nstead
- Some other cosmetic fixes
v1 -> v2:
- Adapted the DT binding (led-max-microamp for each LED node)
- Removed underscores from node names in the example
- Use brightness_set_blocking to avoid workqueue
- Introduced LED_to_CMD macro to avoid switch statement
- Various other fixes
Florian Va
nstead
- Some other cosmetic fixes
v1 -> v2:
- Adapted the DT binding (led-max-microamp for each LED node)
- Removed underscores from node names in the example
- Use brightness_set_blocking to avoid workqueue
- Introduced LED_to_CMD macro to avoid switch statement
- Various other fixes
Florian Va
the current on the Iref pin, hence the onnn,led-iref-microamp property.
It is usually set using an external bias resistor, following
Iref = Vref/Rbias with Vref=0.6V.
Signed-off-by: Florian Vaussard <florian.vauss...@gmail.com>
Acked-by: Rob Herring <r...@kernel.org>
---
.../devicetree/b
the current on the Iref pin, hence the onnn,led-iref-microamp property.
It is usually set using an external bias resistor, following
Iref = Vref/Rbias with Vref=0.6V.
Signed-off-by: Florian Vaussard
Acked-by: Rob Herring
---
.../devicetree/bindings/leds/leds-ncp5623.txt | 60
) and a dedicated register (ILED), following the
relationship:
I = 2400*Iref/(31-ILED)
with Iref = Vref/Rbias, and Vref = 0.6V.
Signed-off-by: Florian Vaussard <florian.vauss...@gmail.com>
---
drivers/leds/Kconfig| 11 +++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp
) and a dedicated register (ILED), following the
relationship:
I = 2400*Iref/(31-ILED)
with Iref = Vref/Rbias, and Vref = 0.6V.
Signed-off-by: Florian Vaussard
---
drivers/leds/Kconfig| 11 +++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp5623.c | 228
The dual Cortex-A9 MPCore inside socfpga has a standard PMU unit for
each core mapped in the DAP memory space. Add support for it!
Tested with perf on a Cyclone 5 SoC DK.
Reported-by: Alberto Dassatti <alberto.dassa...@heig-vd.ch>
Signed-off-by: Florian Vaussard <florian.vauss...@h
The dual Cortex-A9 MPCore inside socfpga has a standard PMU unit for
each core mapped in the DAP memory space. Add support for it!
Tested with perf on a Cyclone 5 SoC DK.
Reported-by: Alberto Dassatti
Signed-off-by: Florian Vaussard
Tested-by: Alberto Dassatti
---
arch/arm/boot/dts
Hi,
These patches add suport for ARM Performance Monitor Units on Arria5 and
Cyclone5 SoCFPGA. This was tested on a Cyclone 5 SoC DK board.
Side note: the same change can be probably applied to Arria10 as well,
but we do not have the hardware here to test.
Regards,
Florian
Florian Vaussard (2
Hi,
These patches add suport for ARM Performance Monitor Units on Arria5 and
Cyclone5 SoCFPGA. This was tested on a Cyclone 5 SoC DK board.
Side note: the same change can be probably applied to Arria10 as well,
but we do not have the hardware here to test.
Regards,
Florian
Florian Vaussard (2
This makes it easier to reference the CPU nodes afterwards.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
arch/arm/boot/dts/socfpga.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpg
This makes it easier to reference the CPU nodes afterwards.
Signed-off-by: Florian Vaussard
---
arch/arm/boot/dts/socfpga.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 2c43c4d..478047e 100644
On 02/27/2017 05:45 PM, Dinh Nguyen wrote:
>
>
> On 02/24/2017 11:54 PM, Florian Vaussard wrote:
>> We get a bunch of warnings when compiling the SoCFPGA device trees with W=1.
>> This warnings happens because some nodes have a unit name but no 'reg'
>> property,
&g
On 02/27/2017 05:45 PM, Dinh Nguyen wrote:
>
>
> On 02/24/2017 11:54 PM, Florian Vaussard wrote:
>> We get a bunch of warnings when compiling the SoCFPGA device trees with W=1.
>> This warnings happens because some nodes have a unit name but no 'reg'
>> property,
&g
Memory nodes in Arria5, Cyclone5 and Arria10 do not have a unit name.
