Klaus Reimer ([EMAIL PROTECTED]) said:> 2001-03-29
10:02:50.054774500 {kern|info} kernel: ad1848/cs4248
codec driver
> Copyright (C) by Hannu Savolainen 1993-1996
> 2001-03-29 10:02:50.070692500 {kern|notice} kernel:
opl3sa2: No cards found
> 2001-03-29 10:02:50.070703500 {kern|notice} kernel:
op
The same problem exists for the Toshiba 4000CDS. I think it is because
the OPL3SA2 in these machines is not using PNP.
Probably the support for non-PNP chips broke during the recent update of
the driver (2.4.0 works perfectly).
Jens
On Thu, Mar 29, 2001 at 10:12:40AM +0200, Klaus Reimer wrote:
Hi,
> > Hm, OK, then never mind. :) I don't have an opl3sa2 here to test
> > how well the current driver works.
> I have the feeling that there is going something wrong with the parameters.
> I modified the opl3sa2 driver and manually set the hw_config->io_base
> variable to 0x538 and now THIS pa
Hi,
> > Control I/O: 0x538
> > MPU I/O: 0x330
> Hm, OK, then never mind. :) I don't have an opl3sa2 here to test
> how well the current driver works.
I have the feeling that there is going something wrong with the parameters. I
modified the opl3sa2 driver and manually set the hw_config->io_base
Klaus Reimer ([EMAIL PROTECTED]) said:
> Hi,
>
> > > modprobe opl3sa2 io=0x538 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
> > > isapnp=0
> > It would be what you put in the io= parameter. 0x538 does *not* look
> > right.
>
> These are the sound-settings in the BIOS:
>
> WSS I/O: 0x530
> SBPr
Hi,
> > modprobe opl3sa2 io=0x538 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
> > isapnp=0
> It would be what you put in the io= parameter. 0x538 does *not* look
> right.
These are the sound-settings in the BIOS:
WSS I/O: 0x530
SBPro I/O: 0x220
Synth I/O: 0x388
IRQ: 5
WSS (Play) DMA: 1
WSS (Re
Hi,
> > 2001-03-29 10:02:50.054774500 {kern|info} kernel: ad1848/cs4248 codec
> > driver Copyright (C) by Hannu Savolainen 1993-1996
> > 2001-03-29 10:02:50.070692500 {kern|notice} kernel: opl3sa2: No cards
> > found 2001-03-29 10:02:50.070703500 {kern|notice} kernel: opl3sa2: 0 PnP
> > card(s) f
Klaus Reimer ([EMAIL PROTECTED]) said:
> If I am doing this, I can't even load the module and I get the following
> message in syslog:
>
> 2001-03-29 18:13:14.184156500 {kern|err} kernel: opl3sa2: Control I/O port
> 0x0 not free
>
> What is that "control i/o port"? Is this normally 0x100?
I
Klaus Reimer ([EMAIL PROTECTED]) said:
> 2001-03-29 10:02:50.054774500 {kern|info} kernel: ad1848/cs4248 codec driver
> Copyright (C) by Hannu Savolainen 1993-1996
> 2001-03-29 10:02:50.070692500 {kern|notice} kernel: opl3sa2: No cards found
> 2001-03-29 10:02:50.070703500 {kern|notice} kernel:
Hi,
I have switched from 2.2.17 to 2.4.2 and now the sound is no longer working
on my Toshiba Tecra 8000 Notebook. In 2.2.17 I used the following modules:
mpu401
ad1848
opl3sa2 io=0x538 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
opl3 io=0x388
This was working perfectly. I was able to control
10 matches
Mail list logo