Re: stallion driver dmesg notice

Ingo Korb <[EMAIL PROTECTED]> writes: > Loads find and seems to work with basic tests (and no character loss, > yay!). I'll try 8-link bonded ppp when I've set up a second box. Update: The driver now survives 7-link[1] bonded ppp without problems with both UART types. IIRC it previously died with

Re: stallion driver dmesg notice

Jiri Slaby <[EMAIL PROTECTED]> writes: > Okay, tty alloc after pci init, attached patch should fix it. Could you > retest? Loads find and seems to work with basic tests (and no character loss, yay!). I'll try 8-link bonded ppp when I've set up a second box. -ik - To unsubscribe from this list:

Re: stallion driver dmesg notice

Ingo Korb wrote: > > > Should I test it with an EC8/64-PCI? The /32 (ab)uses an IDE controller > > > chip as PCI interface, the /64 uses a PLX PCI9050. > > > > I don't undestand this. IDE grabs the device? This is possible and if yes, > > I'll fix the IDE driver. > > Yes, IDE (specifically: gene

Re: stallion driver dmesg notice

Ingo Korb napsal(a): > Hi! > > The stallion driver in 2.6.21.3 put this little notice in my dmesg: > > === Cut === > Stallion Multiport Serial Driver: version 5.6.0 > stallion :00:0b.0: please, report this to LKML: 100b/d001/ff > ACPI: PCI Interrupt :00:0b.0[A] -> GSI 19 (level, low)