Den 2015-10-01 kl. 23:01, skrev Roger Mårtensson:
Den 2015-09-19 kl. 19:30, skrev Erik Andresen:
Adds Terratec H7 Rev. 4 with USB id 0ccd:10a5 to DVBSky driver.
I have tested this on a Custom Linux 4.2 kernel and it is working as
expected.
Noticed a few things.
1) "Supported:&q
Den 2015-09-19 kl. 19:30, skrev Erik Andresen:
Adds Terratec H7 Rev. 4 with USB id 0ccd:10a5 to DVBSky driver.
I have tested this on a Custom Linux 4.2 kernel and it is working as
expected.
Noticed a few things.
1) "Supported:" on ir-keytable doesn't show anything.
1b) Setting RC-5 with ir-k
try to give it the device, e.g.
ir-keytable -d /dev/input/event14 -t
I was able to get output from it. The device is now running for a week under
mythbackend.
I got this to work but needed to create my own keymap since Ubuntu 14.04
didn't have it.
greetings,
Erik
Am 19.09.2015 um 23:48 s
Den 2015-09-19 kl. 23:39, skrev Roger Mårtensson:
Den 2015-09-11 kl. 17:04, skrev Erik Andresen:
Hi,
I recently got a Terratec H7 in Revision 4 and turned out that it is not
just a new revision, but a new product with USB ProductID 0x10a5.
Previous revisions have been AZ6007, but this revision
Den 2015-09-11 kl. 17:04, skrev Erik Andresen:
Hi,
I recently got a Terratec H7 in Revision 4 and turned out that it is not
just a new revision, but a new product with USB ProductID 0x10a5.
Previous revisions have been AZ6007, but this revision does not work
with this driver [1].
Output of lsus
Antti Palosaari skrev 2012-08-27 12:03:
On 08/26/2012 10:52 PM, Roger Mårtensson wrote:
The pattern are:
* Open up device / Start Kaffeine
* Tune to encrypted channel / Choose channel in Kaffeine
* Close Device / Close Kaffeine
* Open device / Start Kaffeine
* Watch channel
The exact procedure
Hello!
Just a reminder that az6007 with CI still isn't working 100% with Kaffeine.
But since I use my device with MythTV that uses the same usage pattern
as my workaround for Kaffeine it works like a charm.
The pattern are:
* Open up device / Start Kaffeine
* Tune to encrypted channel / Choose
Mauro Carvalho Chehab skrev 2012-08-05 19:44:
Those are mostly cleanup patches. With regards to suspend/resume,
this is not working properly yet. I suspect that it is due to the lack
of dvb-usb-v2 support for reset_resume. So, document it.
Mauro Carvalho Chehab (3):
[media] az6007: rename "st
Antti Palosaari skrev 2012-03-18 17:54:
> On 18.03.2012 16:49, Roger Mårtensson wrote:
>>
>> My problem is as follows:
>> When viewing encrypted channels I can watch without problem.
>> When I change to another encrypted channel inside kaffeine nothing
>> happen
Hi!
I get compile errors when trying to build media_build as of 2012-04-13.
/home/mythfrontend/media_build/v4l/ivtv-fileops.c: In function
'ivtv_v4l2_enc_poll':
/home/mythfrontend/media_build/v4l/ivtv-fileops.c:751:2: error: implicit
declaration of function 'poll_requested_events'
[-Werror=im
Hello!
This mail is a small request to see if anyone else except me that has
problem with viewing encrypted channels.
My problem is as follows:
When viewing encrypted channels I can watch without problem.
When I change to another encrypted channel inside kaffeine nothing
happens. The EPG tell
Jose Alberto Reguero skrev 2012-03-15 13:29:
On Miércoles, 14 de marzo de 2012 18:45:24 Roger Mårtensson escribió:
So the drivers is doing something except I don't get anything in
kaffeine until I restart the application.
Now and then I even have to restart kaffeine twice. Same as above..
Hello!
Sorry for the top post but this is just to check with you if you have
experienced the same problem that I have. See below with some additional
comments.
Roger Mårtensson skrev 2012-03-07 20:21:
Jose Alberto Reguero skrev 2012-03-06 00:23:
On Lunes, 5 de marzo de 2012 21:42:48 Roger
Jose Alberto Reguero skrev 2012-03-06 00:23:
On Lunes, 5 de marzo de 2012 21:42:48 Roger Mårtensson escribió:
No. I tested the patch with DVB-T an watch encrypted channels with vdr without
problems. I don't know why you can't. I don't know gnutv. Try with other
software if you
Jose Alberto Reguero skrev 2012-03-05 00:22:
This patch add CI support to az6007 driver.
Signed-off-by: Jose Alberto Reguero
Since I have this device and have access to a CAM-card and program card
to access the encrypted channels(DVB-C) I thought I should try this
patch and report my finding
Hi!
I noticed that support for Terratec H7 arrived not long ago. Thank you
very much.
It works very well in kaffeine and gnutv(the only applications tested at
the moment). I have tried it with DVB-C without any problems as long as
I choose unencrypted channels.
I haven't tried DVB-T but I gu
Mauro Carvalho Chehab skrev 2012-01-21 17:04:
Terratec H7 is a Cypress FX2 device with a mt2063 tuner and a drx-k
demod. This series add support for it. It started with a public
tree found at:
http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz
The driver were
Mauro Carvalho Chehab skrev 2012-01-21 17:04:
Terratec H7 is a Cypress FX2 device with a mt2063 tuner and a drx-k
demod. This series add support for it. It started with a public
tree found at:
http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz
I hope this dri
Hello! (again)
Am I the only one with a KNC1 DVB-C TDA10024(clone) card that is trying
to use a CAM(smit)?
Is there anyone else that have got this to work? In the code it says
it's compatible with TDA10023 som the KNC1 DVB-C MK3 card should be
identical? (It's identical in code anyway)
Symto
Roger Mårtensson skrev 2011-10-08 12:32:
Hej(Hello)!
The hardware I got is a mystique DVB-C Card but it seems to a KNC1
TV-Station MK3 clone.
08:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7146
[1131:7146] (rev 01)
Subsystem: KNC One Device [1894:0028]
Flags
Hej(Hello)!
I'm the one that posted about non responding CAM earlier. I got another
CAM I had laying around to work but now it's different problems.
With this SMIT Conax CAM(Earlier it was a Dilog Conax) I can decode but
the resulting mpg-stream degrades fast to something unwatchable.
The t
21 matches
Mail list logo
