2013/3/1 Vikas Sajjan vikas.saj...@linaro.org:
Add support for parsing the display-timing node using video helper
function.
The DT node parsing is done only if 'dev.of_node'
exists and the NON-DT logic is still maintained under the 'else' part.
Signed-off-by: Leela Krishna Amudala
ts2020.h was included twice.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
drivers/media/usb/dvb-usb/dw2102.c |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/media/usb/dvb-usb/dw2102.c
b/drivers/media/usb/dvb-usb/dw2102.c
index 9578a67..c629d02 100644
Hi Sekhar,
Thanks for the patch!
On Tue, Mar 5, 2013 at 7:43 PM, Sekhar Nori nsek...@ti.com wrote:
drivers/media/platform/davinci/Kconfig uses selects where
it should be using 'depends on'. This results in warnings of
the following sort when doing randconfig builds.
warning:
On Wed 6 March 2013 10:48:13 volok...@gmail.com wrote:
Hi,
Hans
I found in d8077d2df184f3ef63ed9ff4579d41ca64e12855 commit,
that V4L2_CTRL_FLAG_VOLATILE flag was disabled for some STD controls
and fully disabled g_ctrl iface. So How can userspace know about changing
some values?
VOLATILE
On 3/6/2013 2:59 PM, Prabhakar Lad wrote:
config VIDEO_DAVINCI_VPIF_DISPLAY
tristate DM646x/DA850/OMAPL138 EVM Video Display
- depends on VIDEO_DEV (MACH_DAVINCI_DM6467_EVM ||
MACH_DAVINCI_DA850_EVM)
+ depends on VIDEO_DEV (MACH_DAVINCI_DM6467_EVM ||
Hi,
On 6 March 2013 14:12, Inki Dae inki@samsung.com wrote:
2013/3/1 Vikas Sajjan vikas.saj...@linaro.org:
Add support for parsing the display-timing node using video helper
function.
The DT node parsing is done only if 'dev.of_node'
exists and the NON-DT logic is still maintained under
On Wed, Mar 06, 2013 at 11:02:47AM +0100, Hans Verkuil wrote:
On Wed 6 March 2013 10:48:13 volok...@gmail.com wrote:
Hi,
Hans
I found in d8077d2df184f3ef63ed9ff4579d41ca64e12855 commit,
that V4L2_CTRL_FLAG_VOLATILE flag was disabled for some STD controls
and fully disabled g_ctrl
Sekhar,
On Wed, Mar 6, 2013 at 3:37 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 2:59 PM, Prabhakar Lad wrote:
config VIDEO_DAVINCI_VPIF_DISPLAY
tristate DM646x/DA850/OMAPL138 EVM Video Display
- depends on VIDEO_DEV (MACH_DAVINCI_DM6467_EVM ||
MACH_DAVINCI_DA850_EVM)
Sekhar,
On Wed, Mar 6, 2013 at 3:46 PM, Prabhakar Lad
prabhakar.cse...@gmail.com wrote:
Sekhar,
On Wed, Mar 6, 2013 at 3:37 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 2:59 PM, Prabhakar Lad wrote:
config VIDEO_DAVINCI_VPIF_DISPLAY
tristate DM646x/DA850/OMAPL138 EVM Video
On Wed, Mar 06, 2013 at 02:11:24PM +0400, volok...@gmail.com wrote:
On Wed, Mar 06, 2013 at 11:02:47AM +0100, Hans Verkuil wrote:
On Wed 6 March 2013 10:48:13 volok...@gmail.com wrote:
Hi,
Hans
I found in d8077d2df184f3ef63ed9ff4579d41ca64e12855 commit,
that
Hi,
Hans
I found in d8077d2df184f3ef63ed9ff4579d41ca64e12855 commit,
that V4L2_CTRL_FLAG_VOLATILE flag was disabled for some STD controls
and fully disabled g_ctrl iface. So How can userspace know about changing some
values?
Or is that right?