This will trigger several warnings like this one (when compiled with
W=1):
Node /memory has a reg or ranges property, but no unit name
Add the corresponding unit name to each node.
Signed-off-by: Florian Vaussard
leton.dtsi is useless and will produce the following
warning when compiled with W=1:
Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
arch/arm/boot/dts/socfpga.dtsi | 1 -
arch/arm/boot/dts/socfpga_arria
name to each node.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
arch/arm/boot/dts/socfpga.dtsi | 38 ++--
arch/arm/boot/dts/socfpga_arria10.dtsi | 46 +-
2 files changed, 42 insertions(+), 42 deletions(-)
diff
Memory nodes in Arria5, Cyclone5 and Arria10 do not have a unit name.
This will trigger several warnings like this one (when compiled with
W=1):
Node /memory has a reg or ranges property, but no unit name
Add the corresponding unit name to each node.
Signed-off-by: Florian Vaussard
---
arch
leton.dtsi is useless and will produce the following
warning when compiled with W=1:
Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Florian Vaussard
---
arch/arm/boot/dts/socfpga.dtsi | 1 -
arch/arm/boot/dts/socfpga_arria10.dtsi | 1 -
2 files changed, 2
name to each node.
Signed-off-by: Florian Vaussard
---
arch/arm/boot/dts/socfpga.dtsi | 38 ++--
arch/arm/boot/dts/socfpga_arria10.dtsi | 46 +-
2 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts
/usbphy@0 has a unit name, but no reg property
Remove the superfluous unit names.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
arch/arm/boot/dts/socfpga.dtsi | 4 ++--
arch/arm/boot/dts/socfpga_arria10.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 del
not derive from the node
name and will stay the same after this patch.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
arch/arm/boot/dts/socfpga_cyclone5_socrates.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/bo
/usbphy@0 has a unit name, but no reg property
Remove the superfluous unit names.
Signed-off-by: Florian Vaussard
---
arch/arm/boot/dts/socfpga.dtsi | 4 ++--
arch/arm/boot/dts/socfpga_arria10.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts
not derive from the node
name and will stay the same after this patch.
Signed-off-by: Florian Vaussard
---
arch/arm/boot/dts/socfpga_cyclone5_socrates.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
b/arch/arm/boot/dts
tested on a Cyclone5 SoC DK, thus covering some of the
changes dones by patches 1 -> 3 + 6.
Regards,
Florian
Florian Vaussard (6):
ARM: dts: socfpga: Add unit name to clock nodes
ARM: dts: socfpga: Add unit name to memory nodes
ARM: dts: socfpga: Remove unneeded unit names
ARM:
tested on a Cyclone5 SoC DK, thus covering some of the
changes dones by patches 1 -> 3 + 6.
Regards,
Florian
Florian Vaussard (6):
ARM: dts: socfpga: Add unit name to clock nodes
ARM: dts: socfpga: Add unit name to memory nodes
ARM: dts: socfpga: Remove unneeded unit names
ARM:
/stmpe811@41/stmpe_touchscreen has a reg or ranges
property, but no unit name
Remove the superfluous reg property.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/bo
/stmpe811@41/stmpe_touchscreen has a reg or ranges
property, but no unit name
Remove the superfluous reg property.
Signed-off-by: Florian Vaussard
---
arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
b/arch
Using defines makes it easier to read interrupt descriptors. Apply to
both regular and GIC interrupts.
This patch was tested by comparing all the original and the new SocFPGA
DTBs. They are binary identical.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
arch/arm/bo
Using defines makes it easier to read interrupt descriptors. Apply to
both regular and GIC interrupts.
This patch was tested by comparing all the original and the new SocFPGA
DTBs. They are binary identical.
Signed-off-by: Florian Vaussard
---
arch/arm/boot/dts/socfpga.dtsi
Hi Maxime,
On 01/26/2017 10:05 AM, Maxime Ripard wrote:
> Hi,
>
> Here is a new attempt at getting the MMC controllers running, following the
> work done by Andre.
>
> This has been tested on a board with one SDIO device (a Marvell WiFi chip)
> and a Kingston eMMC with 1.8V IOs.
