Hello,
On 04/13/2013 01:52 AM, Scott Jiang wrote:
This is a bridge driver for blackfin diplay device.
It can work with ppi or eppi interface. DV timings
are supported.
Signed-off-by: Scott Jiang
---
drivers/media/platform/blackfin/Kconfig| 15 +-
drivers/media/platform/blackfin/Mak
Signed-off-by: Ismael Luceno
---
drivers/staging/media/solo6x10/solo6x10-v4l2-enc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/media/solo6x10/solo6x10-v4l2-enc.c
b/drivers/staging/media/solo6x10/solo6x10-v4l2-enc.c
index 6147bb2..d132d3b 100644
--- a/drivers/staging/med
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Fri Apr 12 19:00:17 CEST 2013
git branch: test
git hash: 81e096c8ac6a064854c2157e0bf802dc4906678c
gcc versi
According to IRC discussion that device has different remote.
New board layout is needed as remote keymap is property of board config.
regards
Antti
On 04/12/2013 05:40 PM, Antti Palosaari wrote:
On 04/12/2013 05:18 PM, Jakob Haufe wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Delock
Hi folks,
Last year in the end of november, I mailed to this list to request
help with a driver issue for:
cx231xx #0: New device Conexant Corporation Polaris AV Capture @ 480
Mbps (0572:58a6) with 6 interfaces
The driver is in the kernel (tested Fedora and Ubuntu) but the device
does not work.
It
Map RC_MAP_REDDO to that device.
Signed-off-by: Antti Palosaari
---
drivers/media/usb/em28xx/em28xx-cards.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c
b/drivers/media/usb/em28xx/em28xx-cards.c
index 1d3866f..26ff1a7 100644
--- a/drivers/media/usb
It is very similar than rc-msi-digivox-iii but new keytable is needed
as there is one existing scancode mapped to different button. Also that
one has less buttons.
NEC extended protocol with address 0x61d6.
Signed-off-by: Antti Palosaari
---
drivers/media/rc/keymaps/Makefile | 1 +
drivers/m
Signed-off-by: Antti Palosaari
---
drivers/media/rc/keymaps/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/rc/keymaps/Makefile
b/drivers/media/rc/keymaps/Makefile
index 04baac4..5ab94ea 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media
Hi,
I created an initial scan file for the German provider Net Aachen (see
attachment).
Regards
Till
# HG changeset patch
# User Till Maas
# Date 1365783843 -7200
# Node ID fcdee9c712c94ac8b830dcbfec31ea2e5489adc3
# Parent f3a70b206f0f809b53e2de7d77578d15b7d831cb
add util/scan/dvb-c/de-NetAache
Currently bridge device drivers register devices for all subdevices
synchronously, tupically, during their probing. E.g. if an I2C CMOS sensor
is attached to a video bridge device, the bridge driver will create an I2C
device and wait for the respective I2C driver to probe. This makes linking
of dev
Hi Mauro
Just two more patches for 3.10. Note, that one of them is for MAINTAINERS.
Should it go via media or via someone else's tree?
The following changes since commit 81e096c8ac6a064854c2157e0bf802dc4906678c:
[media] budget: Add support for Philips Semi Sylt PCI ref. design (2013-04-08
07
Currently soc-camera uses a single camera host callback to activate the
interface master clock and to configure the interface for a specific
client. However, during probing we might not have the information about
a client, we just need to activate the clock. Add new camera host driver
callbacks to
All soc-camera host drivers include a pointer to an soc-camera device in
their host private struct to check, that only one client is connected.
Move this common code to soc_camera.c.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/platform/soc_camera/atmel-isi.c | 10 +-
driver
When adding and removing a client, the mx2-camera driver only activates
and deactivates its camera interface respectively, which doesn't include
any client-specific actions. Move this functionality into .clock_start()
and .clock_stop() callbacks.
Signed-off-by: Guennadi Liakhovetski
---
drivers/
Some CEU implementations have non-standard (larger) maximum supported
width and height values. Add two OF properties to specify them.
Signed-off-by: Guennadi Liakhovetski
---
.../devicetree/bindings/media/sh_mobile_ceu.txt| 18 +++
.../platform/soc_camera/sh_mobile_ceu_camera.c
Use the v4l2-async API to support asynchronous subdevice probing,
including the CSI2 subdevice. Synchronous probing is still supported too.
