Hello Gregor
Thanks for your comments. I have replied inline.
On Sat, Aug 3, 2013 at 6:42 PM, Gregor Jasny gja...@googlemail.com wrote:
On 8/3/13 12:42 AM, Ricardo Ribalda Delgado wrote:
+ case V4L2_PIX_FMT_RGB32:
+ switch (dest_pix_fmt) {
+ case
Hi,
I have a HP MCE ir transreceiver which is recognised as Fintek device.
The receiver works fine, however the transmitter only works when there
is no X session running.
When X is stopped and the following command is issued from the virtual
console (tty1), then the transmitter works:
irsend
Hi Arun,
On 08/02/2013 05:02 PM, Arun Kumar K wrote:
The hardware interface module finally sends the commands to the
FIMC-IS firmware and runs the interrupt handler for getting the
responses.
Signed-off-by: Arun Kumar Karun...@samsung.com
Signed-off-by: Kilyeon Imkilyeon...@samsung.com
---
Hi Su Jiaquan
On Sun, 4 Aug 2013, Su Jiaquan wrote:
Hi,
I know the title looks crazy, but here is our problem:
In our SoC based ISP, the hardware can be divide to several blocks.
Some blocks can do color space conversion(raw to YUV
interleave/planar), others can do the pixel
On Wed, Jul 31, 2013 at 12:00:03AM +0100, Sean Young wrote:
Note that with the rc-feedback trigger, the cir-rx trigger is now
redundant. The cir-tx trigger is not used by default; if this
functionality is desired then it should exist in rc-core, not in
a driver.
Also make sure that the led is
---
Hi Yaroslav,
the patch below should fix the Oops caused by sd_start() called too early, but
I am not sure about why sd_start() was called from sd_init() for Hercules
webcams in the first place, maybe the snippet marked with:
/* (from ms-win trace) */
in sd_start() must be moved to
Hi Sylwester,
On Sun, Aug 4, 2013 at 3:10 AM, Sylwester Nawrocki
sylvester.nawro...@gmail.com wrote:
Hi Arun,
On 08/02/2013 05:02 PM, Arun Kumar K wrote:
The patch series add support for Exynos5 camera subsystem. It
re-uses mipi-csis and fimc-lite from exynos4-is and adds a new
media
Hi Sylwester,
On 2 August 2013 12:02, Sachin Kamat sachin.ka...@linaro.org wrote:
__is_set_init_isp_aa and fimc_is_hw_set_tune currently do not have
any callers. However these functions may be used in the future. Hence
instead of deleting them, staticize and annotate them with __maybe_unused
On 2 August 2013 20:32, Arun Kumar K arun...@samsung.com wrote:
From: Shaik Ameer Basha shaik.am...@samsung.com
This patch adds support for media device for EXYNOS5 SoCs.
The current media device supports the following ips to connect
through the media controller framework.
* MIPI-CSIS