Robert Jarzmik writes:
> Convert pxa_camera from videobuf to videobuf2.
>
> As the soc_camera was already compatible with videobuf2, the port is
> quite straightforward.
>
> The special case of this code in which the vb2 to prepare is "too
> big" in terms of size for the new capture format, the p
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Tue Aug 16 04:00:22 CEST 2016
git branch: test
git hash: b6aa39228966e0d3f0bc3306be1892f87792903a
gcc versi
Rotates the big RGB packed table to landscape.
This is actually an example patch that depends on the past RFCv2 9 patches
series I sent before.
It uses LaTex adjustbox extension to rotate the packed RGB big table,
and rotate it to landscape. This way, the table appears on the entire
page.
It sho
On Mon, 15 Aug 2016 10:21:07 +0200
Markus Heiser wrote:
> Jonathan, we had this already, I gave you the links to "python community
> norms" and tools, please read/use them.
>
> * https://www.python.org/dev/peps/pep-0008/
> * https://www.pylint.org/
>
> Some of these norms might be unusual for C
This patch series fix the severe issues related to LaTeX output with media.
After applying it, "make pdfdocs" generates the Kernel documentation with
all books upstream, including the media books.
There are still some caveats, but the end result can be seen at:
https://mchehab.fedorapeople
Portrait is too small for some tables used at the media docs.
So, allow documents to tell Sphinx to generate some pages
in landscape by using:
.. raw:: latex
\begin{landscape}
.. raw:: latex
\end{landscape}
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/conf.py | 13 +++
The items at the sound carrier had a bullet. Those are not needed.
So, get rid of them.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/media/uapi/v4l/vidioc-enumstd.rst | 25 -
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/Documentation/media/ua
pdflatex doesn't like gif images:
None:None: WARNING: no matching candidate for image URI
u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt.*'
None:None: WARNING: no matching candidate for image URI
u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt_example.*'
But it works fine with png. So,
Somehow, the conversion broke a reference here. Re-add it.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/media/uapi/v4l/vidioc-enumstd.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst
b/Documentation/media/uapi/v4l/
-
PLEASE DO NOT APPLY THIS UPSTREAM
-
This hack addresses two issues with pdf generation from media
books:
1) Sphinx doesn't do the right thing if a block of code
is inside a table. This sounds a Sphinx bug. Perhaps it
can be f
Change multi-line note tags to be more symetric, e. g. not starting
the text together witht the tag.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/media/uapi/cec/cec-func-close.rst | 4 +++-
Documentation/media/uapi/cec/cec-func-ioctl.rst | 4 +++-
Documentation/medi
pdflatex doesn't accept using some UTF-8 chars, like
"equal or less than" or "equal or greater than" chars. However,
the media documents use them. So, we need to use XeLaTeX for
conversion, and a font that accepts such characters.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/Makefile.s
Enrich math formulas by using the Sphinx math. That will allow
using those formulas on pdf documents as well.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/conf.py | 9 +-
Documentation/media/uapi/v4l/pixfmt-007.rst | 175 ++--
2 files cha
The output for those notes are bad in pdf, as they're not
in a box with a different color. Also, it causes the output
to not build if the note is inside a table.
Change its implementation to avoid the above troubles.
The logic there came from:
https://stackoverflow.com/questions/606746/h
This patch removes the soc_camera API dependency from pxa_camera.
In the current status :
- all previously captures are working the same on pxa270
- the s_crop() call was removed, judged not working
(see what happens soc_camera_s_crop() when get_crop() == NULL)
- if the pixel clock is provide
Add sequence numbers to completed buffers.
Signed-off-by: Robert Jarzmik
---
Since v3: reset buffer sequence number in start_streaming()
---
drivers/media/platform/soc_camera/pxa_camera.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/media/platform/soc_camera/pxa_camera.c
b/d
As the mt9m111 is now working as a standalone v4l2 subdevice sensor,
move it out of soc_camera directory and severe its dependency on
soc_camera.