>
> For SDIO,
Hi Maxime,
On 01/26/2017 10:06 AM, Maxime Ripard wrote:
> The eMMC controller seem to have a maximum frequency of 200MHz, while the
> regular MMC controllers are capped at 150MHz.
>
> Since older SoCs cannot go that high, we cannot change the default maximum
> frequency, but fortunately for us
Hi Maxime,
On 01/26/2017 10:05 AM, Maxime Ripard wrote:
> Hi,
>
> Here is a new attempt at getting the MMC controllers running, following the
> work done by Andre.
>
> This has been tested on a board with one SDIO device (a Marvell WiFi chip)
> and a Kingston eMMC with 1.8V IOs.
>
> For SDIO,
Hi Maxime,
On 01/26/2017 10:06 AM, Maxime Ripard wrote:
> The eMMC controller seem to have a maximum frequency of 200MHz, while the
> regular MMC controllers are capped at 150MHz.
>
> Since older SoCs cannot go that high, we cannot change the default maximum
> frequency, but fortunately for us
Hello Dan,
Le 29. 11. 16 à 18:10, Dan Murphy a écrit :
> Florian
>
> On 11/29/2016 10:59 AM, Florian Vaussard wrote:
>> Hello,
>>
>> This series fixes similar misues of the regmap_update_bits() API found
>> inside the drv2665.c and drv2667.c drivers. More detai
Hello Dan,
Le 29. 11. 16 à 18:10, Dan Murphy a écrit :
> Florian
>
> On 11/29/2016 10:59 AM, Florian Vaussard wrote:
>> Hello,
>>
>> This series fixes similar misues of the regmap_update_bits() API found
>> inside the drv2665.c and drv2667.c drivers. More detai
d,
as I do not have this piece of hardware. Testers are welcome!
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
sound/soc/codecs/cs42l56.c | 12
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56
d,
as I do not have this piece of hardware. Testers are welcome!
Signed-off-by: Florian Vaussard
---
sound/soc/codecs/cs42l56.c | 12
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c
index 3e2c046..cb6ca85 100644
--- a
have this
piece of hardware. Testers are welcome!
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/pwm/pwm-pca9685.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 117fccf..6b9ff6c 100644
have this
piece of hardware. Testers are welcome!
Signed-off-by: Florian Vaussard
---
drivers/pwm/pwm-pca9685.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 117fccf..6b9ff6c 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b
his
change is untested, as I do not have this piece of hardware. Testers
are welcome!
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/input/misc/drv2665.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/input/misc/drv2665.c b/dr
ime. Please note that
this change is untested, as I do not have this piece of hardware.
Testers are welcome!
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/input/misc/drv2667.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/misc/drv2667.
his
change is untested, as I do not have this piece of hardware. Testers
are welcome!
Signed-off-by: Florian Vaussard
---
drivers/input/misc/drv2665.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/input/misc/drv2665.c b/drivers/input/misc/drv2665.c
index ef9bc1
ime. Please note that
this change is untested, as I do not have this piece of hardware.
Testers are welcome!
Signed-off-by: Florian Vaussard
---
drivers/input/misc/drv2667.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/misc/drv2667.c b/drivers/input/misc/drv2667.c
index
() are clearly wrong in the current
code and the fix seems obvious. Any tests are warmly welcome.
Best regards,
Florian
Florian Vaussard (2):
Input: drv2665: Fix misuse of regmap_update_bits
Input: drv2667: Fix misuse of regmap_update_bits
drivers/input/misc/drv2665.c | 5 +++--
drivers/input/misc
() are clearly wrong in the current
code and the fix seems obvious. Any tests are warmly welcome.
Best regards,
Florian
Florian Vaussard (2):
Input: drv2665: Fix misuse of regmap_update_bits
Input: drv2667: Fix misuse of regmap_update_bits
drivers/input/misc/drv2665.c | 5 +++--
drivers/input/misc
Replying to my self after thinking twice...
Le 29. 09. 16 à 18:18, Florian Vaussard a écrit :
> Hi Jacek,
>
> Thank you for your comments!
