). Is this an obstacle to
merging?
No. I already pushed it.
This is a bump for a 3.7-rc pull request. This regression has been
noticed by others.
[whine] my nand doesn't work ;-)
Thanks for keeping eye on this, Brian.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe
.
Also define 'DA9052_IRQF' for improving readability.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
Reviewed-by: Marek Vasut ma...@denx.de
---
drivers/mfd/da9052-core.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/da9052-core.c b
in:
/home/arnd/linux-arm/arch/arm/mach-pxa/palmte2.c:128:31: warning:
'palmte2_pxa_keys' defined but not used [-Wunused-variable]
Signed-off-by: Arnd Bergmann a...@arndb.de
Cc: Marek Vasut marek.va...@gmail.com
Cc: Carlos Eduardo Medaglia Dyonisio c...@nerdfeliz.com
Cc: Haojian Zhuang
Dear Jingoo Han,
Add 'const' to static array that was missing it in its
definition.
Did you get compiler warning? Still, this is a good pick
Acked-by: Marek Vasut ma...@denx.de
Signed-off-by: Jingoo Han jg1@samsung.com
Cc: Marek Vasut marek.va...@gmail.com
Cc: Richard Purdie rpur
Dear David Woodhouse,
On Tue, 2012-10-09 at 23:39 -0700, Brian Norris wrote:
I can see if that's possible, but I think it's unlikely. They don't
even bother following standards (ONFI). Is this an obstacle to
merging?
No. I already pushed it.
Thanks guys!
Best regards,
Marek Vasut
Dear Jingoo Han,
By using devm_gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using devm_gpio_request_one
can make the code simpler.
Signed-off-by: Jingoo Han jg1@samsung.com
Cc: Richard Purdie rpur...@rpsys.net
Cc: Marek Vasut marek.va
when doing too long chains -- so you
might need to fix that part of the mxs DMA driver.
thanks
Huang Shijie
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
Dear Huang Shijie,
于 2012年10月18日 15:14, Marek Vasut 写道:
Dear Huang Shijie,
Why such massive CC ?
于 2012年10月18日 14:18, Vinod Koul 写道:
Why cant you do start (prepare clock etc) when you submit the
descriptor to dmaengine. Can be done in tx_submit callback.
Similarly remove
Dear Huang Shijie,
于 2012年10月18日 16:16, Marek Vasut 写道:
So we can't stream data from the chip? About time to adjust the MTD
framework to allow that. Maybe implement a command queue?
IMHO, it's not possible. Because the READ-PAGE(00h-30h) command needs to
check the busy status
which
Dear Huang Shijie,
于 2012年10月18日 16:49, Marek Vasut 写道:
Dear Huang Shijie,
于 2012年10月18日 16:16, Marek Vasut 写道:
So we can't stream data from the chip? About time to adjust the MTD
framework to allow that. Maybe implement a command queue?
IMHO, it's not possible. Because the READ
] (worker_thread+0x164/0x36c) from [c00335d8]
(kthread+0x84/0x90)
[3.97] [c00335d8] (kthread+0x84/0x90) from [c000fb70]
(kernel_thread_exit+0x0/0x8)
[3.97] Code: e59a200c e28a0008 e58a900c e9080005 (e5829000)
[3.97] ---[ end trace 7e75d80e67ab9651 ]---
Signed-off-by: Marek
Dear James Bottomley,
On Mon, 2012-07-16 at 15:56 -0700, Dan Williams wrote:
On Mon, Jul 16, 2012 at 3:17 PM, Marek Vasut ma...@denx.de wrote:
[..]
sound/soc/soc-dapm.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
V2: CC proper people, hopefully proper mailing
Dear Jean Delvare,
With the recent code cleanup from Marek Vasut, driver gpio-ucb1400 can
be built as a module, so change symbol GPIO_UCB1400 from bool to
tristate.
Signed-off-by: Jean Delvare jdelv...@suse.de
Cc: Marek Vasut ma...@denx.de
Cc: Grant Likely grant.lik...@secretlab.ca
Cc
data lines routed to the LCD.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Dear Alexandre Pereira da Silva,
Some boards and card slots doesn't have card detect feature available.
