On Fri, Apr 09, 2021 at 05:55:01PM -0700, Guru Das Srinagesh wrote:
> Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver.
>
> Signed-off-by: Guru Das Srinagesh
> ---
> .../devicetree/bindings/mfd/qcom,pm8008.yaml | 119
> +
> 1 file changed, 119
On Fri, Apr 09, 2021 at 03:40:21PM -0500, Alex Elder wrote:
> Add existing supported platform "qcom,sc7180-ipa" to the set of IPA
> compatible strings. Also add newly-supported "qcom,sdx55-ipa",
> "qcom,sc7280-ipa".
>
> Signed-off-by: Alex Elder
> ---
>
On Fri, Apr 09, 2021 at 11:43:21PM +0530, Radhey Shyam Pandey wrote:
> The axiethernet driver will now use dmaengine framework to communicate
> with dma controller IP instead of built-in dma programming sequence.
>
> To request dma transmit and receive channels the axiethernet driver uses
>
ed-off-by: Radhey Shyam Pandey
> ---
> Changes for v2:
> - New patch. Introduce xlnx,irq-delay property for low latency usecases
> ---
> Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Acked-by: Rob Herring
_dma.txt | 2 ++
> 1 file changed, 2 insertions(+)
>
Acked-by: Rob Herring
m-pm8xxx-rtc.yaml | 62
> ++
> 1 file changed, 62 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
>
Reviewed-by: Rob Herring
evicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring
/bindings/mfd/qcom-pm8xxx.yaml | 54 +++
> 2 files changed, 54 insertions(+), 100 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
>
Reviewed-by: Rob Herring
On Mon, Apr 12, 2021 at 12:19:30PM +0200, Marc Kleine-Budde wrote:
> On 4/9/21 3:40 PM, Aswath Govindraju wrote:
> > Add binding documentation for TI TCAN104x CAN transceivers.
> >
> > Signed-off-by: Aswath Govindraju
> > ---
> > .../bindings/phy/ti,tcan104x-can.yaml | 56
On Fri, Apr 09, 2021 at 07:10:53PM +0530, Aswath Govindraju wrote:
> From: Faiz Abbas
>
> Some transceivers need a configuration step (for example, pulling the
> standby or enable lines) for them to start sending messages. The
> transceiver can be implemented as a phy with the configuration done
On Fri, Apr 09, 2021 at 05:24:31PM +0530, Taniya Das wrote:
> The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic
> properties that are needed in a device tree. Add the LPASS clock IDs for
> LPASS PIL client to request for the clocks.
>
> Signed-off-by: Taniya Das
> ---
>
On Fri, Apr 09, 2021 at 02:13:37PM +0300, Claudiu Beznea wrote:
> Add RAM controller and RAM PHY controller DT bindings.
>
> Signed-off-by: Claudiu Beznea
> ---
> .../devicetree/bindings/arm/atmel-sysregs.txt | 15 ++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff
io-idx-num:
> +description: The number of the devices controlled by devapc
> +$ref: /schemas/types.yaml#/definitions/uint32
> +maxItems: 1
A uint32 is always 1 item, so drop. With that,
Reviewed-by: Rob Herring
> +
>interrupts:
> description: A single interrupt specifier
> maxItems: 1
> --
> 2.6.4
>
On Sun, 11 Apr 2021 15:10:03 +0200, Johan Jonker wrote:
> The compatible strings below are already in use in the Rockchip
> dtsi files, but were somehow never added to a document, so add
>
> "rockchip,rk3328-pwm"
>
> "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"
>
> "rockchip,rk3368-pwm",
On Sun, 11 Apr 2021 13:48:02 +0200, Giulio Benetti wrote:
> Update Documentation/devicetree/bindings/vendor-prefixes.yaml to
> include "hycon" as a vendor prefix for "Hycon Technology".
> Company website: https://www.hycontek.com/
>
> Signed-off-by: Giulio Benetti
> Reviewed-by: Jonathan
On Sun, Apr 11, 2021 at 01:48:03PM +0200, Giulio Benetti wrote:
> This adds device tree bindings for the Hycon HY46XX touchscreen series.
>
> Signed-off-by: Giulio Benetti
> ---
> V1->V2:
> As suggested by Rob Herring:
> * fixed $id: address
> * added "hycon,&qu
On Mon, 12 Apr 2021 11:39:24 +0200, Neil Armstrong wrote:
> Update the mediatek,dpi binding to use the graph schema.
