Hi,
with STB0899-based TT-Budget S2-3200 I'm occasionaly experiencing
lost TS packets when the stream is routed via CAM. The transponder
bandwidth is quite high, with SR27500, FEC 3/4 and 8PSK it yields
almost 60 Mbit/s. The CAM is a CI+ type, thus capable of running its
TS interface upto 96
On Feb 05 Hans Verkuil wrote:
The following changes since commit ffd14aab03dbb8bb1bac5284603835f94d833bd6:
Devin Heitmueller (1):
[media] au0828: fix VBI handling when in V4L2 streaming mode
are available in the git repository at:
ssh://linuxtv.org/git/hverkuil/media_tree.git
Since the drivers/ieee1394/ backend was removed from firedtv, its I/O no
longer needs to be abstracted as exchangeable backend methods.
Also, ieee1394 variants of module and device probe and removal are no
longer there. Move module probe and removal into firedtv-fw.c where
device probe and
This tuner PLL has missing initialisation settings resulting in
haphazard tuning. The PLL LPF was set to just 22000 symbol rate.
Basically, the module is a Sharp BS2F7HZ0194 (STV0299+IX2410)
I have had problems implementing the PLL in a new driver and
did not want to break the IX2410 out of the
If the memory allocation to 'state' succeeds but we jump to the 'error'
label before 'state' is assigned to fe-tuner_priv, then the call to
'zl10036_release(fe)' at the 'error:' label will not free 'state', but
only what was previously assigned to 'tuner_priv', thus leaking the memory
On Tue, 2011-02-01 at 13:49 -0200, Mauro Carvalho Chehab wrote:
Hi Lawrence,
Em 08-01-2011 16:45, Lawrence Rust escreveu:
Thanks for the info on the PVR-150. It largely confirmed what I had
surmised - that the two cards disagree about serial audio data format.
Before my patch, the
In drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c:ttusb_boot_dsp() we
need to call release_firmware(fw) before returning or we'll leak - no
matter if we succeed or fail.
Signed-off-by: Jesper Juhl j...@chaosbits.net
---
dvb-ttusb-budget.c |1 +
1 file changed, 1 insertion(+)
compile
I am trying to resurrect my MythBuntu system with a DViCO FusionHDTV7
Dual Express. I had previously had some issues with trying to get
channels working in MythTV (
http://www.mail-archive.com/linux-media@vger.kernel.org/msg03846.html
), but now it locks up with MythBuntu 10.10 when I scan for
Op 06-02-11 23:46, Dave Johansen schreef:
I am trying to resurrect my MythBuntu system with a DViCO FusionHDTV7
Dual Express. I had previously had some issues with trying to get
channels working in MythTV (
http://www.mail-archive.com/linux-media@vger.kernel.org/msg03846.html
), but now it locks
On 07/02/2011, at 9:16, Dave Johansen wrote:
Here's the output from scan:
scan /usr/share/dvb/atsc/us-ATSC-
center-frequencies-8VSB
scanning us-ATSC-center-frequencies-8VSB
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tune to: 189028615:8VSB
WARNING: filter timeout
On Sun, Feb 06, 2011 at 03:46:59PM -0700, Dave Johansen wrote:
I am trying to resurrect my MythBuntu system with a DViCO FusionHDTV7
Dual Express. I had previously had some issues with trying to get
channels working in MythTV (
On Sun, Feb 6, 2011 at 4:14 PM, Daniel O'Connor dar...@dons.net.au wrote:
You could try the latest DVB drivers, although on my DViCo (which looks like
the DVB-T version of yours) they aren't any better.
However the drivers in Ubuntu at least work for 1 tuner, if I try and use
both in
On 07/02/2011, at 13:34, Dave Johansen wrote:
However the drivers in Ubuntu at least work for 1 tuner, if I try and use
both in mythtv one tends to lock up after a while :-/
I actually had the card working and tuning channels about 2 years ago
with Ubuntu 08.10 and 09.04. From what I
On Sun, Feb 6, 2011 at 9:10 PM, Daniel O'Connor dar...@dons.net.au wrote:
On 07/02/2011, at 13:34, Dave Johansen wrote:
However the drivers in Ubuntu at least work for 1 tuner, if I try and use
both in mythtv one tends to lock up after a while :-/
I actually had the card working and tuning
This patch series removes the last V4L1 drivers (Yay!), the obsolete dabusb
driver
and the ieee1394-stack part of the firedtv driver (the IEEE1394 stack was
removed in 2.6.37).
The firedtv changes have been tested and reviewed by Stefan.
I also added a fix for the saa7134-empress driver that
15 matches
Mail list logo