ... the transport class was supposed to help diagnose the problem
On Sun, 2005-08-07 at 05:59 +, Holger Kiehl wrote:
> Thanks, removing those it compiles fine. This patch also solves my problem,
> here the output of dmesg:
Well ... the transport class was supposed to help diagnose the problem
rather than fix it.
However, what it shows is that the original
On Sat, 6 Aug 2005, James Bottomley wrote:
On Sat, 2005-08-06 at 21:12 +, Holger Kiehl wrote:
drivers/message/fusion/mptspi.c:505: error: unknown field
â..get_hold_mcsâ.. specified in initializer
drivers/message/fusion/mptspi.c:505: warning: excess elements in struct
initializer
On Sat, 6 Aug 2005, James Bottomley wrote:
On Sat, 2005-08-06 at 21:12 +, Holger Kiehl wrote:
drivers/message/fusion/mptspi.c:505: error: unknown field
â..get_hold_mcsâ.. specified in initializer
drivers/message/fusion/mptspi.c:505: warning: excess elements in struct
initializer
On Sun, 2005-08-07 at 05:59 +, Holger Kiehl wrote:
Thanks, removing those it compiles fine. This patch also solves my problem,
here the output of dmesg:
Well ... the transport class was supposed to help diagnose the problem
rather than fix it.
However, what it shows is that the original
On Sat, 2005-08-06 at 21:12 +, Holger Kiehl wrote:
> I tried from 2.6.13-rc2-mm2 up to 2.6.13-rc4-mm1 and always get the following
> error when applying this patch:
>
> CC drivers/message/fusion/mptbase.o
> CC drivers/message/fusion/mptscsih.o
> CC
On Sat, 6 Aug 2005, James Bottomley wrote:
On Mon, 2005-08-01 at 15:40 +, Holger Kiehl wrote:
No I did not get it. Can you please send it to me or tell me where I can
download it?
OK, since this has stalled, how about trying a different approach.
If you apply the attached patch it will
On Mon, 2005-08-01 at 15:40 +, Holger Kiehl wrote:
> No I did not get it. Can you please send it to me or tell me where I can
> download it?
OK, since this has stalled, how about trying a different approach.
If you apply the attached patch it will cause fusion to use the
transport class
On Mon, 2005-08-01 at 15:40 +, Holger Kiehl wrote:
No I did not get it. Can you please send it to me or tell me where I can
download it?
OK, since this has stalled, how about trying a different approach.
If you apply the attached patch it will cause fusion to use the
transport class domain
On Sat, 6 Aug 2005, James Bottomley wrote:
On Mon, 2005-08-01 at 15:40 +, Holger Kiehl wrote:
No I did not get it. Can you please send it to me or tell me where I can
download it?
OK, since this has stalled, how about trying a different approach.
If you apply the attached patch it will
On Sat, 2005-08-06 at 21:12 +, Holger Kiehl wrote:
I tried from 2.6.13-rc2-mm2 up to 2.6.13-rc4-mm1 and always get the following
error when applying this patch:
CC drivers/message/fusion/mptbase.o
CC drivers/message/fusion/mptscsih.o
CC
No I did not get it. Can you please send it to me or tell me where I can
download it?
Thanks,
Holger
--
On Mon, 1 Aug 2005, Moore, Eric Dean wrote:
I provided an application called getspeed as an attachment
in the email I sent last Friday. Did you receive that, or do
I need to resend? If
I provided an application called getspeed as an attachment
in the email I sent last Friday. Did you receive that, or do
I need to resend? If possible, can run that application
and send me the output.
Regards,
Eric Moore
On Monday, August 01, 2005 4:16 AM, Holger Kiehl wrote:
> On Fri, 29 Jul
On Fri, 29 Jul 2005, Andrew Morton wrote:
"Moore, Eric Dean" <[EMAIL PROTECTED]> wrote:
Regarding the 1st issue, can you try this patch out. It maybe in the
-mm branch. Andrew cc'd on this email can confirm.
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13-rc3/2.6
On Fri, 29 Jul 2005, Andrew Morton wrote:
Moore, Eric Dean [EMAIL PROTECTED] wrote:
Regarding the 1st issue, can you try this patch out. It maybe in the
-mm branch. Andrew cc'd on this email can confirm.
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13-rc3/2.6
I provided an application called getspeed as an attachment
in the email I sent last Friday. Did you receive that, or do
I need to resend? If possible, can run that application
and send me the output.
Regards,
Eric Moore
On Monday, August 01, 2005 4:16 AM, Holger Kiehl wrote:
On Fri, 29 Jul
No I did not get it. Can you please send it to me or tell me where I can
download it?
Thanks,
Holger
--
On Mon, 1 Aug 2005, Moore, Eric Dean wrote:
I provided an application called getspeed as an attachment
in the email I sent last Friday. Did you receive that, or do
I need to resend? If
"Moore, Eric Dean" <[EMAIL PROTECTED]> wrote:
>
> Regarding the 1st issue, can you try this patch out. It maybe in the
> -mm branch. Andrew cc'd on this email can confirm.
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13-rc3/2.6
>
Moore, Eric Dean [EMAIL PROTECTED] wrote:
Regarding the 1st issue, can you try this patch out. It maybe in the
-mm branch. Andrew cc'd on this email can confirm.
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13-rc3/2.6
26 matches
Mail list logo
