Adds GPIO based IR Receiver driver. It decodes signals using decoders
available in rc framework.
Signed-off-by: Ravi Kumar V
---
drivers/media/rc/Kconfig|9 ++
drivers/media/rc/Makefile |1 +
drivers/media/rc/gpio-ir-recv.c | 205 +++
in
This driver is for GPIO based IR receivers, it can listen only to IR receiver
modules which gives demodulated signal as output, this driver only passes the
interrupt events to rc framework where pulse and space widths are calculated
and input to decoders avaliable.
Ravi Kumar V (1):
rc: Add supp
Sriram,
On Sun, Feb 26, 2012 at 8:54 AM, Sriram V wrote:
> Hi,
> When I take the dump of the buffer which is pointed by "DATA MEM
> PING ADDRESS". It always shows 0x55.
> Even if i write 0x00 to the address. I do notice that it quickly
> changes to 0x55.
> Under what conditions could this happ
On Tue, Feb 28, 2012 at 02:03:30AM +0100, Steinar H. Gunderson wrote:
> I'm still not happy with the bit-banging on the I2C interface (as opposed to
> dealing with it in the interrupt handler); I long suspected it for causing
> the IRQ0 problems, especially as they seem to have a sort-of similar is
Hi,
This patch, against 3.3-rc4, is basically a conglomerate of patches that
together seem to make CA support on mantis working and stable, even on SMP
systems. (I'm using a Terratec Cinergy DVB-S2 card with a Conax CAM, with
mumudvb as userspace.) There are a few fixes from this mailing list and
Thank you both for your assistance.
I was able to make it work by correcting my vsync and hsync inputs,
adjusting the vertical blanking, and finally taking out all my debug
cruft that had built up.
It's nice that my changes were limited to the
board-omap3beagle-camera.c and my custom camera drive
Hi Dave,
2012/2/25 Dave Hylands :
>
> I'm not all that familiar with v4l, but based on what you've posted,
> you need to populate the read routine in your v4l2_fops structure to
> support read.
>
My bad! You are totally right: I forgot about my webcam.
When I did:
$ cat /dev/video0
I was actual
Am Montag, 27. Februar 2012 schrieb Daniel Glöckner:
> On Wed, Feb 22, 2012 at 11:22:02PM +0100, Hans-Frieder Vogt wrote:
> > 0040: Firmware_CODELENGTH bytes
>
> Some time ago I analyzed the firmware of the AF9035.
> The firmware download command inside the on-chip ROM expects chunks
> with a
Hi Sakari,
On 02/26/2012 11:25 PM, Sakari Ailus wrote:
>>> I think we could use the framesize control to tell the size of the frame, or
>>> however it is done for jpeg blobs.
>>
>> Yes, we could add a standard framesize control to the Image Source class but
>> it
>> will solve only part of the pr
Sometimes there is a problem when trying to access the non-existing
registers of the second demodulator path on the STV0903.
This change removes the calls in case the driver is used on a STV0903.
Signed-off-by: Andreas Regel
---
drivers/media/dvb/frontends/stv090x.c | 141
+++
Use error counter 1 of the STV090x to get a correct bit error rate value.
Signed-off-by: Andreas Regel
---
drivers/media/dvb/frontends/stv090x.c | 30
+-
1 files changed, 29 insertions(+), 1 deletions(-)
diff --git a/drivers/media/dvb/frontends/stv090x.c
b/driv
Fix typo in register macros of ERRCNT2.
Signed-off-by: Andreas Regel
---
drivers/media/dvb/frontends/stv090x.c |2 +-
drivers/media/dvb/frontends/stv090x_reg.h |4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb/frontends/stv090x.c
b/drivers/me
Hi Jean-François,
On 02/27/2012 01:06 PM, Jean-Francois Moine wrote:
> The following changes since commit a3db60bcf7671cc011ab4f848cbc40ff7ab52c1e:
>
>[media] xc5000: declare firmware configuration structures as static const
> (2012-02-14 17:22:46 -0200)
>
> are available in the git reposit
Op 26 februari 2012 11:11 heeft Lars Hanisch
het volgende geschreven:
> Since you are using Ubuntu, you can find a nearly up-to-date dkms of
> linux-media with the patches of Oliver Endriss at
> https://launchpad.net/~yavdr/+archive/main called linux-media-dkms
>
> With this my Cine-C/T with a
Hi,
Please use "reply all", otherwise the list will not benefit from your
experience. ;-)
Am 27.02.2012 19:27, schrieb Martin Herrman:
Op 26 februari 2012 11:11 heeft Lars Hanisch
het volgende geschreven:
Since you are using Ubuntu, you can find a nearly up-to-date dkms of
