On Fri, 25 Jul 2014 11:29:06 -0700
Linus Torvalds wrote:
> On Fri, Jul 25, 2014 at 7:02 AM, Steven Rostedt wrote:
> >
> > But wouldn't it be rather trivial to run a static analyzer on the final
> > vmlinux to make sure there are no red zones? I mean, you would only need
> > to read each function
On 27.07.2014 03:02, Steven Chamberlain wrote:
> On 25/07/14 02:25, Michel Dänzer wrote:
>> Attached is fair.s from Debian gcc 4.8.3-5. Does that look better? I'm
>> going to try reproducing the problem with a kernel built by that now.
>
> It looks like gcc-4.9 Debian package version 4.9.1-2 avail
On Mon, Jul 28, 2014 at 08:09:02PM +0200, Markus Trippelsdorf wrote:
> Here's the testcase:
>
> int a, b, c;
> void fn1 ()
> {
> int d;
> if (fn2 () && !0)
> {
> b = (
>{
>int e;
>fn3 ();
>switch (0)
>default:
>a
On 29.07.2014 01:48, Linus Torvalds wrote:
> On Sun, Jul 27, 2014 at 8:47 PM, Michel Dänzer wrote:
>> On 27.07.2014 04:56, Linus Torvalds wrote:
>>>
>>> Also, Michel - can you try this patch if you still have your
>>> gcc-4.9.0 install, and send me the resulting fair.s file again?
>>
>> Attached.
On Mon, Jul 28, 2014 at 10:27:39AM -0700, Alexei Starovoitov wrote:
>
> It's not pretty, but adding it unconditionally was the right thing to do.
> Black listing compiler versions is too fragile.
> Look at the flip side: now size of build dir will be much smaller :)
White-listing the fixed compil
On 2014.07.28 at 11:28 -0700, Linus Torvalds wrote:
> On Mon, Jul 28, 2014 at 11:09 AM, Markus Trippelsdorf
> wrote:
> >
> > It shouldn't be too hard to implement a simple check for the bug in the
> > next release. Just compile the gcc/testsuite/gcc.target/i386/pr61801.c
> > testcase with -fcompar
On Mon, Jul 28, 2014 at 11:09 AM, Markus Trippelsdorf
wrote:
>
> It shouldn't be too hard to implement a simple check for the bug in the
> next release. Just compile the gcc/testsuite/gcc.target/i386/pr61801.c
> testcase with -fcompare-debug. If gcc returns 0 then
> -fvar-tracking-assignments coul
On 2014.07.28 at 10:27 -0700, Alexei Starovoitov wrote:
> On Mon, Jul 28, 2014 at 09:45:45AM -0700, Linus Torvalds wrote:
> > On Mon, Jul 28, 2014 at 5:26 AM, Frank Ch. Eigler wrote:
> > >
> > > Please note that the data produced by "-g -fvar-tracking" is consumed
> > > by tools like systemtap, pe
On Mon, Jul 28, 2014 at 09:45:45AM -0700, Linus Torvalds wrote:
> On Mon, Jul 28, 2014 at 5:26 AM, Frank Ch. Eigler wrote:
> >
> > Please note that the data produced by "-g -fvar-tracking" is consumed
> > by tools like systemtap, perf, crash, and makes a significant
> > difference to the observabi
On Sun, Jul 27, 2014 at 8:47 PM, Michel Dänzer wrote:
> On 27.07.2014 04:56, Linus Torvalds wrote:
>>
>> Also, Michel - can you try this patch if you still have your
>> gcc-4.9.0 install, and send me the resulting fair.s file again?
>
> Attached.
The frame setup looks fine to me now (apart from
On Mon, Jul 28, 2014 at 5:26 AM, Frank Ch. Eigler wrote:
>
> Please note that the data produced by "-g -fvar-tracking" is consumed
> by tools like systemtap, perf, crash, and makes a significant
> difference to the observability of debug AND non-debug kernels.
Yeah, and compared to having a buggy
Hi -
On Mon, Jul 28, 2014 at 09:10:04AM -0400, Theodore Ts'o wrote:
> [...]
