On 12/11/2013 03:53 PM, Wade Farnsworth wrote:
> Hi Hans,
>
> Hans Verkuil wrote:
>> On 12/11/13 13:44, Mauro Carvalho Chehab wrote:
>>> Em Wed, 11 Dec 2013 12:53:55 +0100
>>> Hans Verkuil escreveu:
>>>
Hi Mauro,
On 12/11/13 11:44, Mauro Carvalho Chehab wrote:
> Hans,
>
>>>
Use the csc library functions to configure the CSC block in VPE.
Some changes are required in try_fmt to handle the pix->colorspace parameter
more correctly. Previously, we copied the source queue colorspace to the
destination queue colorspace as we didn't support RGB formats. Now, we configure
pi
VPE and VIP IPs in DAR7x contain a scaler(SC) sub block. Create a library which
will perform scaler block related configurations and hold SC register
definitions. The functions provided by this library will be called by the vpe
and vip drivers using a sc_data handle.
The vpe_dev holds the sc_data
VPE and VIP IPs in DAR7x contain a color space converter(CSC) sub block. Create
a library which will perform CSC related configurations and hold CSC register
definitions. The functions provided by this library will be called by the vpe
and vip drivers using a csc_data handle.
The vpe_dev holds the
The struct vpdma_data_format holds the color format depth and the data_type
value needed to be programmed in the data descriptors. However, it doesn't
tell what type of color format is it, i.e, whether it is RGB, YUV or Misc.
This information is needed when by vpdma library when forming descriptor
Add the required SC register configurations which lets us perform linear scaling
for the supported range of horizontal and vertical scaling ratios.
The horizontal scaler performs polyphase scaling using it's 8 tap 32 phase
filter, decimation is performed when downscaling passes beyond 2x or 4x.
T
The VPE and VIP IPs in DRA7x contain common scaler and color conversion hardware
blocks. We create libraries for these components such that the vpe driver and
the vip driver(in future) can use these library funcs to configure the blocks.
There are some points for which I would like comments:
- Fo
Make the driver allocate dma buffers to store horizontal and scaler coeffs.
Use the scaler library api to choose and copy scaler coefficients to a
the above buffers based on the scaling ratio. Since the SC block comes after
the de-interlacer, make sure that the source height is doubled if de-interl
The CSC block can be used for color space conversion between YUV and RGB
formats.
It is configurable via a programmable set of coefficients. Add functionality to
choose the appropriate CSC coefficients and program them in the CSC registers.
We take the source and destination colorspace formats as
This RFC patch series moves sn9c102 and omap24xx/tcm825x to staging.
The sn9c102 driver has been deprecated for quite some time and most of the
supported webcams are now part of gspca. Nobody has the hardware for the
remaining webcams and nobody is actively maintaining this driver.
Converting this
From: Hans Verkuil
The omap24xx driver and the tcm825x sensor driver are the only two
remaining drivers to still use the old deprecated v4l2-int-device API.
Nobody maintains these drivers anymore. But unfortunately the v4l2-int-device
API is used by out-of-tree drivers (MXC platform). This is a
From: Hans Verkuil
During the last media summit meeting it was decided to move this driver to
staging as the first step to removing it altogether.
Most webcams covered by this driver are now supported by gspca. Nobody has the
hardware to convert the remaining devices to gspca.
This driver needs
[Repost, this time with rename-detection turned on...]
This RFC patch series moves sn9c102 and omap24xx/tcm825x to staging.
The sn9c102 driver has been deprecated for quite some time and most of the
supported webcams are now part of gspca. Nobody has the hardware for the
remaining webcams and nobo
Sakari asked me to reply to this old thread...
