On Sun, 10 Jan 2010 21:28:29 +0100
Németh Márton nm...@freemail.hu wrote:
I tested the behaviour a little bit more. Out of 100 plug-ins:
OK: 81 times
pac7302: reg_w_page(): Failed to write register to index 0x49, value
0x0, error -71: 19 times
Other error message I haven't got, so 19% of
Sorry, I forgot to attach the patch.
In some usbsnoop files I have, the index 0x48 is not loaded. May you
try the attached patch (skip the index 0x48 and remove the delay).
(Stéphane, est-ce que tu peux voir aussi ce que ça donne chez toi?)
Regards.
--
Ken ar c'hentañ | **
Good morning.
I have a Pinnacle Pctv Hybrid Pro Stick 330E. Downloaded, compiled and
install last
drivers from v4l-dvb via mercurial.
- Downloaded the windows driver fromt
http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
- Extracted the firmware xc3028-v27.fw into
Hi,
On 01/10/2010 12:53 PM, Mauro Carvalho Chehab wrote:
Hans de Goede wrote:
Hi Mauro,
Please pull from:
http://linuxtv.org/hg/~hgoede/gspca
For:
1) A high priority (should go to 2.6.33) mr97310a driver fix
2) A new driver for streaming from sn9c2028 cams
3) Some gspca documentation
Hi,
On 01/10/2010 08:35 PM, Jean-Francois Moine wrote:
On Sun, 10 Jan 2010 17:38:00 +0100
Németh Mártonnm...@freemail.hu wrote:
I tried the gspca_sunplus driver from
http://linuxtv.org/hg/~jfrancois/gspca/ rev 13915 on top of Linux
kernel 2.6.32. When I plug the Trust 610 LCD pow...@m Zoom
Hi,
On 01/10/2010 09:37 AM, Jean-Francois Moine wrote:
On Sat, 9 Jan 2010 00:15:31 +0100
Jose Alberto Reguerojaregu...@telefonica.net wrote:
When capturing with mplayer I have this erros and the bottom of the
image is black.
[mjpeg @ 0xd2f300]error y=29 x=0
[mjpeg @
On Mon, 11 Jan 2010 09:37:29 +0100
Hans de Goede hdego...@redhat.com wrote:
This is the infamous zc3xx bottom of the image is missing in 320x240
problem, with several sensors the register settings we took from the
windows driver will only give you 320x232 (iirc), we tried changing
them to get
Em Wed, 09 Dec 2009 17:08:27 -0200
Mauro Carvalho Chehab mche...@redhat.com escreveu:
Huang Shijie wrote:
The TLG2300 is a chip of Telegent System.
It support analog tv,DVB-T and radio in a single chip.
The chip has been used in several dongles, such as aeromax DH-9000:
El Lunes, 11 de Enero de 2010, Jean-Francois Moine escribió:
On Mon, 11 Jan 2010 09:37:29 +0100
Hans de Goede hdego...@redhat.com wrote:
This is the infamous zc3xx bottom of the image is missing in 320x240
problem, with several sensors the register settings we took from the
windows
Vaibhav,
Hans already merged my dm365 patches. So you have rebase this to that before
merging.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
phone: 301-407-9583
email: m-kariche...@ti.com
-Original Message-
From: Hiremath, Vaibhav
Sent: Monday,
Jean-Francois Moine írta:
Sorry, I forgot to attach the patch.
In some usbsnoop files I have, the index 0x48 is not loaded. May you
try the attached patch (skip the index 0x48 and remove the delay).
100 plug-ins out of 100 OK, no errors: I say go for this patch.
I applied the patch on top
On Mon, 11 Jan 2010 01:22:50 +0100
Hans de Goede hdego...@redhat.com wrote:
You did not mark this as high priority, still it should go into
2.6.33. can you please send a mail to Mauro asking for this ?