Signed-off-by: Guennadi Liakhovetski
---
.../platform/soc_camera/sh_mobile_ceu_camera.c | 134 -
drivers/media/platform/soc_camera/sh_m
Add an OF hook to sh_mobile_ceu_camera.c, no properties so far. Booting
with DT also requires platform data to be optional.
Signed-off-by: Guennadi Liakhovetski
---
.../platform/soc_camera/sh_mobile_ceu_camera.c | 33 ++--
1 files changed, 23 insertions(+), 10 deletions(-)
During client probing we only have to turn on the host's clock, no need to
actually attach the client to the host.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/platform/soc_camera/soc_camera.c |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/p
Instead of centrally enabling and disabling subdevice master clocks in
soc-camera core, let subdevice drivers do that themselves, using the
V4L2 clock API and soc-camera convenience wrappers.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/i2c/soc_camera/imx074.c | 18 ++-
Add support for asynchronous subdevice probing, using the v4l2-async API.
The legacy synchronous mode is still supported too, which allows to
gradually update drivers and platforms. The selected approach adds a
notifier for each struct soc_camera_device instance, i.e. for each video
device node, ev
All existing soc-camera host drivers use .clock_start() and .clock_stop()
callbacks to activate and deactivate their camera interfaces, whereas
.add() and .remove() callbacks are usually dummy. Make the former two
compulsory and the latter two optional.
Signed-off-by: Guennadi Liakhovetski
---
d
Typical video devices like camera sensors require an external clock source.
Many such devices cannot even access their hardware registers without a
running clock. These clock sources should be controlled by their consumers.
This should be performed, using the generic clock framework. Unfortunately
Here comes a v9. The most visible change to v8 is the number of patches:-)
The reason is, that I lied in v7. The "small" change to patch #1 "Removed
the struct v4l2-clock subdevice member" actually required a lot of changes
to soc-camera to split turning on and off the master clock by camera-host
d
When adding and removing a client, the atmel-isi camera host driver only
activates and deactivates its camera interface respectively, which doesn't
include any client-specific actions. Move this functionality into
.clock_start() and .clock_stop() callbacks.
Signed-off-by: Guennadi Liakhovetski
--
Both synchronous and asynchronous imx074 subdevice probing is supported by
this patch.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/i2c/soc_camera/imx074.c | 22 +++---
1 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/soc_camera/imx074
When adding and removing a client, the sh-mobile-ceu-camera driver activates
and, respectively, deactivates its camera interface and, if necessary, the
CSI2 controller. Only handling of the CSI2 interface is client-specific and
is only needed, when a data-exchange with the client is taking place. M
When adding and removing a client, the omap1-camera driver only activates
and deactivates its camera interface respectively, which doesn't include
any client-specific actions. Move this functionality into .clock_start()
and .clock_stop() callbacks.
Signed-off-by: Guennadi Liakhovetski
---
driver
When adding and removing a client, the pxa-camera driver only activates
and deactivates its camera interface respectively, which doesn't include
any client-specific actions. Move this functionality into .clock_start()
and .clock_stop() callbacks.
Signed-off-by: Guennadi Liakhovetski
---
drivers/
Register the imx074 camera I2C and the CSI-2 platform devices directly
in board platform data instead of letting the sh_mobile_ceu_camera driver
and the soc-camera framework register them at their run-time. This uses
the V4L2 asynchronous subdevice probing capability.
Signed-off-by: Guennadi Liakh
When adding and removing a client, the mx1-camera driver only activates
and deactivates its camera interface respectively, which doesn't include
any client-specific actions. Move this functionality into .clock_start()
and .clock_stop() callbacks.
Signed-off-by: Guennadi Liakhovetski
---
drivers/
When adding and removing a client, the mx3-camera driver only activates
and deactivates its camera interface respectively, which doesn't include
any client-specific actions. Move this functionality into .clock_start()
and .clock_stop() callbacks.
Signed-off-by: Guennadi Liakhovetski
---
drivers/
This RFC looks at adding support for motion detection to V4L2. This is the main
missing piece that prevents the go7007 and solo6x10 drivers from being moved
into mainline from the staging directory.
Step one is to look at existing drivers/hardware:
1) The go7007 driver:
- divides the fra
On 04/12/2013 05:17 PM, Jakob Haufe wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 9 Apr 2013 14:48:05 +0200
Jakob Haufe wrote:
Will do so tonight and report back.
