I believe you need to add the flag '-d ata' to the smartctl command in
order to see the smart status of a SATA device.
-Jesse
-
here it is:
-->
# smartctl -a /dev/sda
smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002
Hello,
After 33 days of uptime, I noticed something in my dmesg output.
The system is 4 x SATA2 disks connected to the onboard SATA2
controller. They are all part of a linux software raid 5 volume.
According to /proc/mdstat , all of the disks are still online (?).
Right now the system is still u
How did you create the ext3 filesystem?
Did you use the appropriate --stride option as noted here:
http://tldp.org/HOWTO/Software-RAID-HOWTO-5.html (#5.11)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info a
uld need a stride of 32.
On 7/18/07, Rui Santos <[EMAIL PROTECTED]> wrote:
koan wrote:
> How did you create the ext3 filesystem?
The chunk_size is at 256KB, ext3 block size is 4k. I believe the correct
option that should be passed trough to --stride is 64.
Am I correct ?
I've also t
It appears the kernel config did not make it through, here it is:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20.11
# Wed May 16 09:39:45 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS
Neil,
I ran the drives in RAID-0 as you suggested and noticed the same problem.
I also ran memtest86 over night but there were no errors.
I did notice this SIL3114 card doesn't play nice with the other
promise cards (or vice versa). I had to swap them arroudn in the PCI
slots for the system to
Hello,
I get a compilation failure from the patch:
CC net/core/stream.o
CC net/core/scm.o
CC net/core/gen_stats.o
CC net/core/gen_estimator.o
CC net/core/sysctl_net_core.o
CC net/core/dev.o
net/core/dev.c: In function 'netdev_run_todo':
net/core/dev.c:3155: er
What is the status of 2.6.20.10/11?
I have been using the 2.6.20.10-rc1 with great success, but now I see
2.6.20.10 has been release with only two patches, and no 2.6.20.11
with the 2.6.20.10-rc1 patchset?
I haven't seen much on the list about this..
Thanks, Jesse
-
To unsubscribe from this lis
70.082440427 seconds time elapsed ( +- 1.66% )
69.365401758 seconds time elapsed ( +- 0.80% )
Tested-by: Koan-Sin Tan
[1] git://linux-arm.org/linux-power.git capacity_awareness_v2_arm64_v1
[2] https://git.linaro.org/people/freedom.tan/linux-8173.git
v4.7-rc5-mt8173-capacity
9 matches
Mail list logo