Signed-off-by: Robert Jarzmik
---
drivers/media/i2c/Kconfig |7 +
drivers/media/i2c/Makefile |1 +
drivers/media/i2c/
Remove the soc_camera adherence. Mostly the change removes the power
manipulation provided by soc_camera, and instead :
- powers on the sensor when the s_power control is activated
- powers on the sensor in initial probe
- enables and disables the MCLK provided to it in power on/off
Signed-off-
Hi Hans,
Now only your comments have been taken between v3 and v4, the buffer sequence
number reset, and the rebase on top of v4.8-rc1, which makes the diffstat with
the former submission :
drivers/media/i2c/mt9m111.c | 14 ++
drivers/media/platform/pxa_camera.c |
Convert pxa_camera from videobuf to videobuf2.
As the soc_camera was already compatible with videobuf2, the port is
quite straightforward.
The special case of this code in which the vb2 to prepare is "too
big" in terms of size for the new capture format, the pxa_camera will
fail.
Signed-off-by:
mt9m111 being a camera sensor, its colorspace should always be SRGB, for
both RGB based formats or YCbCr based ones.
Signed-off-by: Robert Jarzmik
---
drivers/media/i2c/soc_camera/mt9m111.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/soc_camera/m
Introduce sensor_call(), which will be used for all sensor invocations.
This is a preparation move to v4l2 device conversion, ie. soc_camera
adherence removal.
Signed-off-by: Robert Jarzmik
---
drivers/media/platform/soc_camera/pxa_camera.c | 27 ++
1 file changed, 15 ins
Move the functions in the file to be regrouped into meaningful blocks :
1. pxa camera core handling functions, manipulating the herdware
2. videobuf2 functions, dealing with video buffers
3. video ioctl (vidioc) related functions
4. driver probing, removal, suspend and resume
This patch doesn'
As the conversion to a v4l2 standalone device is finished, move
pxa_camera one directory up and finish severing any dependency to
soc_camera.
Signed-off-by: Robert Jarzmik
---
drivers/media/platform/Kconfig |8 +
drivers/media/platform/Makefile|1 +
driver
This is to be seen as a regression as the set_crop function is
removed. This is a temporary situation in the v4l2 porting, and will
have to be added later.
Signed-off-by: Robert Jarzmik
---
drivers/media/platform/soc_camera/pxa_camera.c | 76 --
1 file changed, 76 deletio
Add pxa_camera registers access through advanced video debugging.
Signed-off-by: Robert Jarzmik
---
drivers/media/platform/soc_camera/pxa_camera.c | 32 ++
1 file changed, 32 insertions(+)
diff --git a/drivers/media/platform/soc_camera/pxa_camera.c
b/drivers/media/platf
Instead of the legacy behavior where it was required to wait for all
video buffers to be finished by the hardware, use a cancel like strategy
: as soon as the stop_streaming() call is done, abort all DMA transfers,
report the already buffers as failed and return.
This makes stop_streaming() more a
Make all print consistent by always using :
- dev_xxx(pcdev_to_dev(pcdev), )
This prepares the soc_camera adherence removal by making these call rely
on only pcdev, and not the soc_camera icd structure.
Signed-off-by: Robert Jarzmik
---
drivers/media/platform/soc_camera/pxa_camera.c | 70 +
Add the MAINTAINERS' entry for Microchip / Atmel Image Sensor Controller.
Signed-off-by: Nicolas Ferre
Cc: Songjun Wu
---
MAINTAINERS | 8
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 45c98485c3f0..84786643ba4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
This series are experimental patches that change some things at the media
books in order to make pdflatex to produce a valid document.
The first patch use Sphinx math extension. Please notice that it only works if
the rst2pdf extension is disabled, as otherwise Sphinx 1.4.x will complain about
dup
Somehow, the conversion broke a reference here. Re-add it.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/media/uapi/v4l/vidioc-enumstd.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/media/uapi/v4l/vidioc-enumstd.rst
b/Documentation/media/uapi/v4l/
pdflatex doesn't like gif images:
None:None: WARNING: no matching candidate for image URI
u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt.*'
None:None: WARNING: no matching candidate for image URI
u'media/uapi/v4l/pixfmt-nv12mt_files/nv12mt_example.*'
But it works fine with png. So,
The LaTeX output format doesn't support less or equal UTF-8
symbols. So, we need to get rid of them or to convert to
math expressions.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst | 2 +-
Documentation/media/uapi/v4l/dev-overlay.rst
Enrich math formulas by using the Sphinx math. That will allow
using those formulas on pdf documents as well.
