Hi Paulo,
I've also done some work on libwebcam a while ago, but have not yet had
the time to send this to Martin Rubli. Attached are git format-patch
patches against the 0.2.1 branch of svn. Note these are against what
was in that branch when I did this work some months ago, so not sure
if it
p.s.
Some of my commit messages talk about them needing some
kernel changes / fixes. These are all long in place now
(since before the uvcvideo.h header become an official
userspace available kernel header).
Regards,
Hans
--
To unsubscribe from this list: send the line unsubscribe linux-media
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 05/03/2012 07:38 PM, Andy Walls wrote:
On Wed, 2012-05-02 at 00:53 -0400, Bob Lightfoot wrote:
Dear Mailing List linux-media:
I am attempting to use a Hauppage HVR-1600 purchased new in 2010
as an analog tv tuner in my HP Pavillion Elite
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
src/main.c | 14 ++
src/options.c|6 --
src/v4l2subdev.c | 22 ++
3 files changed, 36 insertions(+), 6 deletions(-)
diff --git a/src/main.c b/src/main.c
index 6de1031..6362f3e 100644
---
More flexible and extensible syntax for media-ctl which allows better usage
of the selection API.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
src/main.c | 17 +---
src/options.c|9 --
src/v4l2subdev.c | 73
Support the new selections API for crop. Fall back to use the old crop API
in case the selection API isn't available.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
src/main.c |4 ++-
src/v4l2subdev.c | 100 +-
src/v4l2subdev.h
Hans,
I've add you has a developer to the project, so you should be able to
commit these patches yourself,
I would suggest that you pushed a new branch with your changes and
after testing we merge them into the master.
I'm doing the same for some fixes I have planned and also for the code
for
This patch fixes the following sparse warnings
by removing use of duplicate const.
drivers/media/video/cx88/cx88.h:152:40:
warning: duplicate const
drivers/media/video/cx88/cx88-core.c:256:33:
warning: duplicate const
drivers/media/video/cx88/cx88-alsa.c:769:41:
warning:
Emil Goode wrote:
This patch fixes the following sparse warnings
by removing use of duplicate const.
Is this really just about quieting sparse noise?
I would find it clearer to read a more straightforward explanation
like
Remove some redundant uses of const detected by sparse:
but
Hi Mauro et al,
Please pull from my tree for:
-a small stk driver fix
-a bunch of gspca_pac73XX improvements
-removal of the long deprecated et61x251 driver
Note this pull request obsoletes my previous pull req.
The following changes since commit a1ac5dc28d2b4ca78e183229f7c595ffd725241c:
From: Hans Verkuil hans.verk...@cisco.com
There is no need to report an error in the log, you are already returning
that error to userspace after all.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/radio/si470x/radio-si470x-common.c | 78 +-
1 file
From: Hans Verkuil hans.verk...@cisco.com
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/radio/si470x/radio-si470x-common.c | 45 ++
1 file changed, 28 insertions(+), 17 deletions(-)
diff --git a/drivers/media/radio/si470x/radio-si470x-common.c
This patch series updates the si470x driver so that it uses the latest
frameworks and passes the v4l2-compliance test tool.
It also removes usb autosuspend and the stop/start of the radio in the
release/open fops. It was very, very confusing that 'arecord -D ... | aplay'
didn't work unless you
From: Hans Verkuil hans.verk...@cisco.com
The radio-si470x-usb driver supported both autosuspend and it stopped the
radio the moment the last user of the radio device closed it. However, that
was very confusing since if you play the audio from the device (e.g. through
arecord -D ... | aplay) then
From: Hans Verkuil hans.verk...@cisco.com
This cleans up the code and si470x now uses the proper v4l2 frameworks
and passes most of the v4l2-compliance tests.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/radio/si470x/radio-si470x-common.c | 193 +++---
Hi poma,
thanks for the very interesting links.
Il 04/05/2012 03:27, poma ha scritto:
On 05/03/2012 11:03 AM, Gianluca Gennari wrote:
Hi poma,
I have a 0BDA:2838 (Easycap EZTV646) and a 0BDA:2832 (no name 20x20mm
mini DVB-T stick) and both are based on the E4000 tuner, which is not
supported
Il 04/05/2012 03:27, poma ha scritto:
On 05/03/2012 11:03 AM, Gianluca Gennari wrote:
Hi poma,
I have a 0BDA:2838 (Easycap EZTV646) and a 0BDA:2832 (no name 20x20mm
mini DVB-T stick) and both are based on the E4000 tuner, which is not
supported in the kernel at the moment.
