Hi,
sorry for the late response. Unfortunately my Skystar HD2 died on me and
it looks like i get an other card in exchange.
Anyway, as far I could test, the patches were ok to me. I can still put
my marks, but I'm not sure which ones I should use or I'm allowed to use.
Regards,
Manuel
Am 01
Hi Steinar,
thanks for the help with the driver!
I started some testing and so far the changes seem to be fine, but I
still get freezes from time to time. I have to admit that I still need
to test if I get the same error with other applications than mythtv.
Anyway I would like to see the chan
Am 13.12.2011 22:30, schrieb Ninja:
Am 12.12.2011 12:08, schrieb Marko Ristola:
On 12/10/2011 01:57 AM, Ninja wrote:
Hi,
has anyone an idea how the SMP problems could be fixed?
You could turn on Mantis Kernel module's debug messages.
It could tell you the emitted interrupts.
One
Am 12.12.2011 12:08, schrieb Marko Ristola:
On 12/10/2011 01:57 AM, Ninja wrote:
Hi,
has anyone an idea how the SMP problems could be fixed?
You could turn on Mantis Kernel module's debug messages.
It could tell you the emitted interrupts.
One risky thing with the Interrupt handler co
Hello,
I have three Cinergy C (DVB-C cards) like this:
05:04.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
Subsystem: TERRATEC Electronic GmbH Device 1178
Flags: bus master, medium devsel, latency 128, IRQ 20
Hi,
has anyone an idea how the SMP problems could be fixed?
I did some further investigation. When comparing the number of
interrupts with all cores enabled and the interrupts with only one core
enabled it seems like only the IRQ0 changed, the other IRQs and the
total number stays quite the sa
Hi,
I'm using a Technisat Skystar HD2 (DVB-S2) with a CI Module under Ubuntu
11.04.
As some people already noticed, the mantis_ca_init() is never called to
initialize the CAM.
Since s2-liplianin used almost the same code, I basically just put the
mantis_ca_init back in,
which is working quite
Hi,
I'm using a Technisat Skystar HD2 (DVB-S2) with a CI Module under Ubuntu
11.04.
As some people already noticed, the mantis_ca_init() is never called to
initialize the CAM.
Since s2-liplianin used almost the same code, I basically just put the
mantis_ca_init back in,
which is working quite
Hi,
I'm using a Technisat Skystar HD2 (DVB-S2) with a CI Module under Ubuntu
11.04.
As some people already noticed, the mantis_ca_init() is never called to
initialize the CAM.
Since s2-liplianin used almost the same code, I basically just put the
mantis_ca_init back in,
which is working quite