Signed-off-by: Mauro Carvalho Chehab
---
Documentation/conf.py | 9 +-
Documentation/media/uapi/v4l/pixfmt-007.rst | 175 ++--
2 files cha
Please, never apply this!
This hack comments out some stuff, in order to fix a few table outputs when
using Sphinx LaTeX output and pdflatex. Please notice that this *won't* fix
all bugs. A lot more similar hacks is needed, as it seems that Sphinx LaTeX
is broken for non-trivial tables.
Signed-of
On Mon, Aug 15, 2016 at 04:42:18PM +0100, Chris Wilson wrote:
> Rendering operations to the dma-buf are tracked implicitly via the
> reservation_object (dmabuf->resv). This is used to allow poll() to
> wait upon outstanding rendering (or just query the current status of
> rendering). The dma-buf sy
Rendering operations to the dma-buf are tracked implicitly via the
reservation_object (dmabuf->resv). This is used to allow poll() to
wait upon outstanding rendering (or just query the current status of
rendering). The dma-buf sync ioctl allows userspace to prepare the
dma-buf for CPU access, which
Rendering operations to the dma-buf are tracked implicitly via the
reservation_object (dmabuf->resv). This is used to allow poll() to
wait upon outstanding rendering (or just query the current status of
rendering). The dma-buf sync ioctl allows userspace to prepare the
dma-buf for CPU access, which
Hi,
I have PCI_e tbs6928(FE)-linux tbs driver; usb TT 3650CI-media build drivers.
For both cards noticing the same problem-astra 23.5;dvb-s2 transp.(not all).
It's about problem drivers.Tested with dvblast, mumudvb, vdr.
~$ dvblast -f 12363000
...
warning: TS discontinuity on pid 18 expected_c
From: Markus Heiser
Add a index if only a sub-folder is build e.g.::
make SPHINXDIRS=media cleandocs htmldocs
BTW: removed dead search link in the top-index file
Signed-off-by: Markus Heiser
---
Documentation/gpu/conf.py | 2 ++
Documentation/gpu/index.rst | 7 +++
Documentation/
The primary reason for this change is to prepare for Gen3 support where
there will be more then one possible video source. Each source will have
its own media bus format and code, so it needs to be moved from the per
device structure to a structure used to represent an individual
connection to a vi
This is done in preparation for Gen3 support where media controller
support will be mandatory for the driver.
Signed-off-by: Niklas Söderlund
---
drivers/media/platform/rcar-vin/Kconfig | 2 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 7 +--
2 files changed, 2 insertions(+), 7 delet
Fix a error from the original driver where the wrong error code is
returned if the driver fails to get a IRQ number from
platform_get_irq().
Signed-off-by: Niklas Söderlund
---
drivers/media/platform/rcar-vin/rcar-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/dri
Hi,
This series cleans up issues that have been found in the driver and
prepares it for Gen3 support. The series is based on v4.8-rc1 and is
tested om Koelsch. The most noteworthy fix in in the series is patch
9/10 that fixes a of_node_put() warning during loading of the driver.
The series is
Fix a error from the original driver where v4l2_device_call_until_err()
where used for the pad specific v4l2 operation set_fmt. Also fix up the
error path from this fix so if there is an error it will be propagated
to the caller.
The error path label have also been renamed as a result from a
nitp
The check for if the specific pixelformat is supported on the current
chip should happen in VIDIOC_S_FMT and VIDIOC_TRY_FMT and not when we
try to setup the hardware for streaming.
Signed-off-by: Niklas Söderlund
---
drivers/media/platform/rcar-vin/rcar-dma.c | 8 +++-
drivers/media/platfor
Align style with the rest of the driver.