>
> Signed-off-by: Neil Armstrong
> ---
> .../display/mediatek/mediatek,cec.yaml| 51 +++
> .../display/mediatek/mediatek,hdmi-ddc.yaml | 57
>
On Sun, 11 Apr 2021 17:26:55 +0800, Zhiyong Tao wrote:
> 1. This patch adds pinctrl file for mt8195.
> 2. This patch adds mt8195 compatible node in binding document.
>
> Signed-off-by: Zhiyong Tao
> ---
> .../bindings/pinctrl/pinctrl-mt8195.yaml | 152 +++
>
On Fri, 09 Apr 2021 23:43:20 +0530, Radhey Shyam Pandey wrote:
> Convert the bindings document for Xilinx AXI Ethernet Subsystem
> from txt to yaml. No changes to existing binding description.
>
> Signed-off-by: Radhey Shyam Pandey
> ---
> Pending: Fix below remaining dt_binding_check warning:
>
On Sun, 11 Apr 2021 13:48:03 +0200, Giulio Benetti wrote:
> This adds device tree bindings for the Hycon HY46XX touchscreen series.
>
> Signed-off-by: Giulio Benetti
> ---
> V1->V2:
> As suggested by Rob Herring:
> * fixed $id: address
> * added "hycon,&qu
On Mon, 12 Apr 2021 17:54:55 +0800, Billy Tsai wrote:
> This patch adds device bindings for aspeed pwm device which should be
> the sub-node of aspeed,ast2600-pwm-tach.
>
> Signed-off-by: Billy Tsai
> ---
> .../bindings/pwm/aspeed,ast2600-pwm.yaml | 47 +++
> 1 file
Linus,
Please pull. This has the fix for the OpenRisc regression Guenter
reported.
Rob
The following changes since commit b5a95bb1883e2bac1009cc88e65c71cff6f931e6:
dt-bindings: media: Use graph and video-interfaces schemas, round 2
(2021-03-01 11:30:21 -0600)
are available in the Git
On Wed, Apr 7, 2021 at 3:45 PM Ilya Lipnitskiy
wrote:
>
> On Tue, Apr 6, 2021 at 6:24 PM Saravana Kannan wrote:
> >
> > On Tue, Apr 6, 2021 at 6:10 PM Rob Herring wrote:
> > >
> > > On Tue, Apr 6, 2021 at 7:46 PM Saravana Kannan
> > > wrote:
>
On Fri, 09 Apr 2021 14:47:47 +0200, Mauro Carvalho Chehab wrote:
> Changeset 1ca9d1b1342d ("dt-bindings:iio:adc:motorola,cpcap-adc yaml
> conversion")
> renamed: Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
> to: Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml.
>
>
On Fri, 09 Apr 2021 14:47:46 +0200, Mauro Carvalho Chehab wrote:
> The iio-bindings.txt was converted into two files and merged
> at the dt-schema git tree at:
>
> https://github.com/devicetree-org/dt-schema
>
> Yet, some documents still refer to the old file. Fix their
> references, in
On Fri, 09 Apr 2021 14:47:45 +0200, Mauro Carvalho Chehab wrote:
> As documents have been renamed and moved around, their
> references will break, but this will be unnoticed, as the
> script which checks for it won't handle "../" references.
>
> So, replace them by the full patch.
>
>
On Fri, 09 Apr 2021 17:47:20 +0200, Jiri Prchal wrote:
> Added dt binding documentation.
>
> Signed-off-by: Jiri Prchal
> ---
> Documentation/devicetree/bindings/eeprom/at25.yaml | 12 ++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
My bot found errors running 'make
On Fri, Apr 09, 2021 at 10:55:19AM -0500, Bjorn Andersson wrote:
> On Thu 08 Apr 19:38 CDT 2021, Guru Das Srinagesh wrote:
>
> > Add a header file listing all of the IRQs that Qualcomm Technologies,
> > Inc. PM8008 supports. The constants defined in this file may be used in
> > the client device
sertion(+), 3 deletions(-)
>
Reviewed-by: Rob Herring
On Thu, 08 Apr 2021 22:34:56 +0530, Manivannan Sadhasivam wrote:
> Add devicetree binding for SDX55 remoteproc.