> I thought Markus told us that -fno-var-tracking-assignments makes
> absolutely no difference for non-debug kernels?
It does affect CONFIG_DEBUG_INFO kernels, and that config option is
set for all Red Hat kernels (-debug
On Mon, Jul 28, 2014 at 08:26:59AM -0400, Frank Ch. Eigler wrote:
> Please note that the data produced by "-g -fvar-tracking" is consumed
> by tools like systemtap, perf, crash, and makes a significant
> difference to the observability of debug AND non-debug kernels. (The
> presence of compiled-in
torvalds wrote:
> [...]
> Actually, I prefer my patch that did it with cc-option checking, and
> does it unconditionally.
>
> Because if we do it even for non-debug builds - where it ostensibly
> shouldn't matter - we then have that GCC_COMPARE_DEBUG thing working
> regardless of configuration.
On Sat, Jul 26, 2014 at 10:20:55PM +0200, Markus Trippelsdorf wrote:
> On 2014.07.26 at 15:55 -0400, Theodore Ts'o wrote:
> > On Sat, Jul 26, 2014 at 09:35:57PM +0200, Markus Trippelsdorf wrote:
> > >
> > > But fortunately the workaround for the new inode.c bug is the same as
> > > for the origina
On Sat, Jul 26, 2014 at 1:19 PM, Markus Trippelsdorf
wrote:
>
> Yes. The option only affects -g builds.
Ok, good. I'll wait a bit to hopefully get confirmation from Michel's
setup, but this does seem to be the solution.
> So, the option should only be enabled for debugging builds. Something
> li
On 2014.07.26 at 15:55 -0400, Theodore Ts'o wrote:
> On Sat, Jul 26, 2014 at 09:35:57PM +0200, Markus Trippelsdorf wrote:
> >
> > But fortunately the workaround for the new inode.c bug is the same as
> > for the original bug: -fno-var-tracking-assignments.
> >
> > It would make sense to enabled
On 2014.07.26 at 12:56 -0700, Linus Torvalds wrote:
> On Sat, Jul 26, 2014 at 12:35 PM, Markus Trippelsdorf
> wrote:
> >
> > But fortunately the workaround for the new inode.c bug is the same as
> > for the original bug: -fno-var-tracking-assignments.
> >
> > It would make sense to enabled it unco
On Sat, Jul 26, 2014 at 12:56 PM, Linus Torvalds
wrote:
>
> Also, Michel - can you try this patch if you still have your
> gcc-4.9.0 install, and send me the resulting fair.s file again?
Hmm. The good news is that with that patch, the GCC_COMPARE_DEBUG
build succeeds. At least for my small local
On Sat, Jul 26, 2014 at 12:35 PM, Markus Trippelsdorf
wrote:
>
> But fortunately the workaround for the new inode.c bug is the same as
> for the original bug: -fno-var-tracking-assignments.
>
> It would make sense to enabled it unconditionally for all debug
> configurations for now.
So how is cod
On Sat, Jul 26, 2014 at 09:35:57PM +0200, Markus Trippelsdorf wrote:
>
> But fortunately the workaround for the new inode.c bug is the same as
> for the original bug: -fno-var-tracking-assignments.
>
> It would make sense to enabled it unconditionally for all debug
> configurations for now.
Wha
On 2014.07.26 at 11:39 -0700, Linus Torvalds wrote:
> On Sat, Jul 26, 2014 at 11:28 AM, Linus Torvalds
> wrote:
> >
> > That's a bit worrisome. I haven't actually checked if the code
> > generation differs in significant ways yet..
>
> Nope. Just three instructions that got re-ordered from ABC to
Hi Michel,
On 25/07/14 02:25, Michel Dänzer wrote:
> Attached is fair.s from Debian gcc 4.8.3-5. Does that look better? I'm
> going to try reproducing the problem with a kernel built by that now.
