Hi all,
With a 3.19-rc3 kernel i'm running into the warning below on boot with a
pvrusb2 device.
It's hitting this warn:
/*
* Drivers MUST fill in device_caps, so check for this and
* warn if it was forgotten.
*/
WARN_ON(!(cap-capabilities
-byte buffer to receive
the read value.
While here, let's remove the urb_buf array which was meant for a similar
purpose, but never really used.
Cc: Alan Stern st...@rowland.harvard.edu
Reported-by: Sander Eikelenboom li...@eikelenboom.it
Ouch, I forgot to Cc Sander!
Sander, Here's
Hi,
With a 3.15-rc3 kernel i seem to reliably trigger these warnings (which don't
trigger on 3.14.2) when stopping a video stream. They don't seem to cause to
much havoc because the devices are still usable after this.
It seems to happen with both this syntek device as with em28xx devices.
--
.
While here, let's remove the urb_buf array which was meant for a similar
purpose, but never really used.
Reported-by: Sander Eikelenboom li...@eikelenboom.it
Signed-off-by: Ezequiel Garcia ezequiel.gar...@free-electrons.com
---
Sander, Hans:
Does this cause any regressions, other than the DMA
Hi,
I'm hitting this warning on boot with a syntek usb video grabber, it's not
clear
to me if it's a driver issue of the stk1160 or a generic ehci issue.
This is with a 3.15-mergewindow kernel (pull of Linus his tree of today).
--
Sander
[5.587759] [ cut here ]
[
Sunday, July 14, 2013, 11:41:13 AM, you wrote:
Hi Sander,
On 07/12/2013 10:56 PM, Sander Eikelenboom wrote:
Friday, May 17, 2013, 11:52:17 AM, you wrote:
On Fri May 17 2013 11:04:50 Sander Eikelenboom wrote:
Friday, May 17, 2013, 10:25:24 AM, you wrote:
On Thu May 16 2013 19:41:42
Friday, May 17, 2013, 11:52:17 AM, you wrote:
On Fri May 17 2013 11:04:50 Sander Eikelenboom wrote:
Friday, May 17, 2013, 10:25:24 AM, you wrote:
On Thu May 16 2013 19:41:42 Sander Eikelenboom wrote:
Hi Hans / Mauro,
With 3.10.0-rc1 (including the cx25821 changes from Hans), I get
Friday, May 17, 2013, 10:25:24 AM, you wrote:
On Thu May 16 2013 19:41:42 Sander Eikelenboom wrote:
Hi Hans / Mauro,
With 3.10.0-rc1 (including the cx25821 changes from Hans), I get the bug
below which wasn't present with 3.9.
How do I reproduce this? I've tried to, but I can't make
Friday, May 17, 2013, 11:52:17 AM, you wrote:
On Fri May 17 2013 11:04:50 Sander Eikelenboom wrote:
Friday, May 17, 2013, 10:25:24 AM, you wrote:
On Thu May 16 2013 19:41:42 Sander Eikelenboom wrote:
Hi Hans / Mauro,
With 3.10.0-rc1 (including the cx25821 changes from Hans), I get
Hi Hans / Mauro,
With 3.10.0-rc1 (including the cx25821 changes from Hans), I get the bug below
which wasn't present with 3.9.
--
Sander
[ 53.004968] =
[ 53.004968] [ BUG: bad unlock balance detected! ]
[ 53.004968] 3.10.0-rc1-20130516-jens+ #1 Not
Sander,
On Saturday 28 April 2012 22:02:46 Sander Eikelenboom wrote:
Hi,
I'm using a webcam (logitech) supported by the uvcvideo module to capture
video. Previously once in a while I would get the uvcvideo: Failed to
resubmit video URB (-27)., but the grabbing continued without a problem.
Now
Hi,
I'm using a webcam (logitech) supported by the uvcvideo module to capture video.
Previously once in a while I would get the uvcvideo: Failed to resubmit video
URB (-27)., but the grabbing continued without a problem.
Now the video grabbing program (motion) seems to lock due to some nested
Hi Hans/Mauro,
Is there any support for the combination of CX25853 and CX25821 (8/16 channel
dvr h264 pcie capture cards) ?
I have found some old references to some development
http://permalink.gmane.org/gmane.linux.drivers.video-input-infrastructure/9982
And a ancient tree referenced in that
Wednesday, August 11, 2010, 4:33:28 AM, you wrote:
On Tue, Aug 10, 2010 at 6:57 PM, Sander Eikelenboom
li...@eikelenboom.it wrote:
Hello Devin,
It's a k-world, which used to work fine (altough with another program, but I
can't use that since it seems at least 2 other bugs prevent me from using
at 09:25 +0200, Sander Eikelenboom wrote:
Hello Devin,
Yes it's completely reproducible for a change:
ffmpeg -f video4linux -r 25 -s 720x576 -i /dev/video0 out.flv
gave an error:
Use -f video4linux2.
The -f video4linux option uses the old video4linux1 API. I have seen
similar strange
to grab with ffmpeg.
--
Sander
Wednesday, August 11, 2010, 12:45:20 AM, you wrote:
Hello Sander,
Which application were you using, and specifically which em28xx based
product do you have?
Devin
On Tue, Aug 10, 2010 at 6:12 PM, Sander Eikelenboom
li...@eikelenboom.it wrote:
Hi,
While
Hello Mauro,
With the patch the NULL pointer dereference is fixed.
Thx,
Sander
Sunday, December 6, 2009, 1:53:40 AM, you wrote:
Sander Eikelenboom wrote:
Hi All,
Tried to update my v4l-dvb modules today, but got a bug with my pinnacle
card, seems to be related to the recent changes
Hi All,
Tried to update my v4l-dvb modules today, but got a bug with my pinnacle card,
seems to be related to the recent changes in the ir code.
I have added dmesg output of the bug (changeset a871d61b614f tip), and dmesg
output of the previous modules (working).
--
Sander
Dec 5 23:30:25
18 matches
Mail list logo