Signed-off-by: Niklas Söderlund
---
drivers/media/platform/rcar-vin/rcar-v4l2.c | 22 --
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
b/drivers/media/platform/rcar-vin/rca
The original drivers code to find a subdevice by looking in the DT grpah
and how the callbacks to the v4l2 async bind framework where poorly
written. The most obvious example of badness was the duplication of data
in the struct rvin_graph_entity.
This patch removes the data duplication, simplifies
Fix broken indentations and line breaks.
Signed-off-by: Niklas Söderlund
---
drivers/media/platform/rcar-vin/rcar-v4l2.c | 46 +
1 file changed, 21 insertions(+), 25 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
b/drivers/media/platform/rcar-
Signed-off-by: Niklas Söderlund
---
drivers/media/platform/rcar-vin/rcar-vin.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h
b/drivers/media/platform/rcar-vin/rcar-vin.h
index 31ad39a..b9274132 100644
--- a/drivers/media/platform/r
When Gen3 support is added to the driver more then one possible video
source entity will be possible. Knowing that the name entity is a bad
one, rename it to digital since it will deal with the digital input
source.
Signed-off-by: Niklas Söderlund
---
drivers/media/platform/rcar-vin/rcar-core.c
Hans Verkuil writes:
> On 08/15/2016 03:26 PM, Robert Jarzmik wrote:
>> Robert Jarzmik writes:
>> I've seen no documentation on the rules applicable to this sequence number:
>> - should it be reset if a "start streaming" operation occurs ?
>
> start_streaming is the recommended place for settin
From: Markus Heiser
Moved the *duplicate C object description* warnings for function
declarations in the nitpicky mode. In nitpick mode, you can suppress
those warnings (e.g. ioctl) with::
nitpicky = True
nitpick_ignore = [
("c:func", "ioctl"),
]
See Sphinx documentation for the con
From: Markus Heiser
Add option 'name' to the "c:function:" directive. With option 'name'
the ref-name of a function can be modified. E.g.::
.. c:function:: int ioctl( int fd, int request )
:name: VIDIOC_LOG_STATUS
The func-name (e.g. ioctl) remains in the output but the ref-name
cha
From: Markus Heiser
This is only one example, demonstrating the benefits of the patch
series. The CEC_DQEVENT ioctl is migrated to the sphinx c-domain and
referred by ":name: CEC_DQEVENT".
With this change the indirection using ":ref:`CEC_DQEVENT` is no longer
needed, we can refer the ioctl dir
From: Markus Heiser
Add a sphinx-extension to customize the sphinx c-domain. No functional
changes right yet, just the boilerplate code.
Signed-off-by: Markus Heiser
---
Documentation/conf.py | 2 +-
Documentation/sphinx/cdomain.py | 44 +
2
From: Markus Heiser
Hi,
this is my approach to eliminate some distortions we have with the c/cpp Sphinx
domains. The C domain is simple: it assumes that all functions, enums, etc
are global, e. g. there should be just one function called "ioctl", or "open".
With the 'name' option e.g.:
.. c
From: Markus Heiser
This reverts commit a88b1672d4ddf9895eb53e6980926d5e960dea8e.
>From the origin comit log::
The RST cpp:function handler is very pedantic: it doesn't allow any
macros like __user on it
Since the kernel-doc parser does NOT make use of the cpp:domain, there
is no need to c
Two new CEC utilities have been added to the v4l-utils repository:
https://git.linuxtv.org/v4l-utils.git/
The cec-follower utility can emulate a CEC device, implementing the
follower functionality needed.
The cec-compliance utility can test a remote CEC device and check how
compliant it is agai
On 08/15/2016 03:26 PM, Robert Jarzmik wrote:
> Robert Jarzmik writes:
>
>> Add sequence numbers to completed buffers.
>>
>> Signed-off-by: Robert Jarzmik
>> ---
>> drivers/media/platform/soc_camera/pxa_camera.c | 5 +
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/media/plat
Robert Jarzmik writes:
> Add sequence numbers to completed buffers.
