Questions about dvbv5-scan (missing fields)

Hi I hope this is the right list to ask. I am looking at using dvbv5 for one of my projects. However there are some fields that I cant seem to get, in particular tsid pmt service_type (TV?Radio etc) net netid example output in VDR format CBS

Disappearing dvb-usb stick IT9137FN (Kworld 499-2T)

Hi I have the above usb stick (dual frontend) which works fine for a while then just vanishes. ie: frontend just goes eg ls /dev/dvb (I have a permanent DVB card as well) /dev/dvb/adapter0 /dev/dvb/adapter1 /dev/dvb/adapter2 goes to ls /dev/dvb (I have a permanent DVB card as well)

dvb-usb-it913x dissapeared kernel 3.7.2

After updating the kernel on Fedora 18 module dvb-usb-it913x seems to have dissapeared. This has meant my dvb stick ( ID 1b80:e409 Afatech IT9137FN Dual DVB-T [KWorld UB499-2T]) no longer works Is this a Redhat only thing or is it upstream -- To unsubscribe from this list: send the line

DVB - attach to an open frontend device

Not too sure if this is possible but what I want to do is this open frontend set frequency add demux filters etc record then while this is running I want to attach to the same process and add further demux filters (without retuning - same frequency) any tips? -- To unsubscribe from this list:

Accessing running dvb device

Hi I am trying to run multiple recordings on my dvb device (rtl2832). However when I try to access the frontend settings when a recording is active get_frontend returns nothing. This is using the Linux::DVB::DVBT module any suggestions -- To unsubscribe from this list: send the line

rtl2832u usb dvb id 1b80:d395

hi Still have one or two probs I have tried both anttis and jan trees, both of them compile but do not load modules or create dvb device when modprobed Using the realtek driver (1.4.2) I have the following issue one (and now only one) mux fails to pick up any channels, the channels are as clear

rtl2832u usb dvb id 1b80:d395

hi Still have one or two probs I have tried both anttis and jan trees, both of them compile but do not load modules or create dvb device when modprobed Using the realtek driver (1.4.2) I have the following issue one (and now only one) mux fails to pick up any channels, the channels are as clear

Re: Problems with using dvb_usb_rtl2832u

On 27 November 2010 17:05, Mike Martin m...@redtux.org.uk wrote: On 27 November 2010 16:33, Anca Emanuel anca.eman...@gmail.com wrote: On Sat, Nov 27, 2010 at 6:14 PM, Mike Martin redt...@gmail.com wrote: Hi I am using this driver with USB 1b80:s395 It's not possible to be s395, please send

Problems with using dvb_usb_rtl2832u

Hi I am using this driver with USB 1b80:s395 Modules load scandvb gets channels /dev/dvb gets created dvbtune seems to tune to transponder however none of the other dvb utilities seem to work ie: dvbdate dvbsnoop (except forfeinfo) dvbtraffic dvbstream example dvbsnoop -s feinfo dvbsnoop

Problems with using dvb_usb_rtl2832u

Hi I am using this driver with USB 1b80:s395 Modules load scandvb gets channels /dev/dvb gets created dvbtune seems to tune to transponder however none of the other dvb utilities seem to work ie: dvbdate dvbsnoop (except forfeinfo) dvbtraffic dvbstream example dvbsnoop -s feinfo dvbsnoop

Re: Problems with using dvb_usb_rtl2832u

On 27 November 2010 16:33, Anca Emanuel anca.eman...@gmail.com wrote: On Sat, Nov 27, 2010 at 6:14 PM, Mike Martin redt...@gmail.com wrote: Hi I am using this driver with USB 1b80:s395 It's not possible to be s395, please send what lsusb prints. And if you have other info, like the product

Re: Problem with Compro T200 (TDA1004x) and tuning Hi

On 22 November 2010 06:08, hermann pitton hermann-pit...@arcor.de wrote: Hi Mike, Am Sonntag, den 21.11.2010, 17:58 + schrieb Mike Martin: I am trying to tune channels with this card (which seems to be installed OK). However the output is Using DVB card Philips TDA10046H DVB-T tuning

Problem with HVR 900 (B2C0) and USB detection

Hi I have been using this device for years using Markuses Driver. Now for some bizarre reason using both this driver and devins the wrong USB driver is being used (ohci rather than ehci), which means it is recognised as a USB 1.1 device, which makes it stop working Anyone know if there is any

Problem with Compro T200 (TDA1004x) and tuning Hi

I am trying to tune channels with this card (which seems to be installed OK). However the output is Using DVB card Philips TDA10046H DVB-T tuning DVB-T (in United Kingdom) to 497833000 Hz polling Getting frontend event FE_STATUS: polling polling polling etc,etc -- To unsubscribe

Scan-file for uk-Aberdare

Attached is a working scan file for uk-Aberdare post switchover uk-Aberdare_dso Description: Binary data

Scan not getting Channel names after DSO

Hi on one (and only one I think) multiplex after digital switchover I am getting the following [6440]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:101:102:25664