Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-08-19 Thread Alexander Fieroch
Andrew Morton wrote: > If > any bugs remain, please raise entries for them at bugzilla.kernel.org, > thanks. I've raised an entry for that bug at http://bugzilla.kernel.org/show_bug.cgi?id=5084 Perhaps you want to add your address to the CC-list and perhaps you get new ideas with the different sys

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-08-09 Thread Alan Cox
On Maw, 2005-08-09 at 19:28 +0200, Alexander Fieroch wrote: > Andrew Morton wrote: > > Please check 2.6.13-rc6 when it's out - this might fix the IRQ problem. > > The errors "irq XXX: nobody cared" and "hdb: cdrom_pc_intr: The drive > appears confused (ireason = 0x01)" still occur in kernel 2.6.1

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-08-01 Thread Bartlomiej Zolnierkiewicz
On 8/1/05, Krzysztof Halasa <[EMAIL PROTECTED]> wrote: > Alexander Fieroch <[EMAIL PROTECTED]> writes: > > > hdb: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } > > hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 } > > ide: failed opcode was: unknown > ^

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-08-01 Thread Krzysztof Halasa
Alexander Fieroch <[EMAIL PROTECTED]> writes: > hdb: media error (bad sector): status=0x51 { DriveReady SeekComplete Error } > hdb: media error (bad sector): error=0x30 { LastFailedSense=0x03 } > ide: failed opcode was: unknown ^^^ > end_request: I/O error, dev hdb, s

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-08-01 Thread Alexander Fieroch
args, I forgot the syslog. Attached.. Aug 1 15:27:17 orclex syslog-ng[3483]: syslog-ng version 1.6.8 starting Aug 1 15:27:17 orclex syslog-ng[3483]: Changing permissions on special file /dev/xconsole Aug 1 15:27:17 orclex kernel: Bootdata ok (command line is root=/dev/sda3 ro vga=792 pci=rou

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-08-01 Thread Alexander Fieroch
Alexey Dobriyan wrote: --- 2.6.12-r4.txt [1] +++ 2.6.12-r6.txt [2] +1003_linux-2.6.12.3.patch <---+ +1370_sparc-modpost_stt_reg.patch | -1900_acpi-irq-0.patch included in + no change

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-07-31 Thread Alexander Fieroch
Michael Thonke wrote: Hello Alexander, do you run A.) SATA in Enhanced Mode B.) SATA+PATA or PATA operation mode? This problem I can reproduce when I set A.)+B.) in bios I exactly get the same behavior of confused cd - drives. Yes, I'm running SATA in enhanced mode with SATA+PATA operation m

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-07-29 Thread Alexey Dobriyan
On Fri, Jul 29, 2005 at 07:05:36PM -0400, Parag Warudkar wrote: > On Friday 29 July 2005 20:57, Michael Thonke wrote: > > do you run > > A.) SATA in Enhanced Mode > > B.) SATA+PATA or PATA operation mode? > > > > This problem I can reproduce when I ?set A.)+B.) in bios I > > exactly get the same be

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-07-29 Thread Parag Warudkar
On Friday 29 July 2005 20:57, Michael Thonke wrote: > Hello Alexander, > > do you run > A.) SATA in Enhanced Mode > B.) SATA+PATA or PATA operation mode? > > This problem I can reproduce when I  set A.)+B.) in bios I > exactly get the same behavior of confused cd - drives. > > Greets > > Best regar

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-07-29 Thread Michael Thonke
Alexander Fieroch schrieb: Andrew Morton wrote: > Is 2.6.13-rc4 running OK? If not, please cc linux-kernel on the reply and > re-summarise the problem, thanks. Same problems as before occur in kernel 2.6.13rc4, too. I've attached the syslog with kernel parameters "acpi=debug pci=routeirq a

RE: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-07-06 Thread Protasevich, Natalie
> Hm, I did not get any answer to my last report last week. > Didn't you get it? > > There are still the same errors in kernel 2.6.13rc2 as in > 2.6.13rc1. So I've attached an up to date syslog and the last > error report below. > Hi Alexander, To me, it looks like both IDE channels get wrong

Re: PROBLEM: "drive appears confused" and "irq 18: nobody cared!"

2005-07-06 Thread Alexander Fieroch
Protasevich, Natalie wrote: Hi Alexander, To me, it looks like both IDE channels get wrong IRQ. Didn't you verified previously that when you go without IDE the system boots up OK? Yes it does. That's the way I'm currently using linux. They get some interrupts because when IRQ 201 occurs trigg