It looks like gcc-4.9 Debian package version 4.9.1-2 available in
sid/jessie may have already fixed t
On Sat, Jul 26, 2014 at 11:28 AM, Linus Torvalds
wrote:
>
> That's a bit worrisome. I haven't actually checked if the code
> generation differs in significant ways yet..
Nope. Just three instructions that got re-ordered from ABC to CAB in a
way that makes no difference. But just the knowledge tha
On Fri, Jul 25, 2014 at 11:29 AM, Linus Torvalds
wrote:
>
> I'm sure it's possible, but it sounds potentially complicated.
Hmm. The bugzilla entry just taught me a new gcc flag:
"-fcompare-debug". That apparently makes gcc compile things twice,
once with debugging and once without, and verify tha
On Fri, Jul 25, 2014 at 01:01:11PM -0700, Linus Torvalds wrote:
> For example, gcc will not create a small stack frame with "sub
> $8,%rsp". No, what gcc does is to use a random "push" instruction.
> Fair enough, but that really makes things much harder to see. Here's
> an example:
That is because
On Fri, 25 Jul 2014 13:01:11 -0700
Linus Torvalds wrote:
> For example, gcc will not create a small stack frame with "sub
> $8,%rsp". No, what gcc does is to use a random "push" instruction.
> Fair enough, but that really makes things much harder to see. Here's
> an example:
>
> 81314
On Fri, Jul 25, 2014 at 11:29 AM, Linus Torvalds
wrote:
>
> Some simple pattern to make sure that the "sub $frame-size,%rsp" comes
> before any accesses to (%rbp) (when frame pointers are enabled)
> *might* work, but it might also end up missing things.
You're going to have a hard time doing that
On Fri, 25 Jul 2014 11:29:06 -0700
Linus Torvalds wrote:
> On Fri, Jul 25, 2014 at 7:02 AM, Steven Rostedt wrote:
> >
> > But wouldn't it be rather trivial to run a static analyzer on the final
> > vmlinux to make sure there are no red zones? I mean, you would only need
> > to read each function
On Fri, Jul 25, 2014 at 7:02 AM, Steven Rostedt wrote:
>
> But wouldn't it be rather trivial to run a static analyzer on the final
> vmlinux to make sure there are no red zones? I mean, you would only need
> to read each function and check to make sure that the offset of rbp is
> within the change
On Thu, Jul 24, 2014 at 08:55:28PM -0700, Alexei Starovoitov wrote:
>
> -mno-red-zone only affected prologue emition in gcc. This part didn't
> change between the releases. So the bug is quite deep.
> What seems to be happening is that 2nd pass of instruction scheduler
> (after emit prologue and r
On 2014.07.25 at 11:21 +0200, Markus Trippelsdorf wrote:
> On 2014.07.25 at 18:03 +0900, Michel Dänzer wrote:
> > On 25.07.2014 17:15, Linus Torvalds wrote:
> > > On Thu, Jul 24, 2014 at 11:48 PM, Jakub Jelinek wrote:
> > >>
> > >> Can I ask anyone involved in this for preprocessed source and all
On 2014.07.25 at 18:03 +0900, Michel Dänzer wrote:
> On 25.07.2014 17:15, Linus Torvalds wrote:
> > On Thu, Jul 24, 2014 at 11:48 PM, Jakub Jelinek wrote:
> >>
> >> Can I ask anyone involved in this for preprocessed source and all gcc
> >> command
> >> line options to reproduce it, best in the fo
On 25.07.2014 17:15, Linus Torvalds wrote:
> On Thu, Jul 24, 2014 at 11:48 PM, Jakub Jelinek wrote:
>>
>> Can I ask anyone involved in this for preprocessed source and all gcc command
>> line options to reproduce it, best in the form of a
>> http://gcc.gnu.org/bugzilla/
>> bugreport?
>
> I've cr
On Thu, Jul 24, 2014 at 11:48 PM, Jakub Jelinek wrote:
>
> Can I ask anyone involved in this for preprocessed source and all gcc command
> line options to reproduce it, best in the form of a
> http://gcc.gnu.org/bugzilla/
> bugreport?
