* Reizer, Eyal [180507 06:57]:
> Hi Tony,
>
> >
> > Yeah my guess is that the reason for the separate GPIO interrupt was
> > that on omap3 we did not have SDIO interrupt working for years. This was
> > because of the issues related to padconf interrupts for off mode.
> >
> > We now have Linux g
Hi Tony,
>
> Yeah my guess is that the reason for the separate GPIO interrupt was
> that on omap3 we did not have SDIO interrupt working for years. This was
> because of the issues related to padconf interrupts for off mode.
>
> We now have Linux generic wakeirq support working with SDIO and it
* Reizer, Eyal [180506 07:47]:
> I will try to see what I can find out and why it has always been used only
> With out-of band interrupts and whether there is a real hardware
> Limitation behind it .
> In the past also the omap-hsmmc driver was not really supporting in-band
> sdio interrupt out o
>
> * Reizer, Eyal [180503 06:43]:
> > >
> > > * Eyal Reizer [180501 00:26]:
> > > > enable mmc3 used for wlan and uart1 used for bluetooth
> > > > configure the gpios used for wlan and bluetooth controls
> > > > add fixed voltage regulator used for wlan power control
> > > ...
> > > > / {
> >
* Reizer, Eyal [180503 06:43]:
> >
> > * Eyal Reizer [180501 00:26]:
> > > enable mmc3 used for wlan and uart1 used for bluetooth
> > > configure the gpios used for wlan and bluetooth controls
> > > add fixed voltage regulator used for wlan power control
> > ...
> > > / {
> > > model = "TI AM
>
> * Eyal Reizer [180501 00:26]:
> > enable mmc3 used for wlan and uart1 used for bluetooth
> > configure the gpios used for wlan and bluetooth controls
> > add fixed voltage regulator used for wlan power control
> ...
> > / {
> > model = "TI AM437x SK EVM";
> > @@ -158,6 +159,22 @@
> >
* Eyal Reizer [180501 00:26]:
> enable mmc3 used for wlan and uart1 used for bluetooth
> configure the gpios used for wlan and bluetooth controls
> add fixed voltage regulator used for wlan power control
...
> / {
> model = "TI AM437x SK EVM";
> @@ -158,6 +159,22 @@
>
>
> ARM should be capitalized in subject line.
OK, will be fixed in v2
>
> > +
> > +&mmc3 {
> > + status = "okay";
> > + /*
> > +* these are on the crossbar and are outlined in the
> > +* xbar-event-map element
> > +*/
> > + dmas = <&edma_xbar 30 0 1>,
> > + <&edma_xb
On Tuesday 01 May 2018 12:54 PM, Eyal Reizer wrote:
> enable mmc3 used for wlan and uart1 used for bluetooth
> configure the gpios used for wlan and bluetooth controls
> add fixed voltage regulator used for wlan power control
>
> Signed-off-by: Eyal Reizer
ARM should be capitalized in subject li
9 matches
Mail list logo