>
> Le 18. 09. 16 à 20:20, Jacek Anaszewski a écrit :
>> Hi Florian,
>>
>> Thanks for the updated patch set. I have few co
Replying to my self after thinking twice...
Le 29. 09. 16 à 18:18, Florian Vaussard a écrit :
> Hi Jacek,
>
> Thank you for your comments!
>
> Le 18. 09. 16 à 20:20, Jacek Anaszewski a écrit :
>> Hi Florian,
>>
>> Thanks for the updated patch set. I have few co
Hi Jacek,
Thank you for your comments!
Le 18. 09. 16 à 20:20, Jacek Anaszewski a écrit :
> Hi Florian,
>
> Thanks for the updated patch set. I have few comments below.
>
> On 09/16/2016 01:34 PM, Florian Vaussard wrote:
>> The NCP5623 is a 3-channel LED driver from On Sem
Hi Jacek,
Thank you for your comments!
Le 18. 09. 16 à 20:20, Jacek Anaszewski a écrit :
> Hi Florian,
>
> Thanks for the updated patch set. I have few comments below.
>
> On 09/16/2016 01:34 PM, Florian Vaussard wrote:
>> The NCP5623 is a 3-channel LED driver from On Sem
Hello Jacek,
Le 24. 09. 16 à 21:06, Jacek Anaszewski a écrit :
> On 09/24/2016 01:58 PM, Pavel Machek wrote:
>> Hi!
>>
>>> +Example
>>> +===
>>> +
>>> +led1: ncp5623@38 {
>>> +#address-cells = <1>;
>>> +#size-cells = <0>;
>>> +compatible = "onnn,ncp5623";
>>> +reg = <0x38>;
Hello Jacek,
Le 24. 09. 16 à 21:06, Jacek Anaszewski a écrit :
> On 09/24/2016 01:58 PM, Pavel Machek wrote:
>> Hi!
>>
>>> +Example
>>> +===
>>> +
>>> +led1: ncp5623@38 {
>>> +#address-cells = <1>;
>>> +#size-cells = <0>;
>>> +compatible = "onnn,ncp5623";
>>> +reg = <0x38>;
Hi Pavel,
Le 24. 09. 16 à 13:58, Pavel Machek a écrit :
> Hi!
>
>> +Example
>> +===
>> +
>> +led1: ncp5623@38 {
>> +#address-cells = <1>;
>> +#size-cells = <0>;
>> +compatible = "onnn,ncp5623";
>> +reg = <0x38>;
>> +onnn,led-iref-microamp = <10>;
>> +
>> +led1r@0 {
>>
Hi Pavel,
Le 24. 09. 16 à 13:58, Pavel Machek a écrit :
> Hi!
>
>> +Example
>> +===
>> +
>> +led1: ncp5623@38 {
>> +#address-cells = <1>;
>> +#size-cells = <0>;
>> +compatible = "onnn,ncp5623";
>> +reg = <0x38>;
>> +onnn,led-iref-microamp = <10>;
>> +
>> +led1r@0 {
>>
the current on the Iref pin, hence the onnn,led-iref-microamp property.
It is usually set using an external bias resistor, following
Iref = Vref/Rbias with Vref=0.6V.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
.../devicetree/bindings/leds/leds-ncp5623.txt
v1 -> v2:
- Adapted the DT binding (led-max-microamp for each LED node)
- Removed underscores from node names in the example
- Use brightness_set_blocking to avoid workqueue
- Introduced LED_to_CMD macro to avoid switch statement
- Various other fixes
Florian Vaussard (2):
leds: ncp5623: Add
the current on the Iref pin, hence the onnn,led-iref-microamp property.
It is usually set using an external bias resistor, following
Iref = Vref/Rbias with Vref=0.6V.
Signed-off-by: Florian Vaussard
---
.../devicetree/bindings/leds/leds-ncp5623.txt | 60 ++
1 file changed
v1 -> v2:
- Adapted the DT binding (led-max-microamp for each LED node)
- Removed underscores from node names in the example
- Use brightness_set_blocking to avoid workqueue
- Introduced LED_to_CMD macro to avoid switch statement
- Various other fixes
Florian Vaussard (2):
leds: ncp5623: Add
) and a dedicated register (ILED), following the
relationship:
I = 2400*Iref/(31-ILED)
with Iref = Vref/Rbias, and Vref = 0.6V.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/leds/Kconfig| 11 +++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp
) and a dedicated register (ILED), following the
relationship:
I = 2400*Iref/(31-ILED)
with Iref = Vref/Rbias, and Vref = 0.6V.