In that case allow to mark the cards as non-removable, via devicetree.
Signed-off-by: Alexandre Pereira da Silva aletes@gmail.com
Looks good,
Reviewed-by: Marek Vasut ma...@denx.de
too ;-)
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Dear Mark Brown,
On Fri, Apr 05, 2013 at 08:37:39AM +0200, Marek Vasut wrote:
btw. did you know you can let git send-email automatically handle CC for
you so you don't have to type it into the command line by simply
sticking
Cc: Us Er e...@ma.il
in the commit message? Preferably
Dear Alexandre Pereira da Silva,
On Fri, Apr 5, 2013 at 11:11 AM, Marek Vasut ma...@denx.de wrote:
The CD line is working perfectly well on this board, so I don't get it.
In the schematics of this board, the SSP1_DETECT pin is connected to
the green led. As I see, there is no way
. - non-removable: non-removable slot (like eMMC); assume always
present.
But mxs-mmc set MMC_CAP_NEEDS_POLL unconditionally.
I will work on a better way to fix this.
NEEDS_POLL looks nice and seems to fit this case.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send
just the CD line that's missing.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org
Dear Hector Palacios,
Dear Marek Vasut,
On 04/08/2013 06:28 PM, Marek Vasut wrote:
Dear Shawn Guo,
On Mon, Apr 08, 2013 at 03:58:05PM +0200, Hector Palacios wrote:
On 04/08/2013 02:48 PM, Shawn Guo wrote:
On Mon, Apr 08, 2013 at 12:12:20PM +0200, Hector Palacios wrote:
MicroSD
Hi Hector,
Dear Marek Vasut,
On 04/09/2013 10:15 AM, Marek Vasut wrote:
Dear Hector Palacios,
Dear Marek Vasut,
On 04/08/2013 06:28 PM, Marek Vasut wrote:
Dear Shawn Guo,
On Mon, Apr 08, 2013 at 03:58:05PM +0200, Hector Palacios wrote:
On 04/08/2013 02:48 PM, Shawn Guo
Signed-off-by: Marek Vasut ma...@denx.de
---
drivers/gpio/gpio-ucb1400.c | 19 ++-
drivers/mfd/ucb1400_core.c |5 +
include/linux/ucb1400.h | 18 ++
3 files changed, 17 insertions(+), 25 deletions(-)
v2: Rebase patch from:
http://lists.infradead.org
Dear Marek Vasut,
Cc: Linus Walleij linus.wall...@linaro.org
Cc: Jean Delvare jdelv...@suse.de
Cc: Samuel Ortiz sa...@linux.intel.com
Cc: Mark Brown broo...@opensource.wolfsonmicro.com
Cc: Guenter Roeck li...@roeck-us.net
Cc: linux-kernel linux-kernel@vger.kernel.org
Cc: Grant Likely
don't find any information about the reason.
It's been a while. Guenter, thanks for finding that link, but I suspect the
patch is heavily obsolete by now.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord
Dear Guenter Roeck,
On Sat, Mar 30, 2013 at 08:20:44PM +0100, Marek Vasut wrote:
Dear Guenter Roeck,
On Fri, Mar 29, 2013 at 08:46:39PM +0100, Jean Delvare wrote:
Hi all,
In September 2009, a driver for the GPIO function of the UCB1400 chip
was added to the kernel tree
checked that the mxs-saif interrupt (184) counter suddenly
increased very quickly (from 288 to 45427 in one second, 94471 the next
second, and so on). I was wondering if this happens in other platforms
using this codec or if it is an MXS issue only.
Best regards,
Best regards,
Marek Vasut
any board with this one, yet I think this change is correct, so:
Reviewed-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
) from
the hid tree.
Just context changes. I fixed it up (see below) and can carry the fix as
necessary (no action is required).
Looks obviously correct, thank you Stephen!