Regards,
Volokh
--
To unsubscribe from this list:
On 3/6/2013 3:46 PM, Prabhakar Lad wrote:
Sekhar,
On Wed, Mar 6, 2013 at 3:37 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 2:59 PM, Prabhakar Lad wrote:
config VIDEO_DAVINCI_VPIF_DISPLAY
tristate DM646x/DA850/OMAPL138 EVM Video Display
- depends on VIDEO_DEV
On Wed 6 March 2013 11:11:24 volok...@gmail.com wrote:
On Wed, Mar 06, 2013 at 11:02:47AM +0100, Hans Verkuil wrote:
On Wed 6 March 2013 10:48:13 volok...@gmail.com wrote:
Hi,
Hans
I found in d8077d2df184f3ef63ed9ff4579d41ca64e12855 commit,
that V4L2_CTRL_FLAG_VOLATILE flag was
On Wed, Mar 6, 2013 at 3:53 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 3:46 PM, Prabhakar Lad wrote:
Sekhar,
On Wed, Mar 6, 2013 at 3:37 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 2:59 PM, Prabhakar Lad wrote:
config VIDEO_DAVINCI_VPIF_DISPLAY
tristate
On Tue, Mar 05, 2013 at 10:32:33PM +0100, jande...@dommel.be wrote:
Your local avf4910a copy probably offers not much more than the one
over here ?
https://github.com/wurststulle/ngene_2400i/tree/2377b1fd99d91ff355a5e46881ef27ccc87cb376
No, mainly cleanup and coding style conversion.
A few DSP
The following patchset features:
1] Creating a common pipeline framework which can be used by all
Exynos series SoCs for developing media device drivers.
2] Modified the existing fimc-mdevice for exynos4 to use the common
pipeline framework.
3] Adding of media device driver for Exynos5 Imaging
This patch modifies the current fimc_pipeline to exynos_pipeline,
which can be used across multiple media device drivers.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
drivers/media/platform/s5p-fimc/fimc-capture.c | 96 +++-
drivers/media/platform/s5p-fimc/fimc-core.h
This patch adds the Exynos5 soc compatibility to the fimc-lite driver.
It also adds a version checking to deal with the changes between
different fimc-lite hardware versions.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
drivers/media/platform/s5p-fimc/fimc-lite.c | 23
This patch adds the following functionalities to existing driver
1] FIMC-LITE supports multiple DMA shadow registers from Exynos5 onwards.
This patch adds the functionality of using shadow registers by
checking the current FIMC-LITE hardware version.
2] Fixes Buffer corruption on DMA output from
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
drivers/media/platform/s5p-fimc/mipi-csis.c |1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/platform/s5p-fimc/mipi-csis.c
b/drivers/media/platform/s5p-fimc/mipi-csis.c
index df4411c..debda7c 100644
---
This patch adds necessary source definations needed for mipi-csis
driver and adds devicetree node for exynos5250.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
arch/arm/boot/dts/exynos5250.dtsi | 18 ++
arch/arm/mach-exynos/clock-exynos5.c| 16
This patch adds necessary source definitions needed for FIMC-LITE
driver and adds devicetree node for exynos5250.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
arch/arm/boot/dts/exynos5250.dtsi | 21 +
arch/arm/mach-exynos/clock-exynos5.c|4
This patch adds support for media device for EXYNOS5 SoCs.
The current media device supports the following ips to connect
through the media controller framework.
* MIPI-CSIS
Support interconnection(subdev interface) between devices
* FIMC-LITE
Support capture interface from device(Sensor,
Add device nodes for pinctrl group-1 for Exynos5250 SoC.
This only adds cam1 specific pinctrl nodes to the file.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 41 +
arch/arm/boot/dts/exynos5250.dtsi
This patch adds the default pinctrl functionality to the
i2c device nodes on exynos5250-smdk5250.dts file
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 22 --
1 file changed, 16 insertions(+), 6 deletions(-)
diff
This patch adds the media device driver specific dt bindings
to the Exynos5 specific SoCs.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
arch/arm/boot/dts/exynos5250.dtsi | 64 +
1 file changed, 36 insertions(+), 28 deletions(-)
diff --git
This patch adds the dt support to m5mols driver.
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
drivers/media/i2c/m5mols/m5mols_core.c | 54 +++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/m5mols/m5mols_core.c
Signed-off-by: Shaik Ameer Basha shaik.am...@samsung.com
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 43 -
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index
mfc-encoder is not working in the latest kernel giving the
erorr Adding control (15) failed. Adding the missing step
parameter in this control to fix the issue.