The previous change (test of the interface class) had not a high
priority, so, it will not
Hi Mauro,
Please pull from http://linuxtv.org/hg/~jfrancois/v4l-dvb
for the following 11 changesets:
01/11: gspca - ov534/ov534_9: Split the ov534 subdriver.
http://linuxtv.org/hg/~jfrancois/v4l-dvb?cmd=changeset;node=b3b5fdea85f9
02/11: gspca - zc3xx: Cleanup code.
Hello,
I use a Media-Pointer MP-S2 Dual DVB-S2 PCIe card with the latest drivers from
the git-Repository
http://projects.vdr-developer.org/repositories/show/mediapointer-dvb-s2 .
I tried to write udev rules to define the adapter names of the tuner to avoid
that the device names could change at
On Samstag, 9. Januar 2010, JD Louw wrote:
On Wed, 2010-01-06 at 22:17 +0200, Theunis Potgieter wrote:
2010/1/2 JD Louw jd.l...@mweb.co.za:
On Sat, 2010-01-02 at 09:39 +0200, Theunis Potgieter wrote:
2010/1/1 JD Louw jd.l...@mweb.co.za:
On Tue, 2009-12-29 at 23:23 +0200, Theunis
From: Muralidharan Karicheri m-kariche...@ti.com
Re-sending the patches based on Kevin's comments.
Following are the changes from v3 :-
- replaced CLK entries with clk_add_alias() calls
- removed unused vpss_master and vpss_slave entries
This combines the two patches sent earlier to change
From: Muralidharan Karicheri m-kariche...@ti.com
Rebased to latest linux-next tree
Updated based on Kevin's comments on clock configuration.
The ccdc now uses a generic name for clocks. master and slave. On individual
platforms
these clocks will inherit from the platform specific clock. This
From: Muralidharan Karicheri m-kariche...@ti.com
Rebased to latest linux-next tree
This combines the two patches sent earlier to change the clock configuration
and converting ccdc drivers to platform drivers. This has updated comments
against v1 of these patches.
In this patch, the clock
From: Muralidharan Karicheri m-kariche...@ti.com
Rebased to latest linux-next tree
Updated based on Kevin's comments on clock configuration.
The ccdc now uses a generic name for clocks. master and slave. On
individual platforms
these clocks will inherit from the platform specific clock. This
On Fri, 08 Jan 2010 13:59:14 +0100, Samuel Rakitnican
samuel.rakitni...@gmail.com wrote:
On Tue, 05 Jan 2010 21:11:59 +0100, Samuel Rakitničan
samuel.rakitni...@gmail.com wrote:
Hi,
I have an old bt878 based analog card. It's 'Hauppauge WinTV Radio'
model 44914,
rev C121.
I'm trying
Hi Mauro Kevin,
I am re-sending these patches to do following:-
1) arch patches are re-created based on Linus tree
2) V4l patches are rebased to latest linux-next tree
These patches will override the pull request from Hans.
I am trying to setup mercurial to send the pull request, but
will take
Hello Mauro,
Please PULL from http://www.kernellabs.com/hg/~dheitmueller/dib0700_ir
for the following:
dib0700: rework IR logic for firmware 1.20
You had mentioned that you intended to do some porting of the dib0700
to use your new backend, so please do me a favor and merge this
*before* you
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Jan 11 19:00:04 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13915:82bbb3bd0f0a
gcc version: gcc
m-kariche...@ti.com writes:
From: Muralidharan Karicheri m-kariche...@ti.com
Re-sending the patches based on Kevin's comments.
Following are the changes from v3 :-
- replaced CLK entries with clk_add_alias() calls
- removed unused vpss_master and vpss_slave entries
This combines the
m-kariche...@ti.com writes:
From: Muralidharan Karicheri m-kariche...@ti.com
Rebased to latest linux-next tree
Updated based on Kevin's comments on clock configuration.
Since the above comments are useful for reviewers but not for the git
history, the should come after the '---' separator.