>
> Cc: Rob Herring
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Manivannan Sadhasivam
> ---
> Documentation/devicetree/bindings/remoteproc/qcom,adsp.t
On Thu, 08 Apr 2021 22:34:54 +0530, Manivannan Sadhasivam wrote:
> Add devicetree binding for Thundercomm T55 Dev kit based on SDX55.
>
> Cc: Rob Herring
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Manivannan Sadhasivam
> ---
> Documentation/devicetree/bindings/arm
On Thu, 08 Apr 2021 22:34:52 +0530, Manivannan Sadhasivam wrote:
> Add devicetree binding for Telit FN980 TLB board based on SDX55.
>
> Cc: Rob Herring
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Manivannan Sadhasivam
> ---
> Documentation/devicetree/bindings/arm
On Thu, 08 Apr 2021 22:34:48 +0530, Manivannan Sadhasivam wrote:
> Add devicetree compatible for SCM present in SDX55 platform.
>
> Cc: Rob Herring
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Manivannan Sadhasivam
> ---
> Documentation/devicetree/bindings/firmware/qc
On Thu, 08 Apr 2021 16:21:14 +, Caleb Connolly wrote:
> Document the iommus property for QCOM Geni SE.
>
> Signed-off-by: Caleb Connolly
> ---
> Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
Acked-by: Rob Herring
On Thu, Apr 08, 2021 at 05:01:09PM +0530, satya priya wrote:
> Convert qcom pm8941 power key binding from .txt to .yaml format.
>
> Signed-off-by: satya priya
> ---
> Changes in V2:
> - Fixed bot errors, took reference from input.yaml for "linux,code"
> - Added one complete example for
off-by: David Collins
> Signed-off-by: satya priya
> ---
> Chnages in V2:
> - Moved this patch before the conversion patches.
>
> Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 2 ++
> 1 file changed, 2 insertions(+)
>
Acked-by: Rob Herring
On Thu, Apr 08, 2021 at 07:30:21PM +0800, Shawn Guo wrote:
> Add optional brcm,ccode-map property to support translation from ISO3166
> country code to brcmfmac firmware country code and revision.
>
> Signed-off-by: Shawn Guo
> ---
> .../devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt |
Signed-off-by: Chunfeng Yun
> ---
> .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 13 -
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
Reviewed-by: Rob Herring
On Thu, Apr 08, 2021 at 09:52:17AM +0800, Steven Lee wrote:
> AST2600-A2 EVB provides the reference design for enabling SD bus power
> and toggling SD bus signal voltage by GPIO pins.
> Add the definition and example for power-gpio and power-switch-gpio
> properties.
>
> In the reference design,
On Wed, Apr 07, 2021 at 01:07:23PM -0700, Badhri Jagan Sridharan wrote:
> To allow slow charger loops to comply to pSnkStby requirement,
> this patch introduces slow-charger-loop which when set makes
> the port request PD_P_SNK_STDBY_MW upon entering SNK_DISCOVERY
> (instead of 3A or the 1.5A
On Wed, Apr 07, 2021 at 11:50:38AM -0700, Manish Varma wrote:
> I2C devices currently are named dynamically using
> - convention, unless they are instantiated
> through ACPI.
>
> This means the device name may vary for the same device across different
> systems, infact even on the same system if
On Wed, Apr 07, 2021 at 11:28:02AM +0800, Flora Fu wrote:
> Document the apusys bindings.
>
> Signed-off-by: Flora Fu
> ---
> .../arm/mediatek/mediatek,apusys.yaml | 56 +++
> 1 file changed, 56 insertions(+)
> create mode 100644
>
On Wed, Apr 07, 2021 at 11:28:01AM +0800, Flora Fu wrote:
> Create MT8192 APU power domain bindings.
> Add top power domain id.
>
> Signed-off-by: Flora Fu
> ---
> include/dt-bindings/power/mt8192-apu-power.h | 11 +++
> 1 file changed, 11 insertions(+)
> create mode 100644
On Wed, 07 Apr 2021 11:27:59 +0800, Flora Fu wrote:
> Add clock bindings for APU on MT8192.
>
> Signed-off-by: Flora Fu
> ---
> include/dt-bindings/clock/mt8192-clk.h | 14 --
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
Acked-by: Rob Herring
"
>
> for pwm nodes to pwm-rockchip.yaml.