Signed-off-by: Arun Kumar K arun...@samsung.com
---
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c |1 +
1 file changed, 1
Hi all,
I have a TerraTec Cinergy T PCIe Dual card and I can't get it to work.
I had been using it several months ago, with some success, although the
stability wasn't ideal. Then I moved it to another machine to check if
it was any better on Windows (and indeed it was better.) Now I put it
back
I have the same card, and have not much problems. I have some reception
issues, but I don't think it's to blame on the card (yet). I do use
tvheadend however.
In anycase, can you use w_scan or dvb-scan?
On 06-03-13 14:27, Jean Delvare wrote:
Hi all,
I have a TerraTec Cinergy T PCIe Dual
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 18:21
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW PATCH V4 01/12] [media] marvell-ccic: add MIPI support for
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 18:08
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW PATCH V4 05/12] [media] marvell-ccic: add new formats
support
Hi, Guennadi
Thank you very much for your review and comments!
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 05:35
To: Albert Wang
Cc: cor...@lwn.net; Linux Media Mailing List; Libin Yang
Subject: Re: [REVIEW PATCH V4 01/12]
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 17:51
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW PATCH V4 02/12] [media] marvell-ccic: add clock tree
support
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 18:18
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW PATCH V4 07/12] [media] marvell-ccic: switch to resource
managed
On 3/6/2013 4:05 PM, Prabhakar Lad wrote:
On Wed, Mar 6, 2013 at 3:53 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 3:46 PM, Prabhakar Lad wrote:
Sekhar,
On Wed, Mar 6, 2013 at 3:37 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 2:59 PM, Prabhakar Lad wrote:
config
On Tue, Jan 8, 2013 at 10:46 PM, Antti Palosaari wrote:
Try to downgrade Kernels until you find working one.
Guess it is probably the only way. I will try.
Seeing other message about a problem with the same card, made me think
I forgot to post my conclusion.
I downgraded to 3.6.5 which was
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 21:33
To: Albert Wang
Cc: cor...@lwn.net; Linux Media Mailing List; Libin Yang
Subject: Re: [REVIEW PATCH V4 10/12] [media] marvell-ccic: add soc_camera
support
for
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 18:43
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW PATCH V4 09/12] [media] marvell-ccic: use unsigned int
type
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 22:17
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW PATCH V4 12/12] [media] marvell-ccic: add 3 frame buffers
Hi Albert
On Wed, 6 Mar 2013, Albert Wang wrote:
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 17:51
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW
On Wed, 6 Mar 2013, Albert Wang wrote:
[snip]
+ if (cam-frame_state.usebufs == 0)
+ cam-frame_state.usebufs++;
+ else {
+ set_bit(CF_SINGLE_BUFFER, cam-flags);
+ cam-frame_state.singles++;
+ if
Hi Oliver,
Thanks for your fast reply.
On Wed, 06 Mar 2013 14:58:05 +0100, Oliver Schinagl wrote:
I have the same card, and have not much problems. I have some reception
issues, but I don't think it's to blame on the card (yet). I do use
tvheadend however.
In anycase, can you use w_scan
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Wednesday, 06 March, 2013 23:00
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: RE: [REVIEW PATCH V4 02/12] [media] marvell-ccic: add clock tree
support
On Wed, 6 Mar 2013, Albert Wang wrote:
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Tuesday, 05 March, 2013 18:43
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: Re: [REVIEW PATCH V4 09/12]
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Wednesday, 06 March, 2013 23:02
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: RE: [REVIEW PATCH V4 12/12] [media] marvell-ccic: add 3 frame buffers
Am 05.03.2013 11:55, schrieb Mauro Carvalho Chehab:
Prepare to register a separate bus for the second bus.
For now, just add a new field. A latter patch will add the
bits to make it work.
This patch was generated by this script:
perl -e 'while () { if
Hi Mauro,
I'm basically fine this patch, just a few comments/thoughts:
Am 05.03.2013 11:55, schrieb Mauro Carvalho Chehab:
Register both buses 0 and 1 via I2C API. For now, bus 0 is used
only by eeprom on all known devices. Later patches will be needed
if this changes in the future.