Took a little longer but it worked as expected. Patch follows in a separate
mail.
dmesg output:
[19.474818] em2
On 04/12/2013 05:18 PM, Jakob Haufe wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Delock 61959 seems to be a relabeled version of Maxmedia UB425-TC with a
different USB ID. PCB is marked as "UB425-TC Ver: A" and this change
makes it work without any obvious problems.
Signed-off-by: Jakob
Hi Laurent
Thanks for the review.
On Fri, 12 Apr 2013, Laurent Pinchart wrote:
[snip]
> > + switch (hw->bus_type) {
> > + case V4L2_ASYNC_BUS_CUSTOM:
> > + match = hw->match.special.match;
> > + if (!match)
> > +
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Delock 61959 seems to be a relabeled version of Maxmedia UB425-TC with a
different USB ID. PCB is marked as "UB425-TC Ver: A" and this change
makes it work without any obvious problems.
Signed-off-by: Jakob Haufe
- ---
drivers/media/usb/em28xx/em28x
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 9 Apr 2013 14:48:05 +0200
Jakob Haufe wrote:
> Will do so tonight and report back.
Took a little longer but it worked as expected. Patch follows in a separate
mail.
dmesg output:
[19.474818] em28xx: New device USB 2875 Device @ 480 Mbps (
Add a proper card entry for this device, rather than abusing entries that are
not-quite-right.
Regards,
Hans
Signed-off-by: Hans Verkuil
---
Documentation/video4linux/CARDLIST.bttv |1 +
drivers/media/pci/bt8xx/bttv-cards.c| 22 +-
drivers/media/pci/bt8xx/
Hi Guennadi,
On 04/12/2013 08:13 AM, Guennadi Liakhovetski wrote:
> On Thu, 11 Apr 2013, Sylwester Nawrocki wrote:
>> On 04/11/2013 11:59 AM, Guennadi Liakhovetski wrote:
>>> On Mon, 8 Apr 2013, Guennadi Liakhovetski wrote:
>>>
> Mostly just a re-spin of v7 with minor modifications.
>
>>>
Hi Mauro,
Here is my set of pending V4L2 patches for 3.10.
Patchwork has been updated accordingly.
Regards,
Hans
The following changes since commit 81e096c8ac6a064854c2157e0bf802dc4906678c:
[media] budget: Add support for Philips Semi Sylt PCI ref. design (2013-04-08
07:28:01 -0300
Hi
On Wed, 10 Apr 2013, Silviu-Mihai Popescu wrote:
> Convert all uses of devm_request_and_ioremap() to the newly introduced
> devm_ioremap_resource() which provides more consistent error handling.
>
> Signed-off-by: Silviu-Mihai Popescu
Thanks for the patch, but an equivalent one is already u
Hi Guennadi,
Thanks for the patch.
On Monday 08 April 2013 17:05:33 Guennadi Liakhovetski wrote:
> Currently bridge device drivers register devices for all subdevices
> synchronously, tupically, during their probing. E.g. if an I2C CMOS sensor
> is attached to a video bridge device, the bridge dr
Hi Hans/Mauro,
Ahh here is the final pull request hopefully I wont add anymore :)
sorry for inconvenience,
had to add on more patch at the final moment. Following is the fresh
pull request.
Let me know if replying on top if it is OK or if if you want a fresh mail.
Note: All the ARM platform chang
Hello.
On 12-04-2013 12:05, Hans Verkuil wrote:
Thanks for the patch!
I've got some comments about this, though.
See below:
On Fri April 12 2013 00:08:09 Sergei Shtylyov wrote:
From: Vladimir Barinov
Add subdev video ops for ADV7180 video decoder. This makes decoder usable on
the
On Sat April 13 2013 01:52:57 Scott Jiang wrote:
> Signed-off-by: Scott Jiang
Is it OK if I postpone these two patches for 3.11? They don't make sense
AFAICT without the new display driver, and that will definitely not make it
for 3.10.
Regards,
Hans
> ---
> drivers/media/platform/bla
Sekhar,
On Fri, Apr 12, 2013 at 4:50 PM, Sekhar Nori wrote:
>
>
> On 4/12/2013 4:35 PM, Prabhakar lad wrote:
>> From: Lad, Prabhakar
>>
>> This patch replaces V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL
>> respectively as this are the proper video standards.