I've created bug 61904 for this:
https://gcc.gnu.org/bugzi
On Thu, Jul 24, 2014 at 11:47:17AM -0700, Linus Torvalds wrote:
> Adding Jakub to the cc, because gcc-4.9.0 seems to be terminally broken.
...
> Jakub, any ideas?
Can I ask anyone involved in this for preprocessed source and all gcc command
line options to reproduce it, best in the form of a http:
On Thu, Jul 24, 2014 at 11:55 PM, Alexei Starovoitov wrote:
> On Fri, Jul 25, 2014 at 10:25:03AM +0900, Michel Dänzer wrote:
>> [ Adding the Debian kernel and gcc teams to Cc ]
>>
>> > movq$load_balance_mask, -136(%rbp) #, %sfp
>> > subq$184, %rsp #,
>> >
>> > Anyway,
On Fri, Jul 25, 2014 at 10:25:03AM +0900, Michel Dänzer wrote:
> [ Adding the Debian kernel and gcc teams to Cc ]
>
> > movq$load_balance_mask, -136(%rbp) #, %sfp
> > subq$184, %rsp #,
> >
> > Anyway, this is not a kernel bug. This is your compiler creating
> > compl
On Thu, Jul 24, 2014 at 10:33 PM, Linus Torvalds
wrote:
> On Thu, Jul 24, 2014 at 6:25 PM, Michel Dänzer wrote:
>>
>> Attached is fair.s from Debian gcc 4.8.3-5. Does that look better? I'm
>> going to try reproducing the problem with a kernel built by that now.
>
> This looks better. For roughly
On Thu, Jul 24, 2014 at 9:25 PM, Michel Dänzer wrote:
> [ Adding the Debian kernel and gcc teams to Cc ]
>
> On 25.07.2014 03:47, Linus Torvalds wrote:
>> On Wed, Jul 23, 2014 at 6:43 PM, Michel Dänzer wrote:
Michel, mind doing
make kernel/sched/fair.s
and sendin
On Thu, Jul 24, 2014 at 6:25 PM, Michel Dänzer wrote:
>
> Attached is fair.s from Debian gcc 4.8.3-5. Does that look better? I'm
> going to try reproducing the problem with a kernel built by that now.
This looks better. For roughly that same code sequence it does
(ignoring the debug line and cfi
On Thu, Jul 24, 2014 at 11:47:17AM -0700, Linus Torvalds wrote:
> However, that constant spilling part just counts as "too stupid to
> live". The real bug is this:
>
> movq$load_balance_mask, -136(%rbp) #, %sfp
> subq$184, %rsp #,
>
> where gcc creates the stack fram
On Wed, Jul 23, 2014 at 6:43 PM, Michel Dänzer wrote:
>>
>> Michel, mind doing
>>
>> make kernel/sched/fair.s
>>
>> and sending us the resulting file?
>
> Here it is, gzipped, hope that's okay.
>
> Note that my tree is now based on 3.16-rc6.
Ok, so I'm looking at the code generation and your
On Thu, Jul 24, 2014 at 09:51:57AM +0200, Peter Zijlstra wrote:
> > I hope the assembly output I sent earlier helps, I'm afraid bisecting
> > this could be painful.
>
> Yeah, lemme go have a look...
So I'm not seeing it, the cpus value is kept at -136(%rbp), so
-128(%rbp) comes after and that's s
On Thu, Jul 24, 2014 at 04:18:48PM +0900, Michel Dänzer wrote:
> On 23.07.2014 18:31, Michel Dänzer wrote:
> > On 23.07.2014 18:25, Peter Zijlstra wrote:
> >> On Wed, Jul 23, 2014 at 10:28:19AM +0200, Peter Zijlstra wrote:
> >>
> >>> Of course, the other thing that patch did is clear sgp->power (no
On 23.07.2014 18:31, Michel Dänzer wrote:
> On 23.07.2014 18:25, Peter Zijlstra wrote:
>> On Wed, Jul 23, 2014 at 10:28:19AM +0200, Peter Zijlstra wrote:
>>
>>> Of course, the other thing that patch did is clear sgp->power (now
>>> sgc->capacity).