>
> Signed-off-by: Robert Jarzmik
> ---
> drivers/media/platform/soc_camera/pxa_camera.c | 5 +
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/media/platform/soc_camera/pxa_camera.c
> b/drivers/media/platform/s
On 08/09/2016 03:58 PM, Minghsiu Tsai wrote:
> Add MDP driver for MT8173
>
> Signed-off-by: Minghsiu Tsai
> ---
> drivers/media/platform/Kconfig| 16 +
> drivers/media/platform/Makefile |2 +
> drivers/media/platform/mtk-mdp/Makefile |9 +
> drivers/
Am 22.07.2016 um 16:46 schrieb Mauro Carvalho Chehab :
> The RST cpp:function handler is very pedantic: it doesn't allow any
> macros like __user on it:
>
> Documentation/media/kapi/dtv-core.rst:28: WARNING: Error when parsing
> function declaration.
> If the function has no return
Robert Jarzmik writes:
> As the conversion to a v4l2 standalone device is finished, move
> pxa_camera one directory up and finish severing any dependency to
> soc_camera.
> diff --git a/drivers/media/platform/soc_camera/Kconfig
> b/drivers/media/platform/soc_camera/Kconfig
> index 0bf33ccf9a1e.
On Mon, Aug 15, 2016 at 10:48 AM, Hans Verkuil wrote:
> On 08/15/2016 10:37 AM, Ulrich Hecht wrote:
>> On Sat, Aug 13, 2016 at 3:30 PM, Hans Verkuil wrote:
>>> On 07/22/2016 11:09 AM, Ulrich Hecht wrote:
Adds G_EDID and S_EDID.
Signed-off-by: Ulrich Hecht
---
drivers/me
Hi Hans,
On Mon, 2016-08-15 at 11:07 +0200, Hans Verkuil wrote:
> On 08/15/2016 11:03 AM, Tiffany Lin wrote:
> > Hi Hans,
> >
> > I upstream v4 on 8/10, I don't know why this version is not shown in
> > https://patchwork.kernel.org.
> > But I could see it in other link.
> > http://www.spinics.ne
On 08/15/2016 11:03 AM, Tiffany Lin wrote:
> Hi Hans,
>
> I upstream v4 on 8/10, I don't know why this version is not shown in
> https://patchwork.kernel.org.
> But I could see it in other link.
> http://www.spinics.net/lists/arm-kernel/msg523095.html
> I refine DocBook and vb2 queue_setup functio
Hi Hans,
I upstream v4 on 8/10, I don't know why this version is not shown in
https://patchwork.kernel.org.
But I could see it in other link.
http://www.spinics.net/lists/arm-kernel/msg523095.html
I refine DocBook and vb2 queue_setup function in v4.
For the MT21 format, if I put MT21 into separat
On 08/15/2016 10:37 AM, Ulrich Hecht wrote:
> On Sat, Aug 13, 2016 at 3:30 PM, Hans Verkuil wrote:
>> On 07/22/2016 11:09 AM, Ulrich Hecht wrote:
>>> Adds G_EDID and S_EDID.
>>>
>>> Signed-off-by: Ulrich Hecht
>>> ---
>>> drivers/media/platform/rcar-vin/rcar-v4l2.c | 33
>>>
On Sat, Aug 13, 2016 at 3:30 PM, Hans Verkuil wrote:
> On 07/22/2016 11:09 AM, Ulrich Hecht wrote:
>> Adds G_EDID and S_EDID.
>>
>> Signed-off-by: Ulrich Hecht
>> ---
>> drivers/media/platform/rcar-vin/rcar-v4l2.c | 33
>> +
>> 1 file changed, 33 insertions(+)
>>
>>
Hi Tiffany,
This needs a v4: the DocBook format has been replaced by sphinx, and I also see
that
the vb2 queue_setup function is out-of-date (the allocation contexts no longer
exist).