Signed-off-by: Florian Vaussard
---
drivers/leds/Kconfig| 11 +++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp5623.c | 234
On 07/03/2016 12:56 PM, Jonathan Cameron wrote:
> On 30/06/16 09:09, Florian Vaussard wrote:
>>
>>
>> Le 30. 06. 16 à 09:46, Peter Rosin a écrit :
>>>
>>>
>>> On June 30, 2016 9:34:50 AM GMT+02:00, Florian Vaussard
>>> <florian.v
On 07/03/2016 12:56 PM, Jonathan Cameron wrote:
> On 30/06/16 09:09, Florian Vaussard wrote:
>>
>>
>> Le 30. 06. 16 à 09:46, Peter Rosin a écrit :
>>>
>>>
>>> On June 30, 2016 9:34:50 AM GMT+02:00, Florian Vaussard
>>> wrote:
>>&
Hi Jonathan,
On 07/03/2016 12:41 PM, Jonathan Cameron wrote:
> On 30/06/16 08:43, Florian Vaussard wrote:
>> Add the device tree documentation for all the supported parts. Mandatory
>> binding is the compatible string and the slave I2C address.
>>
>> Optional proper
Hi Jonathan,
On 07/03/2016 12:41 PM, Jonathan Cameron wrote:
> On 30/06/16 08:43, Florian Vaussard wrote:
>> Add the device tree documentation for all the supported parts. Mandatory
>> binding is the compatible string and the slave I2C address.
>>
>> Optional proper
Le 30. 06. 16 à 09:46, Peter Rosin a écrit :
>
>
> On June 30, 2016 9:34:50 AM GMT+02:00, Florian Vaussard
> <florian.vauss...@gmail.com> wrote:
>> This patch adds the necessary device tree binding to allow DT probing
>> of
>> currently supported parts.
&
Le 30. 06. 16 à 09:46, Peter Rosin a écrit :
>
>
> On June 30, 2016 9:34:50 AM GMT+02:00, Florian Vaussard
> wrote:
>> This patch adds the necessary device tree binding to allow DT probing
>> of
>> currently supported parts.
>>
>> Signed-off-by: Fl
ed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
.../devicetree/bindings/iio/adc/max1363.txt| 63 ++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/max1363.txt
diff --git a/Documentation/devicetree/bind
by Jonathan
- Added DT maintainer's Ack
- Fixed handling of data pointer in struct of_device_id
Florian Vaussard (2):
iio: adc: max1363: Add device tree binding documentation
iio: adc: max1363: Add device tree binding
.../devicetree/bindings/iio/adc/max1363.txt| 63
This patch adds the necessary device tree binding to allow DT probing of
currently supported parts.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/iio/adc/max1363.c | 61 ++-
1 file changed, 60 insertions(+), 1 de
Add the device tree documentation for all the supported parts. Mandatory
binding is the compatible string and the slave I2C address.
Optional properties can be used to specify the Vcc / Vref regulators, as
well as the IRQ line if available.
Acked-by: Rob Herring
Signed-off-by: Florian Vaussard
by Jonathan
- Added DT maintainer's Ack
- Fixed handling of data pointer in struct of_device_id
Florian Vaussard (2):
iio: adc: max1363: Add device tree binding documentation
iio: adc: max1363: Add device tree binding
.../devicetree/bindings/iio/adc/max1363.txt| 63
This patch adds the necessary device tree binding to allow DT probing of
currently supported parts.
Signed-off-by: Florian Vaussard
---
drivers/iio/adc/max1363.c | 61 ++-
1 file changed, 60 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/adc
Add the device tree documentation for all the supported parts. Apart the
compatible string and standard I2C binding, no other binding is currently
needed.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
.../devicetree/bindings/i2c/trivial-devices.txt
Add the device tree documentation for all the supported parts. Apart the
compatible string and standard I2C binding, no other binding is currently
needed.