>>
>> Hmm, re-reading the thread there isn't a cle
On Wed, Jul 23, 2014 at 12:02 PM, Peter Zijlstra wrote:
>
> Here goes..
Oh. So this doesn't have CPUMASK_OFFSTACK set at all, so the pointer
has never been loaded from memory in the first place. The calculation
has been (for me) something like
movq$load_balance_mask, %rax
add
On Wed, Jul 23, 2014 at 11:41 AM, Peter Zijlstra wrote:
>
> OK, that leaves us agreeing we want to clean that up, but still no
> closer to explaining WTH happened on Michel's machine. Weird that.
So looking at that destination pointer value (10043c803e8c), it
*looks* like a pointer. Almost. I
On Wed, Jul 23, 2014 at 11:35:06AM -0700, Linus Torvalds wrote:
> But the code does appear to be correct. It just is messy, avoids the
> proper abstractions, and generates suboptimal code for the off-stack
> case.
OK, that leaves us agreeing we want to clean that up, but still no
closer to explain
On Wed, Jul 23, 2014 at 11:25 AM, Peter Zijlstra wrote:
> On Wed, Jul 23, 2014 at 10:26:21AM -0700, Linus Torvalds wrote:
>>
>> The whole - and really *only* - point of __get_cpu_var is to get the
>> address of a a cpu variable. If you want to read the *value* of the
>> variable, you should use "t
On Wed, Jul 23, 2014 at 11:07:40AM -0700, Linus Torvalds wrote:
> - *static* per-cpu allocations might want to use "cpumask_var_t" (to
> avoid having a full "struct cpumask_t") along with doing a
> "zalloc_cpumask_var_node(..)" for each cpu.
>
> sched_init() follows that last pattern, except it
On Wed, Jul 23, 2014 at 10:15:23AM -0700, Linus Torvalds wrote:
> On Wed, Jul 23, 2014 at 10:04 AM, Peter Zijlstra wrote:
> > On Wed, Jul 23, 2014 at 09:54:23AM -0700, Linus Torvalds wrote:
> >
> >> So the length is fine, and the disassembly shows that it is fixed (16
> >> 32-bit words - why the h
On Wed, Jul 23, 2014 at 10:26:21AM -0700, Linus Torvalds wrote:
> On Wed, Jul 23, 2014 at 10:12 AM, Linus Torvalds
> wrote:
> >
> > sched_init() definitely does _not_ allocate a cpumask_var.
>
> Side note: another good rule of thumb for per-cpu variables is:
>
> - if you use __get_cpu_var() wit
On Wed, Jul 23, 2014 at 10:12:35AM -0700, Linus Torvalds wrote:
> On Wed, Jul 23, 2014 at 10:03 AM, Peter Zijlstra wrote:
> > On Wed, Jul 23, 2014 at 09:54:23AM -0700, Linus Torvalds wrote:
> >>
> >> And I wonder if I have a clue. Look, load_balance_mask is a
> >> "cpumask_var_t", but I don't see
On Wed, Jul 23, 2014 at 09:54:23AM -0700, Linus Torvalds wrote:
> Alternatively, keep it a "cpumask_var_t", but then you need to use
> __get_cpu_pointer() to get the address of it, and use
> "alloc_cpumask_var()" to allocate area for the OFFSTACK case.
>
> TOTALLY UNTESTED AND PROBABLY PURE CRAP P
On Wed, Jul 23, 2014 at 10:12 AM, Linus Torvalds
wrote:
>
> A cpumask_var is TOTALLY DIFFERENT. It's *either* a cpumask _or_ just
> a pointer to an externally allocated cpumask.
>
> sched_init() definitely does _not_ allocate a cpumask_var.
I take that back. It does end up allocating it properly,
On Wed, Jul 23, 2014 at 10:12 AM, Linus Torvalds
wrote:
>
> sched_init() definitely does _not_ allocate a cpumask_var.