Hello,
I am user of Huappuage HVR1120, and I have problem with radio FM use in linux
mode.
Distribution OpenSuse11.2
Kernel 2.6.31.8-0.1-desktop
Firmware dvb-fe-tda10048-1.0.fw loaded
Analog and Digital Television are OK in both Windows and Linux.
Windows is using Hauppauge WinTV7 v7.027313
From: Muralidharan Karicheri m-kariche...@ti.com
Following are the changes from v3 :-
- added ccdc clocks through clk_add_alias() calls
This combines the two patches sent earlier to change the clock configuration
and converting ccdc drivers to platform drivers. This has updated comments
From: Muralidharan Karicheri m-kariche...@ti.com
This combines the two patches sent earlier to change the clock configuration
and converting ccdc drivers to platform drivers. This has updated comments
against v1 of these patches.
In this patch, the clock configuration is moved to ccdc driver
From: Muralidharan Karicheri m-kariche...@ti.com
Updated based on Kevin's comments on clock configuration.
The ccdc now uses a generic name for clocks. master and slave. On
individual platforms
these clocks will inherit from the platform specific clock. This will allow
re-use of
the driver for
From: Muralidharan Karicheri m-kariche...@ti.com
Updated based on Kevin's comments on clock configuration.
The ccdc now uses a generic name for clocks. master and slave. On individual
platforms
these clocks will inherit from the platform specific clock. This will allow
re-use of
the driver for
Kevin,
Reworked the patches and sent it again.
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
phone: 301-407-9583
email: m-kariche...@ti.com
-Original Message-
From: Kevin Hilman [mailto:khil...@deeprootsystems.com]
Sent: Monday, January 11, 2010
On Sun, 2010-01-10 at 09:56 +0100, Jiri Slaby wrote:
Stanse found a potential null dereference in cx18_dvb_start_feed
and cx18_dvb_stop_feed. There is a check for stream being NULL,
but it is dereferenced earlier. Move the dereference after the
check.
Signed-off-by: Jiri Slaby
On Sun, 2010-01-10 at 11:52 -0200, Mauro Carvalho Chehab wrote:
Andy Walls wrote:
On Sun, 2010-01-10 at 09:35 -0200, Mauro Carvalho Chehab wrote:
Andy Walls wrote:
Mauro,
If no one has any objections, please pull from
http://linuxtv.org/hg/~awalls/v4l-dvb-misc
for the following
m-kariche...@ti.com writes:
From: Muralidharan Karicheri m-kariche...@ti.com
This combines the two patches sent earlier to change the clock configuration
and converting ccdc drivers to platform drivers. This has updated comments
against v1 of these patches.
This part is also not relevant to
m-kariche...@ti.com writes:
From: Muralidharan Karicheri m-kariche...@ti.com
Following are the changes from v3 :-
- added ccdc clocks through clk_add_alias() calls
All the 'changes from vN' comments are not really relevant to the
final git history. Please add them after the '---' as well.
Hello,
Steps to reproduce with dmesg output:
# echo 7 4 1 7 /proc/sys/kernel/printk
# modprobe b2c2-flexcop
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded
successfully
# insmod b2c2-flexcop-pci.ko debug=0x1f
flexcop-pci: will use the HW PID filter
flexcop-pci: card
Em Wed, 09 Dec 2009 17:08:27 -0200
Mauro Carvalho Chehabmche...@redhat.com escreveu:
Huang Shijie wrote:
The TLG2300 is a chip of Telegent System.
It support analog tv,DVB-T and radio in a single chip.
The chip has been used in several dongles, such as aeromax DH-9000:
Hi!
Am Montag, den 11.01.2010, 11:59 -0700 schrieb Gordon Smith:
I need to bit twiddle saa7134 gpio pins from userspace.
To use gpio-sysfs, I need a GPIO number to export each pin, but I
do not know how to find such a number.
Card is RTD Embedded Technologies VFG7350
38 matches
Mail list logo