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
Dear Peter Senna Tschudin,
From: Peter Senna Tschudin peter.se...@gmail.com
The patch description is a bit crap, but otherwise
Acked-by: Marek Vasut ma...@denx.de
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version
and SPI) from
the spi-mb tree.
I fixed it up (see below) and can carry the fix as necessary (no action
is required).
On a quick glance, it seems correct. Thank you!
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message
Dear Tomas Hlavacek,
Support for read/modify of uartclk via sysfs added.
It may prove useful with some no-name cards that
has different oscillator speeds and no distinguishing
PCI IDs to allow autodetection. It allows better integration
with udev and/or init scripts.
Signed-off-by: Tomas
should submit an accompanying patch that removes
CONFIG_MTD_NAND_VERIFY_WRITE from all defconfig files.
thanks a lot.
I will send out a separate patch to fix it.
I'd still prefer for this to be rather fixed. It seems to be able to find some
obvious mistakes etc.
[...]
Best regards,
Marek
Dear Huang Shijie,
于 2012年08月15日 20:09, Marek Vasut 写道:
I'd still prefer for this to be rather fixed. It seems to be able to find
some obvious mistakes etc.
could you please point out the mistakes?
Usual stuff -- flaws in drivers, misbehavior of the chip etc
Best regards,
Marek Vasut
because of the SPI IP in the mx28 is nice.
Regards,
Fabio Estevam
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read
:)
Good luck with that.
Thanks to all of you who provided suggestions.
Carlo Bastelli
- Original Message -
From: Ned Forrester nforres...@whoi.edu
To: Marek Vasut ma...@denx.de
Cc: Fabio Estevam feste...@gmail.com;
spi-devel-gene...@lists.sourceforge.net; Bastelli Carlo (yahoo
to it.
(hint, DEVICE_ATTR), right ?
Does that make sense?
greg k-h
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read
Dear Shawn Guo,
On 17 August 2012 10:57, Marek Vasut ma...@denx.de wrote:
Thanks ... still, is there some key for those tags? Or do you invent them
at random and then let people guess what's right? Some git grep on
Documentation directory gets me nothing.
There is no official document
in there...)
That might just be it ;-)
Thanks
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
increase the clock freqeuncy driving the timers
here.
Thanks for the set. Just a really quick question -- won't this under no
circumstance cause interrupt storm?
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord
...@the-dreams.de
Something like that is already in -next:
mmc: mxs-mmc: Let device core handle pinctrl
Otherwise
Tested-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
;
}
static void mxs_lradc_trigger_remove(struct iio_dev *iio)
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read
Dear Otavio Salvador,
On Mon, Jul 15, 2013 at 11:24 AM, Marek Vasut marek.va...@gmail.com wrote:
Dear Otavio Salvador,
As we have a 'ret' variable with the iio_trigger_register return, this
can be used as result.
Signed-off-by: Otavio Salvador ota...@ossystems.com.br
time the key will be
Is there no generic prop name for this debounce interval?
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
bits).
Signed-off-by: Hector Palacios hector.palac...@digi.com
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
the whole
patchset because of it.
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read
= mxs_lradc_write_raw_get_fmt,
Is this needed here ?
.attrs = mxs_lradc_attribute_group,
};
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
*/
+ ret = of_property_read_u32_array(node, fsl,vref, lradc-vref_mv,
+ LRADC_MAX_TOTAL_CHANS);
+ if (ret)
+ goto err_addr;
+
platform_set_drvdata(pdev, iio);
init_completion(lradc-completion);
Otherwise:
Acked-by: Marek Vasut ma
declaration of
function 'IOMEM' make[1]: *** [arch/arm/mach-pxa/colibri-evalboard.o]
Error 1
make: *** [arch/arm/mach-pxa] Error 2
Signed-off-by: Dmitry Artamonow mad_s...@inbox.lv
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line
this the same way as the 50MHZ flag, that is
being set by board code.
I wouldn't mind, but we should use something generic the other PHYs can use as
well.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord
on the kernel build command line please?
Thank you very much!