Hi all,
I have a TerraTec Cinergy T PCIe Dual card, with DRX-3916K and
DRX-3913K frontends. I am thus using the drxk dvb-frontend driver.
While trying to find the best antenna, position and amplification, I
found that the statistics returned by the drxk driver look quite bad:
$ femon -H 3
FE:
* Timo Kokkonen timo.t.kokko...@iki.fi [130305 22:26]:
On 03.05 2013 17:09:53, Tony Lindgren wrote:
* Mauro Carvalho Chehab mche...@redhat.com [130305 16:28]:
Em Tue, 5 Mar 2013 23:16:46 +0100
Arnd Bergmann a...@arndb.de escreveu:
OMAP1 no longer provides its own clock interfaces
Am 05.03.2013 16:43, schrieb Devin Heitmueller:
2013/3/5 Mauro Carvalho Chehab mche...@redhat.com:
The em2874 chips and upper have 2 buses. On all known devices, bus 0 is
currently used only by eeprom, and bus 1 for the rest. Add support to
register both buses.
Did you add a mutex to ensure
On 03/06/13 16:03, Jean Delvare wrote:
Hi Oliver,
Thanks for your fast reply.
On Wed, 06 Mar 2013 14:58:05 +0100, Oliver Schinagl wrote:
I have the same card, and have not much problems. I have some reception
issues, but I don't think it's to blame on the card (yet). I do use
tvheadend
On Wed, 6 Mar 2013, Albert Wang wrote:
Hi, Guennadi
-Original Message-
From: Guennadi Liakhovetski [mailto:g.liakhovet...@gmx.de]
Sent: Wednesday, 06 March, 2013 23:02
To: Albert Wang
Cc: cor...@lwn.net; linux-media@vger.kernel.org; Libin Yang
Subject: RE: [REVIEW PATCH V4
Hi Oliver,
On Wed, 06 Mar 2013 19:07:01 +0100, Oliver Schinagl wrote:
On 03/06/13 16:03, Jean Delvare wrote:
It turns out that my problem is the antenna. I was using the antenna I
have been using with my previous card, which is an internal DVB-T
antenna with amplification (external power
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Wed Mar 6 19:00:28 CET 2013
git branch: test
git hash: 4ca286610f664acf3153634f3930acd2de993a9f
gcc
On 03/06/13 18:36, Jean Delvare wrote:
Hi all,
I have a TerraTec Cinergy T PCIe Dual card, with DRX-3916K and
DRX-3913K frontends. I am thus using the drxk dvb-frontend driver.
While trying to find the best antenna, position and amplification, I
found that the statistics returned by the drxk
Hi Matt,
While I added this patch to my cx231xx patch series, Mauro didn't pick it
up for some reason. So for when he gets around to looking at your patch, I want
to
add my:
Acked-by: Hans Verkuil hans.verk...@cisco.com
Regards,
Hans
On Sat March 2 2013 00:53:30 Matt Gomboc wrote:
From: Syam Sidhardhan s.s...@samsung.com
kfree on NULL pointer is a no-op.
Signed-off-by: Syam Sidhardhan s.s...@samsung.com
---
v1 - Corrected the from address
drivers/media/usb/dvb-usb-v2/lmedm04.c |3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git
Three minor patches for rc-core...(against the for_v3.9 branch)
---
David Härdeman (3):
rc-core: don't treat dev-rc_map.rc_type as a bitmap
rc-core: rename ir_input_class to rc_class
rc-core: initialize rc-core earlier if built-in
drivers/media/i2c/ir-kbd-i2c.c|1
store_protocols() treats dev-rc_map.rc_type as a bitmap which is wrong for
two reasons. First of all, it is pretty bogus to change the protocol type of
the keymap just because the hardware has been asked to decode a different
protocol.
Second, dev-rc_map.rc_type is an enum (i.e. a single
The name is already misleading and will be more so in the future as the
connection to the input subsystem is obscured away further.
Signed-off-by: David Härdeman da...@hardeman.nu
---
drivers/media/rc/rc-main.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git
rc-core is a subsystem so it should be registered earlier if built into the
kernel.