>
> Signed-off-by: Johan Jonker
> ---
> Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml | 11 +++
> 1 file changed, 11 insertions(+)
>
Reviewed-by: Rob Herring
On Tue, Apr 06, 2021 at 09:04:29PM +0200, Johan Jonker wrote:
> Hi,
>
> Question for Heiko:
> rv1108.dtsi and rk3328.dtsi have a undocumented "interrupts" property
> AFAICT without driver support.
> Please advise what to do with it.
>
>
> See build log:
>
On Tue, Apr 06, 2021 at 05:50:52PM +0200, Johan Jonker wrote:
> Current dts files with 'pwm' nodes are manually verified.
> In order to automate this process pwm-rockchip.txt
> has to be converted to yaml.
>
> Signed-off-by: Johan Jonker
> ---
> .../devicetree/bindings/pwm/pwm-rockchip.txt
On Tue, Apr 06, 2021 at 07:33:03PM +0800, Clark Wang wrote:
> Add i2c bus dma mode configuration example.
>
> Signed-off-by: Clark Wang
> ---
> V2 changes:
> - New patch added in V2
> ---
> .../devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 12
> 1 file changed, 12
On Fri, Apr 9, 2021 at 7:48 AM Mauro Carvalho Chehab
wrote:
>
> As documents have been renamed and moved around, their
> references will break, but this will be unnoticed, as the
> script which checks for it won't handle "../" references.
>
> So, replace them by the full patch.
>
> Signed-off-by:
On Fri, Apr 9, 2021 at 7:48 AM Mauro Carvalho Chehab
wrote:
>
> The iio-bindings.txt was converted into two files and merged
> at the dt-schema git tree at:
>
> https://github.com/devicetree-org/dt-schema
>
> Yet, some documents still refer to the old file. Fix their
> references, in
; .../bindings/mmc/brcm,sdhci-iproc.txt | 37 ---
> 2 files changed, 63 insertions(+), 37 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/mmc/brcm,iproc-sdhci.yaml
> delete mode 100644 Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt
>
Reviewed-by: Rob Herring
On Tue, Apr 06, 2021 at 09:21:21AM +0200, Erwan Le Ray wrote:
> Add two optional DT properties, to configure RX and TX fifo threshold:
> - st,rx-fifo-threshold-bytes
> - st,tx-fifo-threshold-bytes
>
> This patch depends on patch ("dt-bindings: serial: Add rx-tx-swap to
> stm32-usart").
>
>
sung_uart.yaml | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
Otherwise,
Reviewed-by: Rob Herring
On Mon, Apr 05, 2021 at 06:51:03PM +0300, Eugen Hristev wrote:
> Add bindings for the microchip xisc, a driver based on atmel-isc.
> It shares common code with atmel-isc, but the xisc is the next generation
> ISC which is present on sama7g5 product.
> It has an enhanced pipeline, additional
On Wed, Mar 31, 2021 at 9:16 AM Rob Herring wrote:
>
> On Wed, Mar 10, 2021 at 7:33 AM Argus Lin wrote:
> >
> > This patch adds MediaTek MT6359 ASoC accdet jack document.
>
> Seems this never made it to the DT list so no checks ran. It's got all
> sorts of errors:
etree/bindings/fpga/fpga-region.txt | 14 ++
> 1 file changed, 14 insertions(+)
>
Acked-by: Rob Herring
On Fri, 02 Apr 2021 14:50:47 +0530, Nava kishore Manne wrote:
> Add new power domain for PL region.
>
> Signed-off-by: Nava kishore Manne
> ---
> include/dt-bindings/power/xlnx-zynqmp-power.h | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring
On Fri, Apr 02, 2021 at 02:39:31PM +0530, Nava kishore Manne wrote:
> Add "fpga-config-from-dmabuf" property to allow the bitstream
> configuration from pre-allocated dma-buffer.
>
> Signed-off-by: Nava kishore Manne
> ---
> Documentation/devicetree/bindings/fpga/fpga-region.txt | 2 ++
> 1
On Thu, 08 Apr 2021 17:38:30 -0700, Guru Das Srinagesh wrote:
> Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver.
>
> Signed-off-by: Guru Das Srinagesh
> ---
> .../devicetree/bindings/mfd/qcom,pm8008.yaml | 120
> +
> 1 file changed, 120
On Fri, Apr 9, 2021 at 4:07 AM Joakim Zhang wrote:
>
> From: Fugang Duan
>
> Currently, of_get_mac_address supports NVMEM, some platforms
What's of_get_mac_address? This is a binding patch. Don't mix Linux
things in it.