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ
so we can grep for the error messages. Such text arg should
never be split in multiple lines in kernel.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
Dear Andreas Werner,
On Tue, Nov 12, 2013 at 07:00:59PM +0100, Marek Vasut wrote:
Dear Andreas Werner,
Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
the driver will print a lot of error messages if there was no ACK
received.
i2cdetect normally print
Dear Andreas Werner,
On Tue, Nov 12, 2013 at 07:33:40PM +0100, Marek Vasut wrote:
Dear Andreas Werner,
On Tue, Nov 12, 2013 at 07:00:59PM +0100, Marek Vasut wrote:
Dear Andreas Werner,
Using the i2c-eg20t driver and call i2cdetect or probe on the bus,
the driver
On Wednesday, March 12, 2014 at 01:53:14 PM, Matt Ranostay wrote:
AS3935 chipset can detect lightning strikes and reports those back as
events and the estimated distance to the storm.
Signed-off-by: Matt Ranostay mranos...@gmail.com
Reviewed-by: Marek Vasut ma...@denx.de
Best regards,
Marek
On Thursday, February 27, 2014 at 07:05:14 AM, Yuan Yao wrote:
[...]
*/ @@ -63,6 +68,9 @@
/* Default value */
#define IMX_I2C_BIT_RATE 10 /* 100kHz */
+/* enable DMA if transfer size is bigger than this threshold */
+#define IMX_I2C_DMA_THRESHOLD16
So what's the
On Friday, February 28, 2014 at 06:19:18 AM, Yao Yuan wrote:
[...]
@@ -213,6 +238,7 @@ static struct imx_i2c_hwdata vf610_i2c_hwdata = {
.ndivs = ARRAY_SIZE(vf610_i2c_clk_div),
.i2sr_clr_opcode= I2SR_CLR_OPCODE_W1C,
.i2cr_ien_opcode=
On Friday, February 28, 2014 at 03:23:52 AM, Shawn Guo wrote:
On Fri, Feb 28, 2014 at 10:13:02AM +0800, Shawn Guo wrote:
On Thu, Feb 27, 2014 at 09:39:35PM +0100, Marek Vasut wrote:
@@ -193,6 +216,7 @@ static const struct imx_i2c_hwdata
imx1_i2c_hwdata = {
.ndivs
, There are also hard for me. I don't understand what is full-duplex
for dma?
Sorry, nevermind. I was confused by this and some SPI patches review. Like
Lothar (thanks!) pointed out, using only half-duplex operation is OK.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line
On Friday, February 28, 2014 at 11:59:25 AM, Lothar Waßmann wrote:
Hi,
Marek Vasut wrote:
On Friday, February 28, 2014 at 06:19:18 AM, Yao Yuan wrote:
[...]
Yes, here have two dma channels, one for RX and the other one for TX.
When we request the channel we should determine
On Monday, March 03, 2014 at 11:23:33 AM, Yao Yuan wrote:
Hi, Marek
Marek Vasut wrote:
On Thursday, February 27, 2014 at 07:05:14 AM, Yuan Yao wrote:
[...]
+static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) {
+ struct imx_i2c_dma *dma = i2c_imx-dma;
+ struct
On Wednesday, March 05, 2014 at 07:52:31 AM, Yuan Yao wrote:
Add dma support for i2c. This function depend on DMA driver.
You can turn on it by write both the dmas and dma-name properties in dts
node.
Signed-off-by: Yuan Yao yao.y...@freescale.com
---
[...]
struct imx_i2c_struct {
On Thursday, March 06, 2014 at 05:36:14 AM, Yao Yuan wrote:
On Thu, March 06, 2014 at 11:23:50 AM, Marek Vasut wrote:
On Wednesday, March 05, 2014 at 07:52:31 AM, Yuan Yao wrote:
Add dma support for i2c. This function depend on DMA driver.
You can turn on it by write both the dmas and dma
On Thursday, March 06, 2014 at 06:02:03 AM, Yao Yuan wrote:
On Thu, March 06, 2014 at 12:44:14 PM, Marek Vasut wrote:
On Thursday, March 06, 2014 at 05:36:14 AM, Yao Yuan wrote:
On Thu, March 06, 2014 at 11:23:50 AM, Marek Vasut wrote:
On Wednesday, March 05, 2014 at 07:52:31 AM, Yuan
be compiled with CONFIG_RESET_CONTROLLER disabled.