On 09/06/13 13:05, Laurent Pinchart wrote:
> Hi Sakari,
>
> On Thursday 05 September 2013 19:31:30 Sakari Ailus wrote:
>> On Sat, Aug 31, 2013 at 11:43:18PM +0200, Laurent Pinchart wrote:
>>> On Friday 30 August 2013 19:08:48 Sakari Ailus wrote:
Hans Verkuil wrote:
> On 12/11/2013 03:53 PM, Wade Farnsworth wrote:
>> Hi Hans,
>>
>> Hans Verkuil wrote:
>>> On 12/11/13 13:44, Mauro Carvalho Chehab wrote:
Em Wed, 11 Dec 2013 12:53:55 +0100
Hans Verkuil escreveu:
> Hi Mauro,
>
> On 12/11/13 11:44, Mauro Carvalho Cheh
Hello there,
I just ran the static analysis tool "cppcheck" over the
source code of v4l-utils-1.0.0. It said many things, including
1. [rds-saa6588.c:119]: (style) Expression '(X & 0x8) == 0x1' is always false.
Source code is
if (1 == (b[0] & 0x08)) {
Maybe the programmer intended
if
Hi Arun,
(Adding Mark and Mauro to Cc)
On 05/11/13 12:19, Arun Kumar K wrote:
> From: Shaik Ameer Basha
>
> The patch adds the DT binding doc for exynos5 SoC camera
> subsystem.
>
> Signed-off-by: Shaik Ameer Basha
> Signed-off-by: Arun Kumar K
> ---
> .../bindings/media/exynos5250-camera.t
Hans,
My name is pat brown. I work for motorola solutions.
I am using a 8 megapixel camera and the lib4vl2 library is giving me an error:
libv4l2: error converting / decoding frame data: v4l-convert: error
destination buffer too small (16777216 < 23970816)
VIDIOC_DQBUF: Bad address
v4l-uti
I think that needs device capability flag too (struct v4l2_capability)
but bits on that struct are quite short. Add it after V4L2_CAP_MODULATOR ?
OK, now all the API pieces seems to be there, so I am converting my existing
SDR drivers to that API and make some tests.
Antti Palosaari (2):
v4l2:
Add new V4L2 stream format definition, named V4L2_BUF_TYPE_SDR_RX,
for SDR receiver.
Signed-off-by: Antti Palosaari
---
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
include/trace/events/v4l2.h | 1 +
include/uapi/linux/videodev2.h | 11 +++
3 files changed, 13 insertions(
Enable format IOCTLs for SDR use. There are used for negotiate used
data stream format.
Signed-off-by: Antti Palosaari
---
drivers/media/v4l2-core/v4l2-dev.c | 12
drivers/media/v4l2-core/v4l2-ioctl.c | 26 ++
2 files changed, 38 insertions(+)
diff --git a
On 12.12.2013 09:50, Hans Verkuil wrote:
On 12/12/2013 12:54 AM, Antti Palosaari wrote:
Define tuner types V4L2_TUNER_ADC and V4L2_TUNER_SDR for SDR usage.
ADC is used for setting sampling rate (sampling frequency) to SDR
device.
Another tuner type, SDR, is possible RF tuner. Is is used to
dow
Hi Hans!
On 12.12.2013 09:55, Hans Verkuil wrote:
On 12/12/2013 12:54 AM, Antti Palosaari wrote:
Add V4L2_TUNER_CAP_1HZ for 1 Hz resolution.
Signed-off-by: Antti Palosaari
---
include/uapi/linux/videodev2.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/videodev2.h
On 12.12.2013 19:12, Antti Palosaari wrote:
On 12.12.2013 09:50, Hans Verkuil wrote:
On 12/12/2013 12:54 AM, Antti Palosaari wrote:
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c
b/drivers/media/v4l2-core/v4l2-ioctl.c
index bc10684..ee91a9f 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
Signed-off-by: Malcolm Priestley
Cc: sta...@vger.kernel.org # v3.11+
---
drivers/media/dvb-core/dvb-usb-ids.h | 1 +
drivers/media/usb/dvb-usb-v2/it913x.c | 3 +++
2 files changed, 4 insertions(+)
diff --git a/drivers/media/dvb-core/dvb-usb-ids.h
b/drivers/media/dvb-core/dvb-usb-ids.h
index 4
Hi,
I am resending these patches in the hope that git send-email does keep the
whitespace correct unlike Thunderbird.