I have no idea if
Hi Sergio
Sorry about the delay.
On Wed, 18 Apr 2012, Aguirre, Sergio wrote:
From: Sergio Aguirre saagui...@ti.com
Signed-off-by: Sergio Aguirre saagui...@ti.com
---
drivers/media/video/soc_camera.c | 37 +
include/media/soc_camera.h |1 +
Hi,
I add a tv card support for saa7134 driver, the card name is Genius
TV Go A12 and i test the RF capture with pal-nc and I test the
composite input too. I want to known if I would make a patch or what i
have to do to give us the patch. Here is the code:
diff
Hi Mauro,
The following changes since commit 34b2debaa62bfa384ef91b61cf2c40c48e86a5e2:
s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS (2012-05-04
17:07:24 +0200)
are available in the git repository at:
git://git.infradead.org/users/kmpark/linux-samsung v4l-fimc-exynos4x12
for
Hi Guennadi,
No problem.
On Fri, May 4, 2012 at 10:05 AM, Guennadi Liakhovetski
g.liakhovet...@gmx.de wrote:
Hi Sergio
Sorry about the delay.
On Wed, 18 Apr 2012, Aguirre, Sergio wrote:
From: Sergio Aguirre saagui...@ti.com
Signed-off-by: Sergio Aguirre saagui...@ti.com
---
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date:Fri May 4 19:00:19 CEST 2012
git hash:a1ac5dc28d2b4ca78e183229f7c595ffd725241c
gcc version: i686-linux-gcc
Here is one more update of the camera class controls change set.
Changes since v3, these are mainly corrections after comments from
Hans (thank you!):
- V4L2_CID_IMAGE_STABILIZATION and V4L2_CID_WIDE_DYNAMIC_RANGE controls
type reverted back to boolean, added a note in the documentation that
This patch adds V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE control which is
an extended version of the V4L2_CID_AUTO_WHITE_BALANCE control,
including white balance presets. The following presets are defined:
- V4L2_WHITE_BALANCE_INCANDESCENT,
- V4L2_WHITE_BALANCE_FLUORESCENT,
-
The camera may in some conditions incorrectly determine the exposure,
and a manual automatic exposure correction may be needed. This patch
adds V4L2_CID_AUTO_EXPOSURE_BIAS control which allows to add some
offset in the automatic exposure control loop, to compensate for
frame under- or
Add ISO sensitivity and ISO auto/manual controls. The sensitivity
values are related to level of amplification of the analog signal
between image sensor and ADC. These controls allow to support sensors
exposing an interface to accept the ISO values directly.
Signed-off-by: Sylwester Nawrocki
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Documentation/DocBook/media/v4l/dev-subdev.xml | 27 +++-
.../media/v4l/vidioc-subdev-g-selection.xml| 14 --
include/linux/v4l2-subdev.h
The V4L2_CID_3A_LOCK bitmask control allows applications to pause
or resume the automatic exposure, focus and wite balance adjustments.
It can be used, for example, to lock the 3A adjustments right before
a still image is captured, for pre-focus, etc.
The applications can control each of the
Add following auto focus controls:
- V4L2_CID_AUTO_FOCUS_START - single-shot auto focus start
- V4L2_CID_AUTO_FOCUS_STOP - single-shot auto focus stop
- V4L2_CID_AUTO_FOCUS_STATUS - automatic focus status
- V4L2_CID_AUTO_FOCUS_AREA - automatic focus area selection
-
Add control for the scene mode feature available in image sensor
with more advanced ISP firmware. The V4L2_CID_SCENE_MODE menu
control allows to select a set of parameters or a specific image
processing and capture control algorithm optimized for common
image capture conditions.
Signed-off-by:
The camera automatic focus algorithms may require setting up
a spot or rectangle coordinates or multiple such parameters.
The automatic focus selection targets are introduced in order
to allow applications to query and set such coordinates. Those
selections are intended to be used together with
The V4L2_CID_EXPOSURE_METERING control allows to determine
a method used by the camera for measuring the amount of light
available for automatic exposure.
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park kyungmin.p...@samsung.com
---
Add V4L2_CID_WIDE_DYNAMIC_RANGE camera class control for the
camera wide dynamic range (WDR, HDR) feature. This control
can be used to enable/disable wide dynamic range. It might
get converted to a menu control in future if more options
are needed.