>>
>> Signed-off-by: Lad, Prabhakar
This is a bridge driver for blackfin diplay device.
It can work with ppi or eppi interface. DV timings
are supported.
Signed-off-by: Scott Jiang
---
drivers/media/platform/blackfin/Kconfig| 15 +-
drivers/media/platform/blackfin/Makefile |1 +
drivers/media/platform/blackfin/
Signed-off-by: Scott Jiang
---
drivers/media/platform/blackfin/ppi.c | 12
1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/media/platform/blackfin/ppi.c
b/drivers/media/platform/blackfin/ppi.c
index 01b5b50..15e9c2b 100644
--- a/drivers/media/platform/black
More dv_timings ioctl ops are introduced in video core.
Add query_dv_timings/enum_dv_timings accordingly.
Signed-off-by: Scott Jiang
---
drivers/media/platform/blackfin/bfin_capture.c | 28 ++--
1 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/media/p
(A bit late, sorry)
On Thursday 07 March 2013 22:37:26 Guennadi Liakhovetski wrote:
> On Wed, 6 Mar 2013, Christian Rhodin wrote:
> > Hi,
> >
> > I'm looking for some guidance on the correct way to handle a new pixel
> > format. What I'm dealing with is a CMOS image sensor that supports
> > dyna
Hi all,
Some recent discussions regarding the correct behavior of QUERYSTD brought up
a feeling of déjà vu. Some digging in my mail history resulted in this three
year old RFC which I promised to implement but obviously I never did.
Things have changed a bit. Today v4l_querystd in v4l2-ioctl.c in
On Fri April 12 2013 11:31:36 Laurent Pinchart wrote:
> On Wednesday 10 April 2013 09:27:07 Hans Verkuil wrote:
> > Hi all,
> >
> > Just in case someone has time to work on this: I thought I'd write down some
> > of the ideas I have to improve the streaming code in v4l2-ctl:
> >
> > 1) Add an opt
On Wednesday 10 April 2013 09:27:07 Hans Verkuil wrote:
> Hi all,
>
> Just in case someone has time to work on this: I thought I'd write down some
> of the ideas I have to improve the streaming code in v4l2-ctl:
>
> 1) Add an option to select between limited and full range colors.
>
> 2) Add mor
Hi Mauro,
The following changes since commit 81e096c8ac6a064854c2157e0bf802dc4906678c:
[media] budget: Add support for Philips Semi Sylt PCI ref. design
(2013-04-08 07:28:01 -0300)
are available in the git repository at:
git://linuxtv.org/pinchartl/media.git omap3isp/next
for you to fetch
Hi Mauro,
The following changes since commit 81e096c8ac6a064854c2157e0bf802dc4906678c:
[media] budget: Add support for Philips Semi Sylt PCI ref. design
(2013-04-08 07:28:01 -0300)
are available in the git repository at:
git://linuxtv.org/pinchartl/media.git sensors/next
for you to fetch
Hi Hans/Mauro,
I have included two more patches in the pull, following is the fresh
pull request.
Regards,
--Prabhakar
The following changes since commit 81e096c8ac6a064854c2157e0bf802dc4906678c:
[media] budget: Add support for Philips Semi Sylt PCI ref. design
(2013-04-08 07:28:01 -0300)
ar
Hi Hans/Mauro,
Please pull the following patches for Davinci media. Few patches
contain platform changes for ARM which have been Acked by its maintainer.
Regards,
--Prabhakar Lad
The following changes since commit 81e096c8ac6a064854c2157e0bf802dc4906678c:
[media] budget: Add support for Phili
Hi Mike,
On Thursday 11 April 2013 16:19:23 Mike Turquette wrote:
> Quoting Laurent Pinchart (2013-04-11 15:35:38)
> > On Thursday 11 April 2013 11:52:58 Mike Turquette wrote:
[snip]
> > > I came into this thread late and don't have the actual patches in my
> > > inbox for review. That said, I
Hi Sergei,
Thanks for the patch!
I've got some comments about this, though.
See below:
On Fri April 12 2013 00:08:09 Sergei Shtylyov wrote:
> From: Vladimir Barinov
>
> Add subdev video ops for ADV7180 video decoder. This makes decoder usable on
> the soc-camera drivers.
>
> Signed-off-by:
59 matches
Mail list logo
