On Thu, Jan 28, 2021 at 12:31:36PM +, Andre Przywara wrote:
> Mark Brown wrote:
> > It sounds like you're trying to register an IRQ chip with a somehow
> > bogus configuration?
> I patched the AXP MFD driver [1] to skip the regmap-irq creation when no
> interrupts DT property was found, but
On Thu, 28 Jan 2021 11:36:01 +
Mark Brown wrote:
> On Thu, Jan 28, 2021 at 11:11:28AM +, Andre Przywara wrote:
> > Dmitry Torokhov wrote:
> > > On Wed, Jan 27, 2021 at 05:24:45PM +, Andre Przywara wrote:
>
> > > > Check for the regmap_irqc member to be not NULL before
On Thu, Jan 28, 2021 at 11:11:28AM +, Andre Przywara wrote:
> Dmitry Torokhov wrote:
> > On Wed, Jan 27, 2021 at 05:24:45PM +, Andre Przywara wrote:
> > > Check for the regmap_irqc member to be not NULL before proceeding with
> > > probe. This gets normally filled by the call to
On Wed, 27 Jan 2021 11:42:15 -0800
Dmitry Torokhov wrote:
Hi Dmitry,
thanks for your feedback!
> On Wed, Jan 27, 2021 at 05:24:45PM +, Andre Przywara wrote:
> > On at least one board (Orangepi Zero2) the AXP305 PMIC does not have its
> > interrupt line connected to the CPU (mostly because
Hi Andre,
On Wed, Jan 27, 2021 at 05:24:45PM +, Andre Przywara wrote:
> On at least one board (Orangepi Zero2) the AXP305 PMIC does not have its
> interrupt line connected to the CPU (mostly because the H616 SoC does
> not feature an NMI pin anymore).
> After allowing the AXP driver to
On at least one board (Orangepi Zero2) the AXP305 PMIC does not have its
interrupt line connected to the CPU (mostly because the H616 SoC does
not feature an NMI pin anymore).
After allowing the AXP driver to proceed without an "interrupts"
property [1], the axp20x-pek driver crashes with a NULL
6 matches
Mail list logo