> MAC address that read from NVMEM efuse requires to swap bytes
> order,
ng
> ---
> V5:
> - Fix a typo of the parameter given to function dw_pcie_setup_rc()
>
> drivers/pci/controller/dwc/pci-layerscape.c | 382 ++-
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 381 insertions(+), 2 deletions(-)
Reviewed-by: Rob Herring
On Thu, Apr 8, 2021 at 3:45 PM wrote:
>
> From: Frank Rowand
>
> The Devicetree standard specifies an 8 byte alignment of the FDT.
> Code in libfdt expects this alignment for an FDT image in memory.
> kmemdup() returns 4 byte alignment on openrisc. Replace kmemdup()
> with kmalloc(), align
On Thu, Apr 01, 2021 at 06:05:45PM +0530, satya priya wrote:
> Convert Qualcomm PMIC GPIO bindings from .txt to .yaml format.
>
> Signed-off-by: satya priya
> ---
> Changes in V3:
> - As per Rob's comments fixed bot erros.
> - Moved this patch to end of the series so that other patches are not
On Thu, Apr 01, 2021 at 02:38:02PM +0800, Nina Wu wrote:
> From: Nina Wu
Every change is an 'update'. Perhaps mention mt8192 in the subject.
>
> To support newer hardware architecture of devapc,
> update device tree bindings.
>
> Signed-off-by: Nina Wu
> ---
>
On Thu, Apr 08, 2021 at 08:28:08PM +0800, Leizhen (ThunderTown) wrote:
>
>
> On 2021/4/7 10:04, Leizhen (ThunderTown) wrote:
> >
> >
> > On 2021/4/2 4:20, Rob Herring wrote:
> >> On Wed, Mar 31, 2021 at 05:16:16PM +0800, Zhen Lei wrote:
> >>
On Sun, Apr 04, 2021 at 06:55:01PM +0300, Dmitry Osipenko wrote:
> Convert Tegra20 External Memory Controller binding to schema.
>
> Signed-off-by: Dmitry Osipenko
> ---
> .../memory-controllers/nvidia,tegra20-emc.txt | 130
> .../nvidia,tegra20-emc.yaml | 303
tions(+)
> create mode 100644
> Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
>
Reviewed-by: Rob Herring
On Wed, Apr 07, 2021 at 07:49:08PM +0200, Giulio Benetti wrote:
> This adds device tree bindings for the Hycon HY46XX touchscreen series.
>
> Signed-off-by: Giulio Benetti
> ---
> V1->V2:
> As suggested by Rob Herring:
> * fixed $id: address
> * added "hycon,&qu
io Benetti
> Reviewed-by: Jonathan Neuschäfer
> ---
> Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
Acked-by: Rob Herring
On Tue, Apr 06, 2021 at 08:53:30PM -0400, Liam Beguin wrote:
> From: Liam Beguin
>
> Document devicetree bindings for Texas Instruments' LMK04832.
> The LMK04208 is a high performance clock conditioner with superior clock
> jitter cleaning, generation, and distribution with JEDEC JESD204B
>
On Sun, Apr 4, 2021 at 12:20 PM Christophe Leroy
wrote:
>
> One user has expressed the need to both append and prepend some
> built-in parameters to the command line provided by the bootloader.
>
> Allthough it is a corner case, it is easy to implement so let's do it.
>
> When the user chooses to
On Fri, Apr 02, 2021 at 03:18:20PM +, Christophe Leroy wrote:
> This converts the architecture to GENERIC_CMDLINE.
>
> Signed-off-by: Christophe Leroy
> ---
> arch/x86/Kconfig| 45 ++---
> arch/x86/kernel/setup.c | 17 ++--
> 2 files
On Tue, Apr 06, 2021 at 10:38:36AM -0700, Daniel Walker wrote:
> On Fri, Apr 02, 2021 at 03:18:21PM +, Christophe Leroy wrote:
> > -config CMDLINE_BOOL
> > - bool "Built-in kernel command line"
> > - help
> > - For most systems, it is firmware or second stage bootloader that
> > -
On Thu, Apr 8, 2021 at 6:08 AM Mark Rutland wrote:
>
> On Wed, Apr 07, 2021 at 01:44:37PM +0100, Will Deacon wrote:
> > [Moving Mark to To: since I'd like his view on this]
> >
> > On Thu, Apr 01, 2021 at 02:45:21PM -0500, Rob Herring wrote:
> > > On Wed, Mar
On Thu, Apr 8, 2021 at 10:17 AM wrote:
>
> From: Frank Rowand
>
> The Devicetree standard specifies an 8 byte alignment of the FDT.