Regards
Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://v
The two drivers LGDT3305 and TDA18271C2DD were not autoselected, so the
cx231xx_dvb module could not be loaded when MEDIA_SUBDRV_AUTOSELECT=y.
Signed-off-by: Matthias Schwarzott
---
drivers/media/usb/cx231xx/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/usb/cx231xx/
Do not shift the already 7bit i2c address.
Print a message also for write+read transactions.
For write+read, print the read buffer correctly instead of using the write
buffer.
Signed-off-by: Matthias Schwarzott
---
drivers/media/usb/cx231xx/cx231xx-i2c.c | 16
1 file changed, 12
PLL was attached twice to frontend0 leaving frontend1 without a tuner.
frontend0 is DVB-C and frontend1 is DVB-T.
Power also demods properly in order to provide gated I2C for tuner
during attach. dvb-pll attaches PLL even probing fails, but correct
it still...
Signed-off-by: Antti Palosaari
---
Hi Sylwester,
On Thu, Dec 12, 2013 at 9:02 PM, Sylwester Nawrocki
wrote:
> Hi Arun,
>
> (Adding Mark and Mauro to Cc)
>
> On 05/11/13 12:19, Arun Kumar K wrote:
>> From: Shaik Ameer Basha
>>
>> The patch adds the DT binding doc for exynos5 SoC camera
>> subsystem.
>>
>> Signed-off-by: Shaik Amee
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Fri Dec 13 04:00:34 CET 2013
git branch: test
git hash: 989af88339db26345e23271dae1089d949c4a0f1
gcc versio
From: Shaik Ameer Basha
This patch adds a top level media device driver for the Exynos5 SoC series
camera subsystem. The driver currently supports processing pipelines
involving following IP blocks:
* MIPI-CSIS
MIPI CSI-2 bus front-end to the FIMC-LITE, image sensors with MIPI CSI-2
bus shou
From: Shaik Ameer Basha
The patch adds the DT binding doc for exynos5 SoC camera
subsystem.
Signed-off-by: Shaik Ameer Basha
Signed-off-by: Arun Kumar K
---
.../bindings/media/exynos5250-camera.txt | 136
1 file changed, 136 insertions(+)
create mode 100644
D
This is part of Exynos5 IS driver series with review comments from Mark Rutland
addressed for media device driver DT binding part. Only the media driver part
of the full series is included in this patchset.
Changes from v9
---
- Addressed review comments from Mark Rutland
http://www.sp
We offer short and long term loans to customers at a rate of 3%, i.e car loans,
personal loans, business loans, etc. If you are interested in obtaining a loan
from us, please contact us via this email: sigmalo...@cash4u.com
Thanks for your anticipated patronage
Sigma Financial
--
To unsubscri
Reading eeprom works
Analog is untested
Signed-off-by: Matthias Schwarzott
---
drivers/media/usb/cx231xx/cx231xx-avcore.c | 1 +
drivers/media/usb/cx231xx/cx231xx-cards.c | 92 ++
drivers/media/usb/cx231xx/cx231xx-core.c | 3 +
drivers/media/usb/cx231xx/cx231xx.h
This patch series is the current state of my si2165 driver.
It works on some DVB-T channels and on some DVB-C channels.
Lot of stuff is missing, see patch description.
Maybe the si2165 driver also works on other si2165/si2163/si2161 based cards.
For DVB-C/DVB-T only cards it must be detected which
Signed-off-by: Matthias Schwarzott
---
drivers/media/usb/cx231xx/Kconfig | 1 +
drivers/media/usb/cx231xx/cx231xx-cards.c | 2 +-
drivers/media/usb/cx231xx/cx231xx-dvb.c | 25 +
3 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/cx
38 matches
Mail list logo