Signed-off-by: Florian Vaussard
---
.../devicetree/bindings/i2c/trivial-devices.txt| 64 ++
1 file changed, 64
to mcp4531_of_match
- New patch to fix typo in Kconfig
Florian Vaussard (4):
iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x
and MCP466x
iio: potentiometer: mcp4531: Add device tree binding documentation
iio: potentiometer: mcp4531: Add device tree binding
iio
memory is used to set the wiper.
Acked-by: Peter Rosin <p...@axentia.se>
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/iio/potentiometer/Kconfig | 6 ++--
drivers/iio/potentiometer/mcp4531.c | 72 +
2 files changed, 7
This patch adds the necessary device tree binding to allow DT probing of
currently supported parts.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/iio/potentiometer/mcp4531.c | 87 -
1 file changed, 86 insertions(+), 1 de
Fix s/potentiomenter/potentiometer/.
Suggested-by: Peter Meerwald-Stadler <pme...@pmeerw.net>
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/iio/potentiometer/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/p
to mcp4531_of_match
- New patch to fix typo in Kconfig
Florian Vaussard (4):
iio: potentiometer: mcp4531: Add support for MCP454x, MCP456x, MCP464x
and MCP466x
iio: potentiometer: mcp4531: Add device tree binding documentation
iio: potentiometer: mcp4531: Add device tree binding
iio
memory is used to set the wiper.
Acked-by: Peter Rosin
Signed-off-by: Florian Vaussard
---
drivers/iio/potentiometer/Kconfig | 6 ++--
drivers/iio/potentiometer/mcp4531.c | 72 +
2 files changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/iio
This patch adds the necessary device tree binding to allow DT probing of
currently supported parts.
Signed-off-by: Florian Vaussard
---
drivers/iio/potentiometer/mcp4531.c | 87 -
1 file changed, 86 insertions(+), 1 deletion(-)
diff --git a/drivers/iio
Fix s/potentiomenter/potentiometer/.
Suggested-by: Peter Meerwald-Stadler
Signed-off-by: Florian Vaussard
---
drivers/iio/potentiometer/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/potentiometer/Kconfig
b/drivers/iio/potentiometer/Kconfig
index
Le 27. 06. 16 à 10:33, Jacek Anaszewski a écrit :
> On 06/27/2016 10:30 AM, Florian Vaussard wrote:
>> Hi Jacek,
>>
>> Le 27. 06. 16 à 10:11, Jacek Anaszewski a écrit :
>>> Hi Florian,
>>>
>>> On 06/27/2016 09:03 AM, Florian Vaussard w
Le 27. 06. 16 à 10:33, Jacek Anaszewski a écrit :
> On 06/27/2016 10:30 AM, Florian Vaussard wrote:
>> Hi Jacek,
>>
>> Le 27. 06. 16 à 10:11, Jacek Anaszewski a écrit :
>>> Hi Florian,
>>>
>>> On 06/27/2016 09:03 AM, Florian Vaussard w
Hi Jacek,
Le 27. 06. 16 à 10:14, Jacek Anaszewski a écrit :
> Hi Florian,
>
> Thanks for the update. I have few comments below.
>
> On 06/27/2016 09:03 AM, Florian Vaussard wrote:
>> The NCP5623 is a 3-channel LED driver from On Semiconductor controlled
>> through I
Hi Jacek,
Le 27. 06. 16 à 10:14, Jacek Anaszewski a écrit :
> Hi Florian,
>
> Thanks for the update. I have few comments below.
>
> On 06/27/2016 09:03 AM, Florian Vaussard wrote:
>> The NCP5623 is a 3-channel LED driver from On Semiconductor controlled
>> through I
Hi Jacek,
Le 27. 06. 16 à 10:11, Jacek Anaszewski a écrit :
> Hi Florian,
>
> On 06/27/2016 09:03 AM, Florian Vaussard wrote:
>> Add device tree binding documentation for On Semiconductor NCP5623 I2C
>> LED driver. The driver can independently control the PWM of the 3
>&
Hi Jacek,
Le 27. 06. 16 à 10:11, Jacek Anaszewski a écrit :
> Hi Florian,
>
> On 06/27/2016 09:03 AM, Florian Vaussard wrote:
>> Add device tree binding documentation for On Semiconductor NCP5623 I2C
>> LED driver. The driver can independently control the PWM of the 3
>&
) and a dedicated register (ILED), following the
relationship:
I = 2400*Iref/(31-ILED)
with Iref = Vref/Rbias, and Vref = 0.6V.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
drivers/leds/Kconfig| 11 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp
) and a dedicated register (ILED), following the
relationship:
I = 2400*Iref/(31-ILED)
with Iref = Vref/Rbias, and Vref = 0.6V.