Side note: another good rule of thumb for per-cpu variables is:
- if you use __get_cpu_var() without taking the address of it, you're
doing something wrong and stupid.
The who
On Wed, Jul 23, 2014 at 10:04 AM, Peter Zijlstra wrote:
> On Wed, Jul 23, 2014 at 09:54:23AM -0700, Linus Torvalds wrote:
>
>> So the length is fine, and the disassembly shows that it is fixed (16
>> 32-bit words - why the heck does it use "movsl" rather than "movsq",
>> whatever).
>
> Which is ex
On Wed, Jul 23, 2014 at 10:03 AM, Peter Zijlstra wrote:
> On Wed, Jul 23, 2014 at 09:54:23AM -0700, Linus Torvalds wrote:
>>
>> And I wonder if I have a clue. Look, load_balance_mask is a
>> "cpumask_var_t", but I don't see a "alloc_cpumask_var()" for it.
>> That's broken with CONFIG_CPUMASK_OFFST
On Wed, Jul 23, 2014 at 09:54:23AM -0700, Linus Torvalds wrote:
> So the length is fine, and the disassembly shows that it is fixed (16
> 32-bit words - why the heck does it use "movsl" rather than "movsq",
> whatever).
Which is exactly right btw, he's got CONFIG_NR_CPUS=512 and 8*4*16=512.
--
T
On Wed, Jul 23, 2014 at 09:54:23AM -0700, Linus Torvalds wrote:
> On Wed, Jul 23, 2014 at 8:55 AM, Peter Zijlstra wrote:
> >>
> >> I haven't seen the full oops, can you forward the screenshot? The
> >> exact register state might give some clues.
> >
> > Sure, here goes.
>
> So the length is fine,
On Wed, Jul 23, 2014 at 8:55 AM, Peter Zijlstra wrote:
>>
>> I haven't seen the full oops, can you forward the screenshot? The
>> exact register state might give some clues.
>
> Sure, here goes.
So the length is fine, and the disassembly shows that it is fixed (16
32-bit words - why the heck does
On Wed, Jul 23, 2014 at 7:24 AM, Peter Zijlstra wrote:
>
> No way either of those should generate a #GP. Puzzled.
I haven't seen the full oops, can you forward the screenshot? The
exact register state might give some clues.
Linus
--
To unsubscribe from this list: send the line "unsu
On 23.07.2014 23:24, Peter Zijlstra wrote:
> On Wed, Jul 23, 2014 at 01:30:21PM +0200, Peter Zijlstra wrote:
>> On Wed, Jul 23, 2014 at 01:11:10PM +0200, Peter Zijlstra wrote:
>>> On Wed, Jul 23, 2014 at 10:45:46AM +0100, Dietmar Eggemann wrote:
Doesn't the picture showing the captured panic r
On Wed, Jul 23, 2014 at 01:30:21PM +0200, Peter Zijlstra wrote:
> On Wed, Jul 23, 2014 at 01:11:10PM +0200, Peter Zijlstra wrote:
> > On Wed, Jul 23, 2014 at 10:45:46AM +0100, Dietmar Eggemann wrote:
> > > Doesn't the picture showing the captured panic reveal more information.
> > > Haven't seen it
On Wed, Jul 23, 2014 at 01:11:10PM +0200, Peter Zijlstra wrote:
> On Wed, Jul 23, 2014 at 10:45:46AM +0100, Dietmar Eggemann wrote:
> > Doesn't the picture showing the captured panic reveal more information.
> > Haven't seen it myself, I just saw Peter's reply to your email
>
> Its a general prote
On Wed, Jul 23, 2014 at 10:45:46AM +0100, Dietmar Eggemann wrote:
> Doesn't the picture showing the captured panic reveal more information.
> Haven't seen it myself, I just saw Peter's reply to your email
Its a general protection fault from somewhere in load_balance(), I send
you the picture.