Signed-off-by: David Härdeman da...@hardeman.nu
---
drivers/media/rc/rc-main.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index
Em Wed, 06 Mar 2013 20:53:23 +0100
Oliver Schinagl oli...@schinagl.nl escreveu:
On 03/06/13 18:36, Jean Delvare wrote:
Hi all,
I have a TerraTec Cinergy T PCIe Dual card, with DRX-3916K and
DRX-3913K frontends. I am thus using the drxk dvb-frontend driver.
While trying to find the best
Hi Arun,
On 03/06/2013 02:15 PM, Arun Kumar K wrote:
mfc-encoder is not working in the latest kernel giving the
erorr Adding control (15) failed. Adding the missing step
parameter in this control to fix the issue.
Do you mean this problem was not observed in 3.8 kernel and something
has
On Wed, Mar 06, 2013 at 12:52:00PM -0500, Darrick Burch wrote:
Kolokh:
I've been doing some work on the go7007 driver in order to make it work
properly with my device, an ADS DVD XPress DX2. This device is USB and
uses the EZ-USB controller using a tw9906 as a video decoder. There is
On Monday 18 February 2013 03:57:01 Michael Krufky wrote:
On Sat, Feb 16, 2013 at 11:39 AM, Ondrej Zary
li...@rainbow-software.org wrote:
On Friday 01 February 2013 21:21:23 Ondrej Zary wrote:
Add AverMedia AverTV Satellite Hybrid+FM (A706) card to saa7134 driver.
This requires some
Fix warnings as errors:
error: implicit declaration of function ‘kzalloc’
[-Werror=implicit-function-declaration]
error: implicit declaration of function ‘kfree’
[-Werror=implicit-function-declaration]
Signed-off-by: Volokh Konstantin volok...@gmail.com
---
drivers/media/i2c/ov7640.c|
Signed-off-by: Volokh Konstantin volok...@gmail.com
---
drivers/media/i2c/tw2804.c |1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/media/i2c/tw2804.c b/drivers/media/i2c/tw2804.c
index 096b657..45a4cd3 100644
--- a/drivers/media/i2c/tw2804.c
+++
That is welcome by me, let me know if any action is needed on my end.
I was also wondering about adding the definition for the device 0572:58a3
which is identically identified in the distributed Windows driver from
Geniatech, but as it is not verified and may not even be in production, I
suppose
MultiPLP filtering support for CXD2820r, not tested.
Somebody from Russia please test (exclude Moscow, because used singlePLP).
Usual used PLP 0 (4TV + 3 radio) and 1 (4TV). PLP 2,3 reserved (regional
channels).
P.S. You can use my scan-s2 with multistream support -
Hi Sylwester,
On Thu, Mar 7, 2013 at 3:40 AM, Sylwester Nawrocki
sylvester.nawro...@gmail.com wrote:
Hi Arun,
On 03/06/2013 02:15 PM, Arun Kumar K wrote:
mfc-encoder is not working in the latest kernel giving the
erorr Adding control (15) failed. Adding the missing step
parameter in this
Hi,
I'm looking for some guidance on the correct way to handle a new pixel
format. What I'm dealing with is a CMOS image sensor that supports
dynamic switching between linear and iHDR modes. iHDR stands for
interlaced High Dynamic Range and is a mode where odd and even lines
have different
Hi Sylwester,
Do you mean this problem was not observed in 3.8 kernel and something
has changed in the v4l2 core so it fails in 3.9-rc now ? Or is it
related to some change in the driver itself ?
I saw this problem in 3.9rc1 and also in 3.8 stable.
But I havent seen this in media-tree v3.9
Add display-timing node parsing to drm fimd and depends on
the display helper patchset at
http://lists.freedesktop.org/archives/dri-devel/2013-January/033998.html
changes since v10:
- abandoned the pinctrl patch, as commented by Linus Walleij
linus.wall...@linaro.org
-
Add support for parsing the display-timing node using video helper
function.
The DT node parsing is done only if 'dev.of_node'
exists and the NON-DT logic is still maintained under the 'else' part.