Signed-off-by: Florian Vaussard
---
drivers/leds/Kconfig| 11 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-ncp5623.c | 269
the current on the Iref pin, hence the onnn,led-iref-microamp property.
It is usually set using an external bias resistor, following
Iref = Vref/Rbias with Vref=0.6V.
Signed-off-by: Florian Vaussard <florian.vauss...@heig-vd.ch>
---
.../devicetree/bindings/leds/leds-ncp5623.txt
- Use brightness_set_blocking to avoid workqueue
- Introduced LED_to_CMD macro to avoid switch statement
- Various other fixes
Florian Vaussard (2):
leds: ncp5623: Add device tree binding documentation
leds: Add driver for NCP5623 3-channel I2C LED driver
.../devicetree/bindings/leds/leds-ncp5623
the current on the Iref pin, hence the onnn,led-iref-microamp property.
It is usually set using an external bias resistor, following
Iref = Vref/Rbias with Vref=0.6V.
Signed-off-by: Florian Vaussard
---
.../devicetree/bindings/leds/leds-ncp5623.txt | 60 ++
1 file changed
- Use brightness_set_blocking to avoid workqueue
- Introduced LED_to_CMD macro to avoid switch statement
- Various other fixes
Florian Vaussard (2):
leds: ncp5623: Add device tree binding documentation
leds: Add driver for NCP5623 3-channel I2C LED driver
.../devicetree/bindings/leds/leds-ncp5623
Hi Peter,
Le 27. 06. 16 à 00:12, Peter Rosin a écrit :
> Hi Florian,
>
> On 2016-06-26 22:22, Florian Vaussard wrote:
>> This patch adds the necessary device tree binding to allow DT probing of
>> currently supported parts.
>>
>> Signed-off-by: Florian Vaus
Hi Peter,
Le 27. 06. 16 à 00:12, Peter Rosin a écrit :
> Hi Florian,
>
> On 2016-06-26 22:22, Florian Vaussard wrote:
>> This patch adds the necessary device tree binding to allow DT probing of
>> currently supported parts.
>>
>> Signed-off-by: Florian
Hello Peter,
Le 26. 06. 16 à 23:38, Peter Rosin a écrit :
> On 2016-06-26 22:22, Florian Vaussard wrote:
>> Add the device tree documentation for all the supported parts. Apart the
>> compatible string and standard I2C binding, no other binding is currently
>> needed.
>>
Hi Pavel,
Le 26. 06. 16 à 23:49, Pavel Machek a écrit :
> Hi!
>
>>> +struct ncp5623_led {
>>> + bool active;
>>> + unsigned int led_no;
>>> + struct led_classdev ldev;
>>> + struct work_struct work;
>>> + struct ncp5623_priv *priv;
>>> +};
>>> +
>>> +struct ncp5623_priv {
>>> +
Hello Peter,
Le 26. 06. 16 à 23:38, Peter Rosin a écrit :
> On 2016-06-26 22:22, Florian Vaussard wrote:
>> Add the device tree documentation for all the supported parts. Apart the
>> compatible string and standard I2C binding, no other binding is currently
>> needed.
>>
Hi Pavel,
Le 26. 06. 16 à 23:49, Pavel Machek a écrit :
> Hi!
>
>>> +struct ncp5623_led {
>>> + bool active;
>>> + unsigned int led_no;
>>> + struct led_classdev ldev;
>>> + struct work_struct work;
>>> + struct ncp5623_priv *priv;
>>> +};
>>> +
>>> +struct ncp5623_priv {
>>> +
1 - 100 of 398 matches
Mail list logo