> Code in libfdt expects this alignment for an FDT image in memory.
> kmemdup() returns 4 byte alignment on openrisc. Replace kmemdup()
> with kmalloc(), align
On Thu, Apr 08, 2021 at 12:58:05PM -0400, Jim Quinlan wrote:
> On Thu, Apr 8, 2021 at 12:20 PM Rob Herring wrote:
> >
> > On Tue, Apr 06, 2021 at 02:25:49PM -0400, Jim Quinlan wrote:
> > > On Tue, Apr 6, 2021 at 1:32 PM Mark Brown wrote:
> > > >
> > &g
On Tue, Apr 06, 2021 at 05:47:08PM +0100, Mark Brown wrote:
> On Thu, Apr 01, 2021 at 05:21:42PM -0400, Jim Quinlan wrote:
> > Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
> > allows optional regulators to be attached and controlled by the PCIe RC
> > driver. That
On Tue, Apr 06, 2021 at 02:25:49PM -0400, Jim Quinlan wrote:
> On Tue, Apr 6, 2021 at 1:32 PM Mark Brown wrote:
> >
> > On Tue, Apr 06, 2021 at 01:26:51PM -0400, Jim Quinlan wrote:
> > > On Tue, Apr 6, 2021 at 12:47 PM Mark Brown wrote:
> >
> > > > No great problem with having these in the
ned-off-by: Zev Weiss
> ---
> .../devicetree/bindings/serial/8250.yaml | 27 ---
> 1 file changed, 24 insertions(+), 3 deletions(-)
>
Reviewed-by: Rob Herring
gt;
> Signed-off-by: Zev Weiss
> Reviewed-by: Joel Stanley
> ---
> Documentation/devicetree/bindings/serial/8250.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring
; create mode 100644
> Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
>
Reviewed-by: Rob Herring
; drivers/pci/controller/dwc/pcie-fu740.c | 308
> 3 files changed, 318 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pcie-fu740.c
Reviewed-by: Rob Herring
> Signed-off-by: Matti Vaittinen
> ---
> v5 onwards:
> - No changes
> v4:
> - Fixed the description indentiation
> ---
> .../bindings/regulator/rohm,bd9576-regulator.yaml | 6 ++
> 1 file changed, 6 insertions(+)
>
Reviewed-by: Rob Herring
On Mon, Apr 05, 2021 at 01:18:15PM -0700, Matthias Kaehlcke wrote:
> Code for platform_device_create() and of_platform_device_create() is
platform_device_create()?
> only generated if CONFIG_OF_ADDRESS=y. Add stubs to avoid unresolved
> symbols when CONFIG_OF_ADDRESS is not set.
>
>
On Mon, Apr 05, 2021 at 04:36:10PM +0530, Krishna Manikandan wrote:
> Add bindings for Snapdragon DisplayPort controller driver.
>
> Signed-off-by: Chandan Uddaraju
> Signed-off-by: Vara Reddy
> Signed-off-by: Tanmay Shah
> Signed-off-by: Kuogee Hsieh
> Signed-off-by: Krishna Manikandan
>
>
On Mon, Apr 05, 2021 at 04:36:08PM +0530, Krishna Manikandan wrote:
> Add YAML schema for the device tree bindings for DSI
>
> Signed-off-by: Krishna Manikandan
>
> Changes in v1:
> - Separate dsi controller bindings to a separate patch (Stephen Boyd)
> - Merge
On Wed, Apr 7, 2021 at 9:37 PM Bjorn Andersson
wrote:
>
> On Wed 07 Apr 10:37 CDT 2021, ska...@codeaurora.org wrote:
>
> > Hi Bjorn,
> >
> > On 2021-03-11 22:33, Bjorn Andersson wrote:
> > > On Thu 11 Mar 01:29 CST 2021, satya priya wrote:
> [..]