There were also a lot of comments about the MT21 format. I recommend splitting
off the
code adding MT21 into s
Am 14.08.2016 um 20:09 schrieb Jonathan Corbet :
> On Sat, 13 Aug 2016 16:12:41 +0200
> Markus Heiser wrote:
>
>> this series is a consolidation on Jon's docs-next branch. It merges the
>> "sphinx
>> sub-folders" patch [1] and the "parseheaders directive" patch [2] on top of
>> Jon's docs-next
On 08/02/2016 09:35 AM, Hans Verkuil wrote:
>
>
> On 08/01/2016 10:41 PM, Niklas Söderlund wrote:
>> On 2016-08-01 11:31:11 +0300, Laurent Pinchart wrote:
>>> Hi Hans,
>>>
>>> Thank you for the patch.
>>>
>>> On Monday 01 Aug 2016 09:54:24 Hans Verkuil wrote:
From: Hans Verkuil
Th
This patch series adds support for /dev/v4l-touchX devices.
Regards,
Hans
The following changes since commit b6aa39228966e0d3f0bc3306be1892f87792903a:
Merge tag 'v4.8-rc1' into patchwork (2016-08-08 07:30:25 -0300)
are available in the git repository at:
git://linuxtv.org/hverkuil
Fix copy-and-paste error: the radio devices are /dev/radio, not /dev/vbi.
Signed-off-by: Hans Verkuil <
---
diff --git a/Documentation/media/uapi/mediactl/media-types.rst
b/Documentation/media/uapi/mediactl/media-types.rst
index 0265edc..a0f737a 100644
--- a/Documentation/media/uapi/mediactl/medi
On 8/15/2016 15:34, Hans Verkuil wrote:
On 08/11/2016 09:06 AM, Songjun Wu wrote:
The Image Sensor Controller driver includes two parts.
1) Driver code to implement the ISC function.
2) Device tree binding documentation, it describes how
to add the ISC in device tree.
So close...
Running
On 08/11/2016 09:06 AM, Songjun Wu wrote:
> The Image Sensor Controller driver includes two parts.
> 1) Driver code to implement the ISC function.
> 2) Device tree binding documentation, it describes how
>to add the ISC in device tree.
So close...
Running checkpatch gives me:
WARNING: added,
Various fixes for 4.8 for the new mediatek encoder driver.
Hans
The following changes since commit b6aa39228966e0d3f0bc3306be1892f87792903a:
Merge tag 'v4.8-rc1' into patchwork (2016-08-08 07:30:25 -0300)
are available in the git repository at:
git://linuxtv.org/hverkuil/media_tree
On 8/15/2016 15:15, Hans Verkuil wrote:
On 08/15/2016 08:09 AM, Wu, Songjun wrote:
On 8/12/2016 15:32, Hans Verkuil wrote:
One quick question:
On 08/11/2016 09:06 AM, Songjun Wu wrote:
The Image Sensor Controller driver includes two parts.
1) Driver code to implement the ISC function.
2)
On 08/15/2016 09:14 AM, Markus Heiser wrote:
> Hi Hans,
>
> you don't need to change the header underlines if you don't want.
> Any file could start with e.g. "===" headers marking the top
> section and "---" marking the subsections, independent on which
> level this file is included in a toctree
On 08/15/2016 08:09 AM, Wu, Songjun wrote:
>
>
> On 8/12/2016 15:32, Hans Verkuil wrote:
>> One quick question:
>>
>> On 08/11/2016 09:06 AM, Songjun Wu wrote:
>>> The Image Sensor Controller driver includes two parts.
>>> 1) Driver code to implement the ISC function.
>>> 2) Device tree binding d
Hi Hans,
you don't need to change the header underlines if you don't want.
Any file could start with e.g. "===" headers marking the top
section and "---" marking the subsections, independent on which
level this file is included in a toctree.
http://static.lwn.net/kerneldoc/kernel-documentation.h
Passed v4l2-compliance, see https://patchwork.linuxtv.org/patch/35671/
for more details about the device.
Regards,
Hans
Change since v2: fix commit log of first patch: contained text that should have
been removed.
Change since v1: fix Kconfig dependency.
The following changes since com
83 matches
Mail list logo