Signed-off-by: HeungJun Kim
Add V4L2_CID_IMAGE_STABILIZATION control for the camera image
stabilization feature. This control can be used to enable/disable
image stabilization. It might get converted to a menu control
in future if more options are needed.
Signed-off-by: HeungJun Kim riverful@samsung.com
Signed-off-by:
This patch adds v4l2_ctrl_new_std_int_menu() helper function which can
be used in drivers for creating standard integer menu control. It is
similar to v4l2_ctrl_new_std_menu(), except it doesn't have a mask
parameter and an additional qmenu parameter allows passing an array
of signed 64-bit
From: Manjunatha Halli x0130...@ti.com
This patch adds below features to TI's V4l2 FM driver for Wilink
chipsets,
1) FM RX Set frequency allows to set frequency anywhere between
65.5 MHz till 108 MHz (if chip is Wilink8 then till 164.55 MHz)
2) FM RX seek caters for band
From: Manjunatha Halli x0130...@ti.com
The list of new features -
1) New control class for FM RX
2) New FM RX CID's - De-Emphasis filter mode and RDS AF switch
3) New FM TX CID - RDS Alternate frequency set.
Signed-off-by: Manjunatha Halli x0130...@ti.com
---
From: Manjunatha Halli x0130...@ti.com
Signed-off-by: Manjunatha Halli x0130...@ti.com
---
drivers/media/video/v4l2-ctrls.c |1 +
include/linux/videodev2.h|1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/media/video/v4l2-ctrls.c
From: Manjunatha Halli x0130...@ti.com
This patch adds support for following FM TX RDS features,
1. Radio Text
2. PS Name
3. PI Code
4. PTY Code.
Along with above this patch fixes few other minor issues(like
fm tx get frequency, unnecessary error messages etc).
From: Manjunatha Halli x0130...@ti.com
Mauro and the list,
This version 4 of patchset resolves the comments received from
Han's on patchset v3.
This patchset creates new control class 'V4L2_CTRL_CLASS_FM_RX' for FM RX,
introduces 2 new CID's for FM RX and and 1 new CID for FM TX. Also adds 1
From: Manjunatha Halli x0130...@ti.com
This patch creates new ctrl class for FM RX and adds new CID's for
below FM features,
1) De-Emphasis filter mode
2) RDS Alternate Frequency switch
Also this patch adds a field for band selection in struct v4l2_hw_freq_seek
Signed-off-by:
Almost perfect :-)
Just a few things below and one I noticed in the first patch where you set
the maximum length of the various string controls to 0x. I wouldn't do
that: the control framework will actually allocate 2 * (maximum + 1) bytes of
memory for each string control. It wastes a lot of
On 05/04/2012 08:50 AM, Thomas Mair wrote:
Am 04.05.2012 03:27 schrieb poma pomidorabelis...@gmail.com:
On 05/03/2012 11:03 AM, Gianluca Gennari wrote:
Hi poma,
I have a 0BDA:2838 (Easycap EZTV646) and a 0BDA:2832 (no name 20x20mm
mini DVB-T stick) and both are based on the E4000 tuner,
On 05/04/2012 03:49 PM, Gianluca Gennari wrote:
Hi poma,
thanks for the very interesting links.
;)
Il 04/05/2012 03:27, poma ha scritto:
On 05/03/2012 11:03 AM, Gianluca Gennari wrote:
Hi poma,
I have a 0BDA:2838 (Easycap EZTV646) and a 0BDA:2832 (no name 20x20mm
mini DVB-T stick) and
Hi all,
I'm attempting to broadcast an mpeg2 transport stream created with
ffmpeg via DVB-T. I have a modulator card with kernel driver, and have
successfully modulated (and received with a simple Hauppage DVB-T USB
device) a transport stream file I obtained from a friend. My problem
is the
of Omnivision sensors
(2012-05-03 15:29:56 -0300)
are available in the git repository at:
git://git.linuxtv.org/mcisely/pvrusb2-20120504.git pvrusb2-merge-20120504
Hans Verkuil (1):
pvrusb2: convert to video_ioctl2
Mike Isely (9):
pvrusb2: Stop statically initializing reserved struct fields
Hi Antti,
I promised to put you in touch with some more knowledgeable people, so here they
are. Will made a few comments during our discussions (inserted verbatim below -
may or may not be relevant)... Please feel free to respond to Mr Cooke and/or
write to him and Greg.
Hin-Tak
Will Cooke
47 matches
Mail list logo