> > > > +patternProperties:
> > > > +
Modified the file to use "|" only when it is
> necessary (Sam Ravnborg)
>
> Changes in v3:
> - Corrected the license used (Rob Herring)
> - Added maxItems for properties (Rob Herring)
> - Dropped generic descriptions (Rob Herring)
> - Added ranges property (Rob
On Wed, Apr 7, 2021 at 6:24 PM wrote:
>
> > -Original Message-
> > From: Stephen Rothwell
> > Sent: Wednesday, April 7, 2021 6:28 AM
> >
> > Hi all,
> >
> > In commit
> >
> > f2ce9e97cf07 ("of: properly check for error returned by fdt_get_name()")
> >
> > Fixes tag
> >
> > Fixes:
On Tue, Mar 30, 2021 at 04:17:53PM -0700, Daniel Walker wrote:
> On Tue, Mar 30, 2021 at 02:49:13PM -0500, Rob Herring wrote:
> > On Tue, Mar 30, 2021 at 12:57 PM Daniel Walker wrote:
> > >
> > > It looks like there's some seepage of cmdline stuff into
> &g
On Wed, Apr 7, 2021 at 3:51 PM wrote:
>
> From: Frank Rowand
>
> The Devicetree standard specifies an 8 byte alignment of the FDT.
> Code in libfdt expects this alignment for an FDT image in memory.
> kmemdup() returns 4 byte alignment on openrisc. Replace kmemdup()
> with kmalloc(), align
On Wed, Apr 7, 2021 at 6:27 AM Michael Ellerman wrote:
>
> Youlin Song writes:
> > I wanted to build the fsl dts in my machine and found that
> > the dtb have not extra space,so uboot will cause about
> > FDT_ERR_NOSPACE issue.
How do we not have issues with arm and arm64 boards which don't
advent of such an abstraction, there is a need to replace the
> generic clock and regulator bindings used by such devices with a generic
> performance domains bindings.
>
> [0]
> https://www.usenix.org/conference/usenixsecurity17/technical-sessions/presentation/tang
>
> Link: https://lo
On Wed, Apr 7, 2021 at 12:57 PM Giulio Benetti
wrote:
>
> Hello Rob, All,
>
> On 4/6/21 3:24 PM, Rob Herring wrote:
> > On Fri, 02 Apr 2021 18:16:26 +0200, Giulio Benetti wrote:
> >> This adds device tree bindings for the Hycon HY46XX touchscreen series.
> >>
: Fabrizio Castro
> > Reviewed-by: Lad Prabhakar
> > Reviewed-by: Laurent Pinchart
> > Reviewed-by: Geert Uytterhoeven
> > Reviewed-by: Rob Herring
>
> Thanks for your patch!
>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindin
an abstraction, there is a need to replace the
> generic clock and regulator bindings used by such devices with a generic
> performance domains bindings.
>
> [0]
> https://www.usenix.org/conference/usenixsecurity17/technical-sessions/presentation/tang
>
> Link: https://lo
On Mon, Apr 05, 2021 at 11:57:07AM +0300, Nick Kossifidis wrote:
> This patch series adds kexec/kdump and crash kernel
> support on RISC-V. For testing the patches a patched
> version of kexec-tools is needed (still a work in
> progress) which can be found at:
>
>
On Thu, 01 Apr 2021 14:17:49 +0200, Mauro Carvalho Chehab wrote:
> Changeset b83db5b84900 ("docs: dt: Group DT docs into relevant sub-sections")
> renamed: Documentation/devicetree/writing-schema.rst
> to: Documentation/devicetree/bindings/writing-schema.rst.
>
> Update the cross-references
On Wed, 07 Apr 2021 11:28:03 +0800, Flora Fu wrote:
> Document the bindings for APU power domain on MediaTek SoC.
>
> Signed-off-by: Flora Fu
> ---
> .../soc/mediatek/mediatek,apu-pm.yaml | 146 ++
> 1 file changed, 146 insertions(+)
> create mode 100644
>
On Wed, Apr 07, 2021 at 12:18:38PM +0900, Nobuhiro Iwamatsu wrote:
> Add support to PCIe RC controller on Toshiba Visconti ARM SoCs.
> PCIe controller is based of Synopsys DesignWare PCIe core.
>
> Signed-off-by: Yuji Ishikawa
> Signed-off-by: Nobuhiro Iwamatsu
> ---
>
201 - 300 of 25285 matches
Mail list logo