Also, device_reset is annotated with __must_check. Drivers ignoring the
return value should use device_reset_optional instead.
Signed-off-by: Philipp Zabel p.za...@pengutronix.de
Nice.
Reviewed-by: Marek Vasut ma...@denx.de
Best regards,
Marek
On Tuesday, March 11, 2014 at 06:27:39 AM, Yao Yuan wrote:
On Thu, Mar 10, 2014 at 10:01:42 AM, Marek Vasut wrote:
On Thu, Mar 06, 2014 at 12:57:42PM +0100, Marek Vasut wrote:
On Thursday, March 06, 2014 at 06:02:03 AM, Yao Yuan wrote:
On Thu, March 06, 2014 at 12:44:14 PM, Marek Vasut
, the patch does not change the behaviour of this
driver on the affected platforms.
Signed-off-by: Lothar Waßmann l...@karo-electronics.de
Looks OK to me, thanks.
Reviewed-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux
-by: Alexandre Belloni alexandre.bell...@free-electrons.com
Why don't you remove the check entirely then ?
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org
On Tuesday, January 14, 2014 at 12:58:55 PM, Wolfram Sang wrote:
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.
Signed-off-by: Wolfram Sang w...@the-dreams.de
True that,
Acked-by: Marek Vasut ma...@denx.de
---
Should go via
On Thursday, March 13, 2014 at 02:47:56 AM, Yuan Yao wrote:
Add dma support for i2c. This function depend on DMA driver.
You can turn on it by write both the dmas and dma-name properties in dts
node.
Signed-off-by: Yuan Yao yao.y...@freescale.com
---
drivers/i2c/busses/i2c-imx.c | 354
, to fix the colors display, just get back to the default controller
behaviour.
Signed-off-by: Maxime Ripard maxime.rip...@free-electrons.com
Did you receive my latest email? Check M28EVK (imx28-m28evk.dts), it uses 18bit
LCD and works without this patch I think.
Best regards,
Marek Vasut
Dear Maxime Ripard,
Hi Marek,
Le 22/04/2013 11:16, Marek Vasut a écrit :
Dear Maxime Ripard,
The current code always registers as a 32 bits display, and uses the
hardware to drop the MSB of each color to abjust to the interface width
used by the panel.
This results on 18 bits
-directional communication.
It can't do full duplex. I tested it with master-slave communication (half-
duplex) and various SPI flashes.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo
chipidea usb otg support for
i.mx.
I gave up on tracking that mayhem.
Please post this question in the linux-usb list and add Peter Chen, the
folks from Pengutronix and Alexander Shishkin in Cc.
Good idea. Also please keep us in loop.
Best regards,
Marek Vasut
--
To unsubscribe from this list
-in.o:include/linux/input.h:389: more undefined references to
`input_event' follow
Signed-off-by: Randy Dunlap rdun...@infradead.org
Acked-by: Marek Vasut ma...@denx.de
Thanks!
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
in a deferred probe.
Signed-off-by: Wolfram Sang w...@the-dreams.de
Cc: Marek Vasut ma...@denx.de
Certainly makes sense,
Acked-by: Marek Vasut ma...@denx.de
Thanks!
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord
this regulator_unregister() above here?
[...]
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http
= rc5t583_regulator_remove,
};
static int __init rc5t583_regulator_init(void)
Next up, you might want to start flipping the regulator drivers to
module_platform_driver ;-)
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux
Dear Sachin Kamat,
devm_* simplifies the code.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Makes sense
Acked-by: Marek Vasut ma...@denx.de
---
This series is compile tested.