linux-media wit
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date:Mon Feb 27 19:00:20 CET 2012
git hash:a3db60bcf7671cc011ab4f848cbc40ff7ab52c1e
gcc version: i686-linux-gcc (GCC
On Monday 27 February 2012 09:42:40 Hans Verkuil wrote:
> On Sunday, February 26, 2012 22:02:51 Ondrej Zary wrote:
> > On Friday 24 February 2012 10:00:01 Hans Verkuil wrote:
> > > On Wednesday, February 22, 2012 09:35:28 Ondrej Zary wrote:
> > > > On Tuesday 21 February 2012, Hans Verkuil wrote:
>
Hi Hans,
Agreed I don't mind to create new controls for below things
1) FM RX Band selection (US/Europe, Japan and Russian bands)
2) FM RX RDS AF turn ON/OFF
3) FM RX RSSI level set/get
4) FM TX Alternate Frequency set/get
5) FM RX De-Emphasis mode set/get
However, previously you have suggested
On Mon, Feb 27, 2012 at 6:44 AM, Mauro Carvalho Chehab
wrote:
> Em 27-02-2012 07:15, Michael Krufky escreveu:
>> On Fri, Feb 24, 2012 at 2:27 PM, Mauro Carvalho Chehab
>> wrote:
>>> Em 07-02-2012 15:08, Michael Krufky escreveu:
There are some new revisions of the HVR-1900 around whose DVB-T
Hi Laurent,
Laurent Pinchart wrote:
> Hi Sakari,
>
> On Thursday 23 February 2012 07:57:54 Sakari Ailus wrote:
>> Laurent Pinchart wrote:
>>> On Monday 20 February 2012 03:56:45 Sakari Ailus wrote:
Unify functions to get try pointers and validate the pad number accessed
by
the user
The following changes since commit a3db60bcf7671cc011ab4f848cbc40ff7ab52c1e:
[media] xc5000: declare firmware configuration structures as static const
(2012-02-14 17:22:46 -0200)
are available in the git repository at:
git://linuxtv.org/jfrancois/gspca.git for_v3.4
for you to fetch changes
The raw Sony IR decoder decodes 15bit messages slightly incorrectly.
To decode the function number, it shifts the bits right by 7 so that the
function is in bits 7:1, masks with 0xFD (0b1101), and does an 8 bit
reverse so it ends up in bits 6:0. The mask should be 0xFE to correspond
with bits 7
Em 27-02-2012 07:15, Michael Krufky escreveu:
> On Fri, Feb 24, 2012 at 2:27 PM, Mauro Carvalho Chehab
> wrote:
>> Em 07-02-2012 15:08, Michael Krufky escreveu:
>>> There are some new revisions of the HVR-1900 around whose DVB-T
>>> support is broken without this small bug-fix. Please merge asap
On 27 February 2012 09:49, Guennadi Liakhovetski wrote:
> Hi Javier
>
> On Wed, 22 Feb 2012, Javier Martin wrote:
>
>> Signed-off-by: Javier Martin
>> ---
>> Changes since v1:
>> - Adapt to [PATCH v4 4/4] media i.MX27 camera: handle overflows properly.
>>
>> ---
>> drivers/media/video/mx2_came
Hi,
On 02/26/2012 09:58 PM, Guennadi Liakhovetski wrote:
>>> It might be difficult to completely eliminate the CPU, at the very least
>>> you need to queue and dequeue buffers to and from the V4L driver. To avoid
>>> even that, in principle, you could try to use only one buffer, but I don't
>
On Fri, Feb 24, 2012 at 2:27 PM, Mauro Carvalho Chehab
wrote:
> Em 07-02-2012 15:08, Michael Krufky escreveu:
>> There are some new revisions of the HVR-1900 around whose DVB-T
>> support is broken without this small bug-fix. Please merge asap -
>> this fix needs to go to stable kernels as well.
Hi Javier
On Wed, 22 Feb 2012, Javier Martin wrote:
> If the attached video sensor cannot provide the
> requested image size, try to use resizing engine
> included in the eMMa-PrP IP.
>
> This patch supports both averaging and bilinear
> algorithms.
>
> Signed-off-by: Javier Martin
> ---
> Ch
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Sunday, February 26, 2012 10:58 PM
To: Alex Gershgorin
Cc: linux-media@vger.kernel.org
Subject: RE: i.mx35 live video
On Sun, 26 Feb 2012, Alex Gershgorin wrote:
> > Thanks Guennadi for your quick respo
Hi Javier
On Wed, 22 Feb 2012, Javier Martin wrote:
> Signed-off-by: Javier Martin
> ---
> Changes since v1:
> - Adapt to [PATCH v4 4/4] media i.MX27 camera: handle overflows properly.
>
> ---
> drivers/media/video/mx2_camera.c | 26 --
> 1 files changed, 12 inserti
On Sunday, February 26, 2012 22:02:51 Ondrej Zary wrote:
> On Friday 24 February 2012 10:00:01 Hans Verkuil wrote:
> > On Wednesday, February 22, 2012 09:35:28 Ondrej Zary wrote:
> > > On Tuesday 21 February 2012, Hans Verkuil wrote:
> > > > On Saturday, February 18, 2012 17:45:45 Ondrej Zary wrote
30 matches
Mail list logo