Signed-off-by: Leela Krishna Amudala l.kris...@samsung.com
Signed-off-by: Vikas Sajjan
patch adds select OF_VIDEOMODE and select FB_MODE_HELPERS when
EXYNOS_DRM_FIMD config is selected.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
drivers/gpu/drm/exynos/Kconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/exynos/Kconfig
Hi Mr Inki Dae,
On 28 February 2013 08:12, Joonyoung Shim jy0922.s...@samsung.com wrote:
On 02/27/2013 07:32 PM, Vikas Sajjan wrote:
modified compatible string for exynos4 fimd as exynos4210-fimd and
exynos5 fimd as exynos5250-fimd to stick to the rule that compatible
value should be named
From: Lad, Prabhakar prabhakar@ti.com
export the symbols which are used by two modules vpif_capture and
vpif_display.
This patch fixes following error:
ERROR: ch_params [drivers/media/platform/davinci/vpif_display.ko] undefined!
ERROR: vpif_ch_params_count
On 5 March 2013 17:46, Prabhakar Lad prabhakar.cse...@gmail.com wrote:
Hi Sachin,
Thanks for the patch!
On Tue, Mar 5, 2013 at 5:22 PM, Sachin Kamat sachin.ka...@linaro.org wrote:
module_platform_driver() eliminates the boilerplate and simplifies
the code.
Signed-off-by: Sachin Kamat
Already merged. :)
-Original Message-
From: Vikas Sajjan [mailto:vikas.saj...@linaro.org]
Sent: Thursday, March 07, 2013 4:09 PM
To: InKi Dae
Cc: dri-de...@lists.freedesktop.org; linux-media@vger.kernel.org;
kgene@samsung.com; Joonyoung Shim; sunil joshi
Subject: Re: [PATCH]
Sekhar,
On Wed, Mar 6, 2013 at 7:51 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 4:05 PM, Prabhakar Lad wrote:
On Wed, Mar 6, 2013 at 3:53 PM, Sekhar Nori nsek...@ti.com wrote:
On 3/6/2013 3:46 PM, Prabhakar Lad wrote:
Sekhar,
On Wed, Mar 6, 2013 at 3:37 PM, Sekhar Nori nsek...@ti.com
Hi Sachin,
On Thu, Mar 7, 2013 at 12:46 PM, Sachin Kamat sachin.ka...@linaro.org wrote:
On 5 March 2013 17:46, Prabhakar Lad prabhakar.cse...@gmail.com wrote:
Hi Sachin,
Thanks for the patch!
On Tue, Mar 5, 2013 at 5:22 PM, Sachin Kamat sachin.ka...@linaro.org wrote:
Thanks.
On 7 March 2013 12:47, Inki Dae inki@samsung.com wrote:
Already merged. :)
-Original Message-
From: Vikas Sajjan [mailto:vikas.saj...@linaro.org]
Sent: Thursday, March 07, 2013 4:09 PM
To: InKi Dae
Cc: dri-de...@lists.freedesktop.org; linux-media@vger.kernel.org;
Add display-timing node parsing to drm fimd and depends on
the display helper patchset at
http://lists.freedesktop.org/archives/dri-devel/2013-January/033998.html
changes since v11:
- Oops, there was a build error, fixed that.
changes since v10:
- abandoned the pinctrl patch, as
Add support for parsing the display-timing node using video helper
function.
The DT node parsing is done only if 'dev.of_node'
exists and the NON-DT logic is still maintained under the 'else' part.
Signed-off-by: Leela Krishna Amudala l.kris...@samsung.com
Signed-off-by: Vikas Sajjan
patch adds select OF_VIDEOMODE and select FB_MODE_HELPERS when
EXYNOS_DRM_FIMD config is selected.
Signed-off-by: Vikas Sajjan vikas.saj...@linaro.org
---
drivers/gpu/drm/exynos/Kconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/exynos/Kconfig
ZCH Industrial Co., Ltd is is located in Donguang city since 2006's, We have
strong area in fields of silicone rubber series, Such as silicone watches,
wristband, bracelet,phone case,kitchware,cake mould,ballet point toe
pads,keyboard etc.
Also our sales term responsible for promotion,
88 matches
Mail list logo