---
drivers/regulator/anatop-regulator.c |3 +--
1 file changed, 1 insertion(+), 2 deletions
Dear Sachin Kamat,
devm_* simplifies the code.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
Dear Sachin Kamat,
devm_* simplifies the code.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
Dear Sachin Kamat,
devm_* simplifies the code.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
Dear Hector Palacios,
Dear Marek,
On 07/19/2013 04:39 PM, Marek Vasut wrote:
Dear Hector Palacios,
Added write_raw function to manipulate the optional divider_by_two
through the scaling attribute out of the available scales.
Signed-off-by: Hector Palacios hector.palac
Dear Hector Palacios,
Dear Marek,
On 07/19/2013 04:30 PM, Marek Vasut wrote:
@@ -228,39 +230,12 @@ struct mxs_lradc {
#define LRADC_RESOLUTION 12
#define LRADC_SINGLE_SAMPLE_MASK ((1 LRADC_RESOLUTION) - 1)
-/*
- * Raw I/O operations
Dear Jonathan Cameron,
On 07/19/2013 05:22 PM, Hector Palacios wrote:
Dear Marek,
On 07/19/2013 06:17 PM, Marek Vasut wrote:
Here you have three entries per channel:
in_voltageX_raw- the sample raw value
in_voltageX_scale- the scale to multiply the raw value to get
Dear Hector Palacios,
Hi Marek,
On 07/19/2013 06:14 PM, Marek Vasut wrote:
Dear Hector Palacios,
Dear Marek,
On 07/19/2013 04:30 PM, Marek Vasut wrote:
@@ -228,39 +230,12 @@ struct mxs_lradc {
#define LRADC_RESOLUTION 12
#define
Hi Hector,
Hi Marek,
On 07/22/2013 09:42 AM, Marek Vasut wrote:
Dear Hector Palacios,
Hi Marek,
On 07/19/2013 06:14 PM, Marek Vasut wrote:
Dear Hector Palacios,
Dear Marek,
On 07/19/2013 04:30 PM, Marek Vasut wrote:
@@ -228,39 +230,12 @@ struct mxs_lradc
Dear Hector Palacios,
Added write_raw function to manipulate the optional divider_by_two
through the scaling attribute out of the available scales.
Signed-off-by: Hector Palacios hector.palac...@digi.com
---
Yep, looks nicer,
Reviewed-by: Marek Vasut ma...@denx.de
Best regards,
Marek
-scale_avail[i][s].integer = scale_uv;
+ }
+ }
+
/* Configure the hardware. */
mxs_lradc_hw_init(lradc);
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo
He's talking about different versions of the IP block, this is the same IP
block, just connected to different inputs.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info
the divider as required.
Signed-off-by: Robert Hodaszi robert.hoda...@digi.com
Acked-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
On Tuesday, June 10, 2014 at 03:41:35 PM, Robert Hodaszi wrote:
Commit c8231a9af8147f8a401fc55931ec44abfb937660 (iio: mxs-lradc: compute
temperature from channel 8 and 9) merged channel 8 and channel 9 to create
an IIO_TEMP channel. It changed the number of LRADC channels, which could
cause
for making the change:
Reviewed-by: Marek Vasut ma...@denx.de
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ
{
compatible = allwinner,sun4i-a10-spi;
reg = 0x01c17000 0x1000;
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
this applied ? I think
unification of code is always good.
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ
On Thursday, May 22, 2014 at 05:09:56 PM, LABBE Corentin wrote:
Do I have to repeat myself ? :)
Signed-off-by: LABBE Corentin clabbe.montj...@gmail.com
---
drivers/crypto/Kconfig| 49 ++
drivers/crypto/Makefile |1 +
drivers/crypto/sunxi-ss.c | 1476
.
+
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
drivers/crypto/sunxi-ss/ .
[...]
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
On Saturday, May 24, 2014 at 09:20:03 PM, Tomasz Figa wrote:
Hi Marek,
On 24.05.2014 13:21, Marek Vasut wrote:
On Thursday, May 22, 2014 at 05:09:54 PM, LABBE Corentin wrote:
Missing commit message. Please fix this and send a V2.
Signed-off-by: LABBE Corentin clabbe.montj
1 - 100 of 1712 matches
Mail list logo