It
On Wed, Jul 23, 2014 at 06:31:26PM +0900, Michel Dänzer wrote:
> On 23.07.2014 18:25, Peter Zijlstra wrote:
> > On Wed, Jul 23, 2014 at 10:28:19AM +0200, Peter Zijlstra wrote:
> >
> >> Of course, the other thing that patch did is clear sgp->power (now
> >> sgc->capacity).
> >
> > Hmm, re-reading
On 23/07/14 10:31, Michel Dänzer wrote:
> On 23.07.2014 18:25, Peter Zijlstra wrote:
>> On Wed, Jul 23, 2014 at 10:28:19AM +0200, Peter Zijlstra wrote:
>>
>>> Of course, the other thing that patch did is clear sgp->power (now
>>> sgc->capacity).
>>
>> Hmm, re-reading the thread there isn't a clear
On 23.07.2014 18:25, Peter Zijlstra wrote:
> On Wed, Jul 23, 2014 at 10:28:19AM +0200, Peter Zijlstra wrote:
>
>> Of course, the other thing that patch did is clear sgp->power (now
>> sgc->capacity).
>
> Hmm, re-reading the thread there isn't a clear confirmation its this
> patch at all. Could y
On Wed, Jul 23, 2014 at 10:28:19AM +0200, Peter Zijlstra wrote:
> Of course, the other thing that patch did is clear sgp->power (now
> sgc->capacity).
Hmm, re-reading the thread there isn't a clear confirmation its this
patch at all. Could you perhaps bisect this to either verify it is
indeed th
On Wed, Jul 23, 2014 at 05:05:24PM +0900, Michel Dänzer wrote:
> On 23.07.2014 15:49, Peter Zijlstra wrote:
> Attached. No FAIL messages yet.
> [0.467570] __sdt_alloc: allocated 8802155ea4c0 with cpus:
> [0.467574] __sdt_alloc: allocated 8802155ea3c0 with cpus:
> [0.467576] _
On Tue, Jul 22, 2014 at 09:21:40PM -0700, Linus Torvalds wrote:
> On Tue, Jul 22, 2014 at 8:53 PM, Michel Dänzer wrote:
> >
> > Just happened again with the same change on top of 3.16-rc6.
>
> The (maybe) related bugzilla entry is just odd. Bruno Wolff reports
> that the BUG_ON() in his added pat
On Tue, Jul 22, 2014 at 8:53 PM, Michel Dänzer wrote:
>
> Just happened again with the same change on top of 3.16-rc6.
The (maybe) related bugzilla entry is just odd. Bruno Wolff reports
that the BUG_ON() in his added patch triggers:
+ cpumask_clear(sched_group_cpus(sg));
+
On 22.07.2014 15:13, Michel Dänzer wrote:
> On 18.07.2014 18:29, Michel Dänzer wrote:
>> On 17.07.2014 16:58, Peter Zijlstra wrote:
>>> On Thu, Jul 17, 2014 at 04:31:04PM +0900, Michel Dänzer wrote:
I've been running into the panic captured in the attached picture (hope
it's legible)
On 18.07.2014 18:29, Michel Dänzer wrote:
> On 17.07.2014 16:58, Peter Zijlstra wrote:
>> On Thu, Jul 17, 2014 at 04:31:04PM +0900, Michel Dänzer wrote:
>>>
>>> I've been running into the panic captured in the attached picture (hope
>>> it's legible) randomly while running 3.16-rc4 and -rc5. I have
On 17.07.2014 16:58, Peter Zijlstra wrote:
> On Thu, Jul 17, 2014 at 04:31:04PM +0900, Michel Dänzer wrote:
>>
>> I've been running into the panic captured in the attached picture (hope
>> it's legible) randomly while running 3.16-rc4 and -rc5. I haven't
>> noticed any pattern as to when it happens
On Thu, Jul 17, 2014 at 04:31:04PM +0900, Michel Dänzer wrote:
>
> I've been running into the panic captured in the attached picture (hope
> it's legible) randomly while running 3.16-rc4 and -rc5. I haven't
> noticed any pattern as to when it happens; at least once it happened
> while the box was
78 matches
Mail list logo